• 한국조경학회지
• /
• 제27권4호
• /
• pp.131-136
• /
• 1999

Aerial videography techniques have been used to inventory conditions associated with grassland, forests, and agricultural crop production. Most recently, aerial videography has been used to verity satellite image classifications as part of the natural ecosystem survey. The objectives of this study were: (1) to use aerial video images of the study area, one part of Taean Seashore National Park, for the accuracy assessment, and (2) to determine the suitability of aerial videography as an accuracy assessment, of the land cover classification with Landsat-TM data. Video images were collected twice, summer and winter seasons, and divided into two kinds of images, wide angle and narrow angle images. Accuracy assessment methods include the calculation of the error matrix, the overall accuracy and kappa coefficient of agreement. This study indicates that aerial videography is an effective tool for accuracy assessment of the satellite image classifications of which features are relatively large and continuous. And it would be possible to overcome the limits of the present natural ecosystem survey method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.129-134
• /
• 2009

The dimension of forged part is different from that of die. Therefore, a more precise die dimension is necessarys to produce the precise part, considering the dimensional changes from forging die to final part. In this paper, both experimental and FEM analysis are performed to investigate the effect of several features including die dimension at each forging step and heat-treatment on final part accuracy in the closed-die upsetting. The dimension of forged part is checked at each stage as machined die, cold forged, and post-heat-treatment steps. The elastic characteristics and thermal influences on forging stage are analyzed numerically by the DEFORM-$2D^{TM}$. The effect of residual stress after heat-treatment on forged part could be considered successfully by using DEFOAM-$HT^{TM}$.

• 소성∙가공
• /
• 제25권4호
• /
• pp.268-274
• /
• 2016

In the automotive seat industry, the use of a fine blanking press is important for manufacturing of high precision products. Among them, a gear part which is a main component of an automotive seat recliner is generally manufactured by fine blanking press. However, the use of conventional mechanical press has been increasing in manufacture of gear part because of low productivity of fine blanking press. In this study, new forming process is suggested to fabricate the gear part with high precision by using mechanical press. The effect of flow restriction die (FRD) which has the restriction of blank edge on dimensional accuracy is investigated by FE-analysis. FE-analysis results for different conditions of FRD indicated that FRD has high dimensional accuracy with the lowest roll-over and the highest perpendicularity of gear part. After application to fabrication of the gear part using mechanical press, the measured dimensional characteristic was compared with the required specification of final product. In addition, results of the performance test showed that the product fabricated by developed process satisfied the required strength and durability. The results show that the suggested forming process by using FRD and mechanical press can replace fine blanking on the viewpoint of dimensional accuracy and productivity.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.81-86
• /
• 1999

The STL file format is an approximation of 3-D model with triangular facets. STL is a standard input file format of Rapid Prototyping(RP) equipment. In computer graphics, a circle has been approximated with an inscribed polygon, which causes an error between the real and approximated circles. In this study, an intersecting polygon has been used to approximate the circle and applied to produce more accurate RP part. The newly proposed method shows it's excellence in part accuracy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.552-558
• /
• 1995

Stereolithography is a process used to rapidly produce polymer components directly from a computer-representation of the part. There are several considerations to be made for the efficient use of te process. Especially, the build-up orientation of part critically affect to the part accuracy, total build time and the volume of support structures. Te purpose of this study is to determine the optimal build-up part orientation for the SLA process with improving part accuracy, minimizing total build time, and the volume of supprot structures. The first factor is related to the area of surfaces which have staircase protrusions after solidification, the second factor is related to the total number of layers, and the third factor is related to the area of the surfaces which need to be supported with support structures. An algorithm is developed to calculate the staircase area with quantifying the process planning errors that the volume of materials is supposed to be removed or added to the part, and the optimal layer thickness for the SLA system whichcan hadle the variable layer thickness in different orientations achieved by rotating the given part to the specified finite directions. So the optimal part orientation is determined based on the user's selections of primary criterion and the optimal thickness of layers is calculated at any part orientations.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.338-341
• /
• 2004

The dimension of forged part is different with the die dimension by the various effects, such as, elastic deformation and thermal effect. And, the difference amounts are not same according to the forging conditions, for example, forging mode, flow stress, etc. Therefore, the use of FEA is effective to predict and update the required die dimension. However, the variables for FE simulation are also as many as variables in the experiment. The variables give very much effect to the accuracy of FE results. At first, the material model is very deeply affected to the estimated dimension of forged part. And the considering of loading and ejecting stages is also important to increase the dimensional accuracy. The experiment and FEA are performed to investigate the dimensional changes and accuracy in cold forging. Two types of upsetting are used to survey the effects of forging mode and stages.

• 한국의학물리학회지:의학물리
• /
• 제21권1호
• /
• pp.99-112
• /
• 2010

국내에서 방사선치료를 위한 선형가속기 품질관리 프로토콜은 많이 개발되어 왔지만 선형가속기를 기반으로 하는 방사선수술장비의 품질관리 프로토콜 개발은 현재까지 거의 이루어져 있지 않고 있다. 이에 본 연구는 선형가속기 기반 일체형 방사선수술장비인 노발리스의 정확도 및 정밀도를 유지하기 위하여 일간, 주간, 월간, 연간에 주기적으로 시행하여야 하는 노발리스 품질관리 프로토콜을 개발 하고 품질관리 상태의 종합적 확인을 할 수 있는 해부학적 팬텀을 제작하였다. 이를 위하여 국내외의 선형가속기를 이용하는 방사선수술 품질관리 프로토콜의 수집 및 분석을 통해 필수적인 품질관리항목과 각 항목의 허용치를 정하였다. 노발리스 품질관리 항목은 기계적 정확도 부분과 방사선 전달 부분의 2가지로 분리하고 기계적 정확도 부분은 방사선발생 장치부, 보조장치부, 그리고 미세다엽 시준기부의 3가지 부분으로 방사선 전달부분은 치료 중심점 평가와 선량학적 평가의 2가지 부분으로 나누어 작성하였다. 최종적으로 노발리스 품질관리 유지를 위하여 시행하여야 하는 일간, 주간, 월간, 연간의 노발리스 품질관리 항목 표를 완성하였다. 완성된 노발리스 품질관리항목 표는 노발리스가 방사선수술에 적합한 정확도 및 정밀도를 유지하는데 필요한 지표로서 기여 할 수 있을 것이라 생각된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.5-8
• /
• 2003

This paper presents a methodology to be able to select an appropriate RP system that suits the end use of a part. Evaluation factors used in process selection include major attributes such as accuracy, roughness, strength, elongation, part cost and build time that greatly affect the performance of RP systems. Crisp values such as accuracy and surface roughness are obtained with a new test part developed. The test part is designed with conjoint analysis to reflect users' preference. The part cost and build time that have approximate ranges due to cost and many variable parameters are presented by linguistic values that can be described with triangular fuzzy numbers. Based on the evaluation values obtained, an appropriate RP process for a specific part application is selected by using the modified TOPSIS(Technique of Order Preference by Similarity to Ideal Solution) method. It uses crisp data as well as linguistic variables, and each weight on the alternatives is assigned by using pair-wise comparison matrix. The ranking order helps the decision making of the selection of RP systems.

• 소성∙가공
• /
• 제26권2호
• /
• pp.101-107
• /
• 2017

Aluminum alloys are widely used in automotive industry because of their high strength-to-density ratio and excellent corrosion resistance. However, conventional cold stamping of aluminum alloys leads to low formability and excessive spring-back. To overcome these problems, Hot Forming Quenching (HFQ) is applied to manufacture automotive part using aluminum alloy. The purpose of this study is to investigate effect of forming temperature on spring-back in HFQ of T6 heat treated AA6061 sheet. In this study, hat shape forming test was adopted to evaluate spring-back characteristics according to various forming temperatures. In additions, the test was also performed with warm forming conditions in comparison with dimensional accuracy of HFQed part. The experimental results showed that dimensional accuracy of HFQed part was superior to warm formed part and amount of spring-back was decreased as forming temperature rise.

• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3068-3078
• /
• 1996

stereolithography is a process used to rapidly produce polymer components directly from a computer representation of the part. There are several considerations to be made for the efficient use of the process. Especially, the necessity of support structures, which prevent the part from warping, sagging, or parachuting and toppling as the elevator moves up and down in the resin, is one concern. After solidification, the support structures must by removed in the end. Bacause this post-treatment process is often performed manually, the more the support structures, the more it increases the finishing operations. Especially for a complicated part, the removal operations may be difficult, take so much time, and even reduce the accuracy of the product. Thus it is important to efficiently generate the efficient support structure for each part geometry. This paper proposes a procedure to automatically generate the supprot structures focused on accuracy, efficiency, convenience, and generation speed.