• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.6
• /
• pp.64-72
• /
• 2004

This study analyses influences on partial work rates under whole work rates on landscape constructions in Ulsan Grand Park. The schedule management is one of the factors that are very important to the process management of landscape construction. The time process of the whole construction is supposed to be affected by several kinds of work that organize the whole construction. First, this study divides the construction of Ulsan Grand Park into 10 kinds of works: earth work, rain and sanitary sewage water work, water-supplying work, planting work, paving work, water proofing work, fountain work, instituting work and temporary work. Then the time-process curves of all kinds of work are statistically compared to that of the whole construction. The trial methods of statistics are lineal regression, non-lineal regression, and principal analysis. In the result of the non-lineal regression, the rain and sanitary sewage water work, the water-supplying work and the earth work strongly affected the whole construction. The principal analysis results show that the whole construction is affected strongly by the water-supplying work, the rain and sanitary sewage water work and the earth work. However the lineal regression is shown to be senseless because of its high collinearity.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.203-206
• /
• 2009

Agglomeration of catalysts is known as one of the major degradation mechanisms. Reforming of liquid fuel, which requires high temperature over $800^{\circ}C$, accelerates agglomeration of catalysts. In this work, The effects of agglomeration on catalysts activity in partial oxidation reforming conditions were investigated. Metal supported catalysts(Pt-CGO, Ru-CGO) were compared to perovskite-structured catalysts(NECS-P1, NECS-P2). High thermal stability of perovskite-structured catalysts was reported. Micro-reactor installed in electric furnace was used. its Temperature was raised from $800^{\circ}C$ to $1000^{\circ}C$ to accelerate agglomeration effect. To measure rate of agglomeration, BET analysis and CO pulse chemisorption were conducted on catalysts exposed to $1100^{\circ}C$. Metal supported catalysts showed degradation at $1000^{\circ}C$ and The rates were different according to metal supported. On the other hand perovskite-structured catalysts showed no degradation at $1000^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4874-4880
• /
• 2014

This study examined the effects of cultural facilities and city parts on the regional suicide rates in Korea. Data of theaters, exhibition facilities, libraries and city parts was collected in 143 local areas governments. The number of theaters and the size of city parts had a significant effect on decreasing the regional suicide rates in the areas, and the number of exhibition facilities had partial impacts. This result suggests that the dynamic components of a culture and arts environments may work more effectively to relieve depression and stress and decrease the suicide rates. This study suggests that the cultural welfare environments can be found to solve the problem of the high suicide rates in Korea.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.8 no.4
• /
• pp.24-31
• /
• 2011

Double-color Injection molding machine is the assembly of many kinds of mechanical, fluid power part and electric electronic control system. From in these, fluid power is a part where becomes the first core of this machine. Fluid power systems of double-color injection molding machine are modelled and analyzed using a commercial program AMESim. Partial system models which is divided according to functional operation are made and its analysis results shows how design parameters work on operational characteristics like pressure, flow rates, displacement at each node and so on. Analysis modeling and compared the data which gets from experiment and the analysis result which has a reliability got data. The results made by analysis will be used design of fluid power circuit for developing a double-color injection molding machine.

• Korean Journal of Head & Neck Oncology
• /
• v.6 no.1
• /
• pp.11-23
• /
• 1990

Systemic chemotherapy is usually regarded as the standard treatment for palliation in patients with recurrent or metastatic cancer who have failed the definite local treatment with surgery and/or radiotherapy. Recently, with the introduction of more active chemotherapeutic agents and combinations, systemic chemotherapy is being increasingly used before or after local therapy in patients with previously untreated locally advanced head and neck cancer. The most active agents for the head and neck caner are methotrexate, 5-fluorouracil (5-FU), cisplatin and bleomycin. The overall response rates to each of these four drugs are 15-30% expecially when used as first line therapy. But most of these responses are partial with a mean duration of 3-5 months. Various combinations with methotrexate, 5-FU, cisplatin, and bleomycin have been tried with overall response rates of 50-90%, and 10-20% of complete responses. The introduction of chemotherapy prior to local therapy, induction chemotherapy, has been investigated with improved survivals in patients with complete response, especially pathologic, though improvement in overall survival has not been proved yet after the induction chemotherapy. Other therapeutic modalities, such as 'Sandwich' chemotherapy between surgery and radiotherapy, concomittent chemo-radiotherapy and post local treatment adjuvant chemotherapy have been pursued with some hopeful results but these trials should be compared with prospective randomized Phase III trials. To increase the response rates and enhance the survival, important work still remains; 1. Identification of better prognostic factors, 2. Improvement in staging, 3. Development of more active and safter chemotherapeutic agents, 4. Identification of the proper sequence for the addition of chemotherapy to multimodality treatment, and 5. Testing the value of such chemotherapy in locally advanced cancer patients.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.1
• /
• pp.46-58
• /
• 2011

A steady-state analysis and a simple dynamic model as simplified methods are developed, and results of energy consumption loads are compared with results obtained using computer to evaluate the analytical solution. Before obtaining simplified model a mathematical model is formulated for the effect of wall mass on the thermal performance of four different houses having various wall construction. This analytical study was motivated by the experimental work of Burch et al. An analytical solution of one-dimensional, linear, partial differential equation for wall temperature profiles and room air temperatures is obtained using the Laplace transform method. Typical Meteorological Year data are processed to yield hourly average monthly values. This study is conducted using weather data from four different locations in the United States: Albuquerque, New mexico; Miami, Florida; Santa Maria, California; and Washington D.C. for both winter and summer conditions. The steady state analysis that does not include the effect of thermal mass can provide an accurate estimate of energy consumption in most cases except for houses #2 and #4 in mild weather areas. This result shows that there is an effect of mass on the thermal performance of heavily constructed house in mild weather conditions. The simple dynamic model is applicable for high cycling rates and accurate values of inside wall temperature and ambient air temperature.

• Journal of Biosystems Engineering
• /
• v.28 no.6
• /
• pp.497-504
• /
• 2003

The objectives of this study were to develop a harvesting gripper for perilla leaves and test its performance, which was a partial work of the automated perilla leaves harvesting system development. The results of this study could be summarized as the followings: The shear forces for harvesting the perilla were measured. The measured results showed that the average shear force required was 12.13N for cutting the petioles attached to the perilla stalks, and the maximum of 17.42N. The inner diameter of air cylinder used was 6mm and the air pressure was maintained as 0.7㎫ during the tests. The time required for cutting perilla leaves could be adjusted by the control program and cutting operation could be done within 1- 10 seconds. The performance tests were conducted to harvest the perilla leaves by the gripper developed. The average success rates of cutting were 72.2％ for the first test, 78.5％ for the second, and 74.2％ for the last. The perilla leaves were not damaged by the gripper The whole system operation could be finished within three seconds except the delay time for dropping harvested leaves.

• Advances in concrete construction
• /
• v.11 no.3
• /
• pp.231-238
• /
• 2021

The present work aims at investigating the effects of using various fine mineral additions as partial replacement to Portland cement on the tribological properties of concrete. To achieve this goal, concrete mixtures were prepared with different percentages (10, 20 and 30%) of limestone fillers (LF) and natural pozzolana (NP), and (20, 40 and 60%) of blast furnace slag (BFS). The interface yield stress (τ0) and viscous constants (η) that allow characterizing friction at the concrete-pipe wall interface were determined using a rotational tribometer. In addition, the compositions of the boundary layers that formed in the pumping pipes of the different concretes under study were also identified and analyzed. The experimental results obtained showed that the concretes studied have a linear tribological behavior that can be described by the Bingham model. Furthermore, the use of different mineral additions, especially limestone fillers and blast furnace slags, even at high rates, had a beneficial effect on the optimization of the volume of paste present in the boundary layer, which made it possible to significantly reduce the viscous constant of concrete. However, a maximum rate of 10% of natural pozzolana was recommended to achieve tribological properties that are favorable to the pumpability of concrete.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.3
• /
• pp.1649-1654
• /
• 2013

Objective: This work aimed to evaluate the safety and clinical efficacy of transcatheter arterial chemoembolization (TACE) combined with c-arm cone-beam CT guided synchronous radiofrequency ablation (RFA) in treatment of large hepatocellular carcinoma (HCC). Methods: 21 patients with large HCC were studied from January 2010 to March 2012. TACE combined with synchronous C-arm cone-beam CT guided RFA were performed on a total of 25 lesions. Conventional imaging examination (CEUS, enhanced CT or MRI) and AFP detection were regularly conducted to evaluate the technical success rate of combined treatment, complications, treatment response, time without disease recurrence and survival rate. Results: The technical success rate of combined treatment was 100%, without any significant complication. After 1 month, there were 19 cases with complete response and 2 cases with partial response, with an complete response rate of 90.4% (19/21) and a clinical effective rate of 100% (21/21). The complete response rates of single nodular lesions (100%, 17/17) was significantly higher than that of multiple nodular lesions (50%, 2/4) (P<0. 05). During 2 to 28 months of follow-up, in 19 cases with complete response, the average time without disease recurrence was $10.8{\pm}6$ months. The total survival rates of 6, 12 and 18 months in 21 patients were 100%, respectively. Conclusion: TACE combined with synchronous C-arm CT guided RFA is safe and effective for treatment of large HCC. The treatment efficacy for single nodular lesion is better than that for multiple nodular lesions.

• International Journal of High-Rise Buildings
• /
• v.2 no.1
• /
• pp.49-62
• /
• 2013

Many previous tall building fires demonstrate that despite code compliant construction fires often spread vertically and burn over multiple floors at the same time. The collapses of the WTC complex buildings in 9/11 as well as other partial collapses like the ones of the Windsor Tower in Madrid and of the Technical University of Delft building posed new questions on the stability of tall buildings in fire. These accidents have shown that local or global collapse is possible in multi-floor fires. In most of the previous work involving multi-floor fires all floors were assumed to be heated simultaneously although in reality fires travel from one floor to another. This paper extends previous research by focusing on the collapse mechanisms of tall buildings in fire and performs a parametric study using various travelling rates. The results of the study demonstrate that vertically travelling fires have beneficial impact in terms of the global structural response of tall buildings in comparison to simultaneous fires. Contrary to the beneficial effect of the travelling fires in terms of the global structural response, it was noticed that higher tensile forces were also present in the floors compared to simultaneous multi-floor case. Designers are therefore advised to consider simultaneous multi-floor fire as an upper bound scenario. However, a scenario where a travelling fire is used is also suggested to be examined, as the tensile capacity of connections may be underestimated.