• 제목/요약/키워드: Part Feeder

검색결과 55건 처리시간 0.035초

Leadframe Feeder Heat Rail의 설계와 검증 (Leadframe Feeder Heat Rail Design and Verification)

  • 김원종;황은하
    • 한국산업융합학회 논문집
    • /
    • 제15권1호
    • /
    • pp.37-42
    • /
    • 2012
  • Trends in semiconductor equipment industry are to reduce the cost of producing semiconductor, semiconductor process development, facility development, and the minimum investment in terms of cost and quality. Semiconductor equipments are being considered to review and development is proceeding at the same time. In the first part of the semiconductor assembly process, in which the importance of die bonding process is emerging, a wide leadframe type die bonding machine is demanded for productivity. Die bonding machine was designed through experiments and by trial and error. It costs a lot of time and financial burden. The purpose of this study is to solve these problems by using the CAE tool 3G. By using finite element method, thermal analysis of die bonding machine to the various widths leadframe die bonder machine rail is performed for design.

이선현상을 포함한 고속철도차량의 전도성 잡음 해석 (Analysis on Conductive Noise of High-Speed Train Including Pantograph Detachment)

  • 이성근;조영만;고광철
    • 조명전기설비학회논문지
    • /
    • 제27권12호
    • /
    • pp.87-92
    • /
    • 2013
  • In high-speed train, the EMI is generated by pantograph detachment and switching device of motor-block. Especially, the conductive noise flows through rail as return feeder influences unintended results to sub-station, transformer, etc. These phenomena were investigated by PSIM circuit analysis tool and each part of railway system is modeled by circuit elements and switching devices. Consequently, the distorted wave in return feeder current occurs by the high speed switching frequency, and the overvoltage is applied by the pantograph detachment. Also the distortion of return current is high in starting point and it decreases from the proximity of a starting point ro the end of terminal.

FDTD법을 이용한 유도성벽을 가지는 $\pi$분기 급전도파관의 설계에 관한 연구 (A study on design for the $\pi$-junction of a feeder waveguide with an inductive wall using FDTD method)

  • 민경식;김광욱;고지원;김동철;임학규
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2000년도 춘계종합학술대회
    • /
    • pp.143-146
    • /
    • 2000
  • This paper presents a study on design for the k-junction of a feeder waveguide with an inductive wall using FDTD method. The feed structure consists of a single waveguide plated on the same layer as radiating waveguide and is characterized by the unit divider, railed a $\pi$-Junction. This $\pi$-Junction with an inductive wall splits part of the power into two branch waveguide through one coupling window, and can excite densely arrayed waveguide at equal phase and amplitude. The power dividing characteristics of a $\pi$ -Junction obtained by FDTD method are compared with one of Galerkin's method of moments. The scattering matrices a $\pi$ -junction calculated by FDTD method are realized.

  • PDF

파트 피이더를 포함한 물류처리 시스템의 기술개발에 관한 연구 (A study on the implementation of material handling system with part feeder)

  • 이원식;전흥주;이범희;고명삼
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
    • /
    • pp.417-422
    • /
    • 1990
  • For the robot manipulator in performing precision task, it is indispensable that the robot utilize the various sensors for intelligence. This paper presents the development and implementation of an integrated control system for the control of robotic manipulator, a feeder, a conveyor belt system, force/torque sensor system, and a photo sensor system. Micro controller board was constructed for hierarchical control of the system. To set up the program interactively, a user can make use of the software which includes the full-down menu and a dialog box. The user can make progress the program quickly and easily by a mouse. The related software was written in C and assembly languages.

  • PDF

버스운행관리 및 수송전략에 관한 연구 (A Study on the Bus Operation Management and Transport Strategy)

    • 한국항만학회지
    • /
    • 제13권2호
    • /
    • pp.323-332
    • /
    • 1999
  • The bus should supply an equal service to the whole community as feeder trip. However the existing bus route can not supply an effective feeder service in spite of the changes in the latent demand by the variety of regional structural change. This study aimed to establish the concept which frames the bus operation and management to cope with the latent demand to the bus. This study tackled this evidence by analyzing the transportation problems in terms of the urban growth emphasizing the following issues ; First, the strategy to improve the bus operation Second the land use control appropriate for the public transportation network Third economical range to justify the bus operation Second, the land use control appropriate for the public transportation network Third, economical range to justify the bus operation Fourth, the allowance for the private transportation mode On the latter part, the difference on the bus operation was compared to determine the range within which the bus operation could be justified. This study would provide some implications to improve the management for bus operation and fundamental information to develop the bus operation system.

  • PDF

버스운행관리 및 수송전략에 관한 연구 (A Study on the Bus Operation and the Strategy for Bus Transport Improvement)

  • 배기목
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 1999년도 추계학술대회논문집
    • /
    • pp.123-130
    • /
    • 1999
  • The bus as a feeder trip should supply equality service to the whole community. But in spite of the change of latent demand to the bus by the variety of regional structural change, the existing bus route can not supply effective feeder service. For cope with the latent demand to the bus, this study establish a concept that frame of the bus operation and management. This study tackled to evidence this fact by analyzing the bus transport problems in terms of the urban growth, and following issues were discussed: 1) the strategy for improvement of bus operation, 2) the land use control which is appropriate for the public transport network, 3) the economical range to justify the bus operation, 4) the allowance for the private transport mode. On the second part of this study, the difference on the bus operation was compared to determine the range within which the bus operation can be justified. This would provide the direction to improve the management for bus operation and fundamental information to develop the bus operation system.

배전자동화용 개폐기 시험용 소프트웨어 개발 (Distribution Automation Switch Testing Software Development)

  • 옥기정;김재성
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 A
    • /
    • pp.446-448
    • /
    • 2001
  • We have developed the testing software for KEPCO operators to maintain the small-scale distribution automation system effectively. The testing software is used to monitor the present status, to measure the analog value(voltage, amperage) and to control the switch and FRTU(Feeder Remote Terminal Unit) in order to find out a disabled part of the system. And at the stage of inspection of the switch and FRTU, it can screen the inferior one.

  • PDF

Development and Performance Evaluation of Falling-type Dried-Persimmon Weight Sorting System Utilizing Load Cell

  • Lim, Jongguk;Kim, Giyoung;Mo, Changyeun;Choi, Inchul
    • Journal of Biosystems Engineering
    • /
    • 제40권4호
    • /
    • pp.327-334
    • /
    • 2015
  • Purpose: A falling-type weight sorter equipped with a load cell was developed to sort lightweight dried persimmons. The performance of the sorter was also evaluated. Methods: The electronic weight sorter for dried persimmon comprises a feeder part, a weight-measurement part, an indicator part, a carrier cup, a discharging part, and a driving part. The weight setting and zero-point adjustment are performed digitally for the convenience of users. For the experimental trials, 228 rubber-clay specimens (representative of dried persimmons) in the weight range of 24.73~99.56 g were manufactured for use in experiments to evaluate the performance of the sorter. Results: The average error of the weight measurements from three experimental trials was 1.655%, with a bias of -0.492 g, a root-mean-square error (RMSE) of ${\pm}0.808g$, and a coefficient of determination ($R^2$ ) of 0.997. Conclusions: The load-cell-based electronic dried-persimmon weight sorter developed in this study facilitates effective, precise, and convenient sorting of dried persimmons.

조기이유 자돈용 액상사료 자동급이기 개발 (Development of an Automatic Liquid Feeder for Early Weaned Piglets)

  • 유용희;정일병;안정대;이덕수;강희설;최희철;전병수;박홍석
    • 한국축산시설환경학회지
    • /
    • 제7권1호
    • /
    • pp.1-12
    • /
    • 2001
  • 조기이유 자돈용 액상사료 지동 급이기를 개발하기 위하여 물 가열 및 배출부, 가루사료 저장 및 배출부, 혼합부, 약상사료 이송부와 이들의 각 기능을 제어하는 중앙 제어부 및 급이기로 구성 하였다. 이러헥 개발한 조기이유 자돈용 액상사료 자동급이기의 실용성을 검토하기 위해 평균 19일령에 이유한 삼원교잡종(Lw$\times$D)ㅈ돈 18두(남9,여9)를 공시하여 3주 동안 액상으로 급여한 후 3주 동안 가루사료를 무제한 급여하였다. 결과는 아래와 같다. 개발한 액상사료 자동 급이기의 물 가열 및 배출부는 혼합부에 온수를 초당 27$m\ell$, 가루사료 저장 및 배출부는 가루사료를 초당 3.7g 씩 정확하게 중앙제어부의 작동에 따라 이송하였다. 일당증체량은 NRC의 표준 성장률과 비교해 액상사료를 급여한 3주 동안 자돈들이 10%정도 낮은 수준이었으나, 그후 가루사료를 급여한 3주 동안에는 24%, 시험전기간 17% 정도 높은 수준이었다. 사료요구율은 시험개시 후 3주 동안 1.09, 그 후 3주동안 2.14, 시험전기간에는 1.89 이었다. 설사 발생은 액상사료 급여후 3일부터 7일 까지 5일동안 발생하였고, 폐사 자돈은 없었다. 새로이 개발한 액상사료 자동 급이기 시작품의 성능 검정을 위한 예비적 시험으로 19일령에 이유한 자돈에게 적용해 본결과, 액상사료 자동급이기는 어떠한 문제없이 잘 작동되었으며, 자돈들의 액상사료 급여 초기 성장은 부진하였으나 차후 성장 촉진과 사료 이용율이 개선되는 것으로 나타났다. 따라서 본 연구에서 새로이 개발한 액상사료 자동 급이기를 이용한 자돈 사육이 가능할 것으로 사료 된다.

  • PDF

Morphological variables restrict flower choice of Lycaenid butterfly species: implication for pollination and conservation

  • Mukherjee, Subha Shankar;Hossain, Asif
    • Journal of Ecology and Environment
    • /
    • 제45권4호
    • /
    • pp.305-312
    • /
    • 2021
  • Background: Butterflies make an important part for plant-pollinator guild. These are nectar feeder or occasionally pollen feeder and thus proboscis of the butterfly species are considered as one of the most important variable in relation to the collection of food from plants. In butterfly-plant association, nectar source is principally determined by quality of nectar, corolla length, and nectar quantity. For the butterfly, nectar uptake is determined by proboscis length because flowers with long corolla restrict butterfly species containing shorter proboscis. Empirical studies proved that butterfly species with high wing loading visit clustered flowers and species with low wing loading confined their visit to solitary or less nectar rich flowers. The present study tries to investigate the flower preference of butterfly species from Lycaenidae family having very short proboscis, lower body length, lower body weight and wing span than the most species belonging from Nymphalidae, Pieridae, Papilionidae, and Hesperiidae. Results: Butterflies with shorter proboscis cannot access nectar from deeper flower. Although they mainly visit on less deeper flower to sucking nectar, butterflies with high wing loading visits clustered flowers to fulfill their energy requirements. In this study, we demonstrated flower choice of seven butterfly species belonging to Lycanidiae family. The proboscis length maintains a positive relationship with body length and body weight. Body length maintains a positive relationship with body weight and wing span. Wing span indicate a strong positive relationship with body weight. This study proved that these seven butterfly species namely Castalius rosimon (CRN), Taracus nara (TNA), Zizinia otis (ZOT), Zizula hylax (ZHY), Jamides celeno (JCE), Chilades laius (CLA), and Psuedozizeeria maha (PMA) visit frequently in Tridax procumbens (TPR), Ocimum americanum (OAM) and Syndrella nodiflora (SNO). The species do not visit Lantana camara (LCA) and Catharanthus roseus (CRO) plants. Conclusion: The present study proved that butterfly species visits frequently in Tridax procumbens (TPR), Ocimum americanum (OAM) but less frequently in Syndrella nodiflora (SNO). So, that study determined the butterfly species helps in pollination of these herbs that in turn helps the conservation of these butterfly species.