• Journal of Korean Society of Disaster and Security
• /
• v.15 no.4
• /
• pp.11-20
• /
• 2022

The general non-destructive inspection method for anchor bolts in Korea applies visual inspection and hammering inspection, but it is difficult to check corrosion or fatigue cracks of anchor bolts in the part included in the foundation or in the part where the nut and base plate are installed. In reality, objective investigation is difficult because inspection is affected by the surrounding environment and individual differences, so it is necessary to develop non-destructive inspection technology that can quantitatively estimate these defects. Inspection of the anchor bolts of domestic road facilities is carried out by visual inspection, and since the importance of anchor bolts such as bridge bearings and fall prevention facilities is high, the life span of bridges is extended through preventive maintenance by developing non-destructive testing technology along with existing inspection methods. Through the development of this technology, non-destructive testing of anchor bolts is performed and as a technology capable of preemptive/active maintenance of anchor bolts for road facilities, practical use is urgently needed. In this paper, the possibility of detecting defects in anchor bolts such as corrosion and cracks and reliability were experimentally verified by applying the ultrasonic test among non-destructive inspection techniques. When the technology development is completed, it is expected that it will be possible to realize preemptive/active maintenance of anchor bolts by securing source technology for improving inspection reliability.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.3
• /
• pp.1-11
• /
• 2023

After the collapse of the Seongsu Bridge in the 1990s in Korea, attention was focused on the maintenance of facilities. The government has established various policies since the enactment of the Act in 1995 until recently. In general, safety inspections are performed to evaluate the safety grade of facilities, and facilities are maintained and managed by performing repairs and reinforcements for defects. However, since the budget is limited, it is impossible to carry out repair and reinforcement projects for all defects. It is necessary to prioritize repair and reinforcement measures. Then, the priority index (PI) is presented considering the importance of members, the seriousness of defects, and economic feasibility. In this index, the degree of influence can be adjusted within the range of 50 to 100% according to the expert's subjective judgment, and the same weight is set for some specific members. Also, the effect through repair and reinforcement is not taken into account decisively, and most of them have a limit in which priority is determined by economic feasibility. Therefore, in this study, through several case studies, problems with the priority index were reviewed and an equation was presented to improve them.

• Korea Science and Art Forum
• /
• v.24
• /
• pp.321-332
• /
• 2016

As functions of public library has become diversified, proper environment color plan enhancing a supporting environment of user based on a function of public library should be achieved by utilizing space chromatics which is a psychological environmental factor. Therefore, public library's color environment of each space functions should be understood and the foundation of color plan enhancing supporting environment of user should also be established under the premise that public library color environment which supports integrated functions to every local residents by meeting functional roles of library. As functions of public library expands, this study has its purpose to analyze color environment characteristics by mainly focusing on library of Busan region to study color environment supporting function of each space. Through a literature research, function and role of color, environment color have considered, and through a preceding research analysis on public library's present condition analysis and tendency of library color preference, theoretical background on library color environment has deducted. By researching present condition of environment color application at 9 public libraries located at Busan, the environment color characteristics of library has deducted through an image adjective analysis using color system, coloration analysis, IRI(Image Research Institute) color image scale. This study can be provided as a reference data for environment color plan based on spatial function to enhance supporting environment of public library user, and it is expected to utilize in the library facility plan which has been diversified.

• Journal of Industrial Convergence
• /
• v.21 no.7
• /
• pp.19-27
• /
• 2023

As the secondary battery market expands, the process of producing laterite ore using the rotary kiln and electric furnace method is expanding worldwide. As ESG management expands, the management of air pollutants such as nitrogen oxides in exhaust gases is strengthened. The rotary kiln, one of the main facilities of the pyrometallurgy process, is a facility for drying and preliminary reduction of ore, and it generate nitrogen oxides, thus prediction of nitrogen oxide is important. In this study, LSTM for regression prediction and LightGBM for classification prediction were used to predict and then model optimization was performed using AutoML. When applying LSTM, the predicted value after 5 minutes was 0.86, MAE 5.13ppm, and after 40 minutes, the predicted value was 0.38 and MAE 10.84ppm. As a result of applying LightGBM for classification prediction, the test accuracy rose from 0.75 after 5 minutes to 0.61 after 40 minutes, to a level that can be used for actual operation, and as a result of model optimization through AutoML, the accuracy of the prediction after 5 minutes improved from 0.75 to 0.80 and from 0.61 to 0.70. Through this study, nitrogen oxide prediction values can be applied to actual operations to contribute to compliance with air pollutant emission regulations and ESG management.

• 한국체육학회지인문사회과학편
• /
• v.54 no.5
• /
• pp.77-87
• /
• 2015

This study aimed to make the leisure activation policy plan on married immigrant women for social integration of multicultural families as a social problem. For that, this study selected total 25 professional experts who can suggest leisure activation policy plans on married immigrant women with convenience quota sampling, and, they were chiefs and instructors in multicultural family support centers, professors of social welfare and leisure, and married immigrant women who had passed Test of Proficiency in Korean and been doing leisure activities. As the results, there were classified into 6 main category like established policy direction, engage, awareness, and program improvement, operations and facility improvements, administrative support, 13 middle categories, and 37 small categories. Through above process, this study suggested 6 steps of policy plan: 1st, making systematic policy direction on the base of married immigrant women's real demand, 2nd, making administrative·institutional support system for effective policy enhancement, 3rd, improving recognitions on immigrant women's leisure activity from surrounders, 4th, improving programs by efficient management and qualitative diversification, 5th, improving management of concerned facilities, and 6th, attracting participations of married immigrant women through economical support·connection and child care service.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6D
• /
• pp.761-770
• /
• 2009

The energy efficiency and environment-friendly aspect of the railway system would be superior to other on-land ransportation systems. In a preliminary feasibility study stage and selection of optimal railway route, the energy efficiency and problems related to environment are usually considered. For the selection of optimal railway route, geographical features and facility of management are generally considered. Environment effect factors for the selection of environment-friendly railway router are focused and studied in this paper. In this study, various analysis of opinion of specialists (railway, environment, transport, urban planning, survey) and the guideline for construction of environment-friendly railway were accomplished. From these results of various analysis, 7 major categories (topography/geology, flora and fauna, Nature Property, air quality, water quality, noise/vibration, visual impact/cultural assets) were extracted. To select environment friendly railway route, many alternatives should be compared optimal route must be selected by a comprehensive assessment considering these 7 categories. To solve this problem, the selected method was AHP which simplifies the complex problems utilizing hierarchy, quantifying qualitative problems through 1:1 comparison, and extracting objective conclusions by maintaining consistency. As a result, a GUIbased program was developed which provides basic values of weighted parameters of each category defined by specialists, and a quantification of detailed assessment guidelines to ensures consistency.

• Smart Media Journal
• /
• v.12 no.5
• /
• pp.36-45
• /
• 2023

Recently, in digital agriculture, the types and utilization of greenhouses based on IoT are spreading, and greenhouses are being modernized, enlarged, and even factoryized using smart technology. However, a specific standardization plan has not been proposed according to the equipment for data collection in the smart greenhouse and the size or shape of the greenhouse. In other words, there is a lack of standard data for facility equipment, such as the type and number of sensors and equipment according to the size of the greenhouse, the type of greenhouse construction film and materials suitable for crops and carbon neutrality. Therefore, in this study, the suitability of the implementation, installation and quantity of IoT equipment for data collection was tested, and some standard technologies were presented through the implementation of data collection and communication methods. In addition, impact strength, tensile, tear, elongation, light transmittance, and lifespan issues for PE, PVC, and EVA, which account for about 90% of existing greenhouses, were presented, and the shape, size, and environmental problems of greenhouses made of films were presented. presented in the text. In this research paper, a standardized carbon-neutral modular smart greenhouse using nano-material film was implemented as a solution to environmental problems such as greenhouse size, farm crop type, greenhouse lifespan, and film, and its performance with existing greenhouses was analyzed and presented. Through this, we propose a modularized greenhouse that can be expanded or reduced freely without distinction in the size of the greenhouse or the shape of farmhouse crops, and the lifespan is extended and standardized. Finally, the average characteristics of greenhouses using existing PE, PVC, and EVA films and the characteristics of greenhouses using new carbon-neutral nanomaterials are compared and reviewed, and a plan to implement an expandable IoT greenhouse that supports carbon neutrality is proposed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.171-173
• /
• 2022

The 4th industrial revolution technology is developing people's lives more efficiently. GIS provided on the Internet services such as traffic information and time information makes people getting more quickly to destination. National geographic information service(NGIS) and each local government are making basic data to investigate SOC accessibility for analyzing optimal point. To construct the shortest distance, the accessibility from the starting point to the arrival point is analyzed. Applying road network map, the starting point and the ending point, the shortest distance, the optimal accessibility is calculated by using Dijkstra algorithm. The analysis information from multiple starting points to multiple destinations was required more than 3 steps of manual analysis to decide the position for the optimal point, within about 0.1% error. It took more time to process the many-to-many (M×N) calculation, requiring at least 32G memory specification of the computer. If an optimal proximity analysis service is provided at a desired location more versatile, it is possible to efficiently analyze locations that are vulnerable to business start-up and living facilities access, and facility selection for the public.

• Journal of Korean Neuropsychiatric Association
• /
• v.57 no.2
• /
• pp.190-208
• /
• 2018

Objectives To initiate and develop a treatment guideline in multidisciplinary approaches for related professions who are either working and/or living with children and adolescents with neurodevelopmental disorders who show behavioral problems. Methods To collect and reflect opinions from multiple professions who assumedly have different interventions or mediations on behavioral problems, a self-report survey and Focus Group Interview (FGI) were conducted for a group of child and adolescent psychiatrists, behavioral therapists, special education teachers, social welfare workers, and caregivers. Results According to a self-report survey and FGI results from multiple professional groups, aggressive behavior is the mostly common behavioral problem necessitating urgent interventions. However, both mainly used intervention strategies and effective treatment methods were different depending on professional backgrounds, such as pharmacological treatment, parent training, and behavior therapy, even though they shared an importance of improving communication skills. In addition, there was a common understanding of necessity to include parent training in a guideline. Lastly the data suggested lack of proper treatment facilities, qualified behavior therapists, and lack of standardized treatment guideline in the field needed to be improved for a quality of current therapeutic services. Conclusion It is supported that several subjects should be included in the guidelines, such as how to deal with aggressive behavior, parent training, and biological aspects of neurodevelopmental disorders. Also, it is expected that publishing the guideline would be helpful to above multiple professions as it is investigated that there are lack of treatment facility and qualified behavioral therapists compared to need at the moment.

• Journal of Industrial Convergence
• /
• v.21 no.10
• /
• pp.65-80
• /
• 2023

Through inductive content analysis, this study sought to examine the crisis experienced by the institution, the quality of service, and the distrust of the system and institution based on the experience of distrust in the home-visiting care service of bbeneficiary and guardians. FGI was conducted on five managers of institutions that provide home-visiting care services. As a result, the central phenomenon was found: deterioration of service quality, distrust of systems and institutions, and difficulties in opera-ting long-term care institutions. In order to improve the quality of home-visited care services and build trust in care workers and institutions, first, home-based associations or operating corporations should develop new education program plans and manuals to strengthen the capabilities of care workers and social workers. Second, the NHIS's monitoring system and the professional management system of care workers should be established. Third, it is necessary to improve awareness of the role, expertise, and rights of care workers, and fourth, improvement measures are required to reduce the turnover rate of care workers, which is the cause of the deterioration of the quality of long-term care services.