• Journal of Biosystems Engineering
• /
• v.28 no.2
• /
• pp.89-96
• /
• 2003

This study was aimed to identify how the main body vibration of power tiller will be transmitted to the trailer, and to find out the basic information for demage reducing method of agricultural products during transportation. The vertical vibration acceleration level was measured at 6 positions, i.e. engine, hitch, seal and three parts of trailer (front middle, and rear) for the not driving but at the engine speeds of 1,000rpm and driving at 0.35m/s. The results of this research could be summarized as follows; 1. For not driving, the accumulated acceleration level up to 120Hz was 50% of total accelerations at engine part and those were 28~41% at other parts. Those up to 40Hz were 20~30% at engine and hitch part and 2~8% at trailer part. And those up to 20Hz were 13~20% at engine and hitch part and 1~4% at trailer part 2. For the driving with 0.35m/s at paved road, the average vertical accelerations were in the range of 0.005~0.058m/s$^2$. The lowest value of 0.005m/s$^2$ was showed at engine part and the value of 0.031-0.058m/s$^2$ was showed at trailer part. 3. For the driving with 0.35m/s, the accumulated value of average vertical accelerations showed the lowest value at engine parts md showed 5 times value of engine part at trailer part especially highest value at middle part of trailer. 4. For the driving with 0.35m/s, the accumulated acceleration level up to 120Hz was 75% of total accelerations at engine part and those were 20~42% at other parts. Ant those up to 20Hz and 40Hz were 24~26% at engine part and 0.1~0.6% at trailer part.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.173-178
• /
• 2002

Traditionally, for space program whose operation environment is severe, high reliability parts, that is class s microcircuit, JANS level semiconductor, and ER passive parts, are reliable choices. But in some case, we must use 'Non-standard Part' which is not verified as high reliability standard part. To use 'Non-standard Part' in space application, the manufacturer should qualify the part and screen potential week part from the flight lot. In this technical memo, I introduce the flight part verification process for KOMPSAT 1 and KOMPSAT 2 program.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.499-502
• /
• 1996

In this paper, we propose a fuzzy iterative learning controller(FILC). It can control fully unknown dynamic plants through iterative learning. To design learning controllers based on the steepest descent method, it is one of the difficult problems to identify the change of plant output with respect to the change of control input(.part.e/.part.u). To solve this problem, we propose a method as follows: first, calculate .part.e/.part.u using a similarity measure and information in consecutive time steps, then adjust the fuzzy logic controller(FLC) using the sign of .part.e/.part..u. As learning process is iterated, the value of .part.e/.part.u is reinforced. Proposed FILC has the simple architecture compared with previous other controllers. Computer simulations for an inverted pendulum system were conducted to verify the performance of the proposed FILC.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.143-146
• /
• 1996

In this paper, we propose a hopfield model for solving the part-matching which is the number of parts and positions are changed. The goal of this paper is to minimize part-connection in pairs and net total path of part-connection. Therefore, this kind of problem is referred to as a combinatorial optimization problem. First of all, we review the theoretical basis for hopfield model to optimization and present two method of part-matching; Traveling Salesman Problem (TSP) and Weighted Matching Problem (WMP). Finally, we show demonstration through computer simulation and analyzes the stability and feasibility of the generated solutions for the proposed connection methods.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.1
• /
• pp.87-98
• /
• 2022

The purpose of this study is to develop the Korean version of Music-Related Quality of Life (K-MRQoL) for the elderly. The K-MRQoL consisted of Musical Ability, Attitude, Activity Frequency (PART 1) and Musical Ability, Attitude, Activity Important (PART 2). Each subcategory consists of Music Perception with 11 items and Music Engagement with 7 items. The validity and reliability of K-MRQoL were measured with Pearson's and Cronbach's alpha correlation coefficients and Independent t-test in total 30 elderly with normal hearing and 30 elderly with hearing loss from local welfare Centers and nursing homes. The correlation coefficients between total scores and PART 1 and PART 2 ranged from .701 to .948 and from .598 to .926, respectively. The internal consistency between total and Part 1 and Part 2 ranged from .846 to .931 and from .838 to .918, respectively. The test-retest correlations were .979, .970, and 979 for total, PART 1, and PART 2, respectively. The correlation between K-MRQoL and Quality of Communication Life Scale was .449. There were significant differences in total, PART 1, and PART 2 between the elderly with normal hearing and hearing loss. This indicates that the K-MRQoL can be used as a useful clinical tool to evaluate Music-related Quality of Life in the elderly with normal hearing or hearing loss.

• Proceeding of KASS Symposium
• /
• 2005.05a
• /
• pp.215-226
• /
• 2005

To study the influence of an lower part on the seismic response of a spatial structure as the upper part of a structure, as a first step, authors subsititude the upper part and the lower part of a structure to single degree of freedom systems indivisually, and set up structural models connected by them. It is clarified that the mass ratio and the period ratio of an upper part to a lower part are important parameteres to find the amplification or reduction of the sesimic response of an upper part by considering of a lower part.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04a
• /
• pp.552-558
• /
• 1995

Stereolithography is a process used to rapidly produce polymer components directly from a computer-representation of the part. There are several considerations to be made for the efficient use of te process. Especially, the build-up orientation of part critically affect to the part accuracy, total build time and the volume of support structures. Te purpose of this study is to determine the optimal build-up part orientation for the SLA process with improving part accuracy, minimizing total build time, and the volume of supprot structures. The first factor is related to the area of surfaces which have staircase protrusions after solidification, the second factor is related to the total number of layers, and the third factor is related to the area of the surfaces which need to be supported with support structures. An algorithm is developed to calculate the staircase area with quantifying the process planning errors that the volume of materials is supposed to be removed or added to the part, and the optimal layer thickness for the SLA system whichcan hadle the variable layer thickness in different orientations achieved by rotating the given part to the specified finite directions. So the optimal part orientation is determined based on the user's selections of primary criterion and the optimal thickness of layers is calculated at any part orientations.

• Journal of Aerospace System Engineering
• /
• v.7 no.2
• /
• pp.42-46
• /
• 2013

In 2010, Airworthiness standard for VLA(Very Light Airplane) category was newly introduced as KAS Part VLA. KAS Part VLA is an adaption of EASA CS-VLA which was developed to reduce unnecessary burden of manufacturer of very light, simple, single-reciprocating-engine/propeller powered airplanes having low stall speeds by tailoring some requirements of Part 23. In this paper, difference and similarity of structural requirements between Part 23 and VLA was analyzed.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.4
• /
• pp.163-173
• /
• 1996

Stereolithography is a process used to rapidly produce polymer components directly form a computer representation of the part. There are several considerations to be made for the efficient use of the process. Especially, the build-up orientation of part critically affects the part accuracy, total build time and the volume of support structures. The purpose of tis study is to determine the optimal build-up part orientation for the SLA process with improving part accuracy, and minimizing total build time and the volume of support structures. The forst factor is related to the area of surfaces whioch have staircase protrusions after solidification, the second factor is related to the total number of layers, and the third factor is related to the area of the surfaces which need to be supported with support structures. An algorithm is developed to calculate the staircase area, quantifying the process errors by the volume of materials supposed to be removed or added to the part, and the optimal layer thickness for the SLA system which can handle the variable layer thickness. So the optima l part orientation is determined based on the user's selections of primary criter- ion and the optimal thickness of layers is calculated at any part orientations.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.28 no.3
• /
• pp.40-53
• /
• 2015

Objectives The purpose of this study is to report the gynecologic use of Angelicae Gigantis Radix in uterus and gynecology part of Dongeuibogam. Methods I searched prescriptions containing Angelicae Gigantis Radix in uterus and gynecology part of Dongeuibogam and analyzed the selected prescriptions to research the use of Angelicae Gigantis Radix in uterus and gynecology part of Dongeuibogam. Results Prescriptions containing Angelicae Gigantis Radix are utilized for 10 disease patterns in uterus part. The number of prescriptions containing Angelicae Gigantis Radix is 50 in uterus part. Prescriptions containing Angelicae Gigantis Radix are utilized for 29 disease patterns in gynecology part. The number of Prescriptions containing Angelicae Gigantis Radix is 90 in gynecology part. Angelicae Gigantis Radix was taken as a sovereign, minister drug of prescriptions containing Angelicae Gigantis Radix of uterus and gynecology part. In many prescriptions, Angelicae Gigantis Radix is used in the treatment of amenorrhea and dysmenorrhea in uterus part. Prescriptions containing Angelicae Gigantis Radix are used to treat not only female infertility but also male infertility in gynecology part. The Samul-tang is the most useful prescription which contains Angelicae Gigantis Radix. Conclusions Angelicae Gigantis Radix is an effectual medicinal herb for menstrual disease, vaginal discharge, pregnancy disease, postpartum disease. So I consider that it is necessary to study methods which improve convenience and effect of prescriptions containing Angelicae Gigantis Radix.