• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.1
• /
• pp.1-10
• /
• 2004

Advance in Internet technology has changed traditional production planning and control methods. In particular, collaborations between participants in supply chains are being increasingly addressed in industry for enhancing chain-wide productivity. A representative paradigm that emphasizes collaboration in production planning and control is CPFR(Collaborative Planning, Forecasting and Replenishment). In this paper, we present a multi-agent system architecture that supports the collaborations specified in CPFR. The multi-agent system architecture consists of event manager, data view agent, business rule agent, and collaboration agent. The collaboration agent systematically controls negotiation between supplier and buyer with the aid of collaboration protocol and blackboard. The multi-agent system has been implemented with EJB(Enterprise Java Beans).

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.34 no.8
• /
• pp.308-316
• /
• 1985

This paper proposes an analytic tool for long-term generation expansion planning based on the maximum principle. Many research works have been performed in the field of generation expansion planning. But few works can be found with the maxinmum principle. A recently published one worked by professor Young Moon Park et al. shows remarkable improvements in modeling and computation. But this modeling allows only thermal units. This paper has extended Professor Park's model so that the optimal pumped-storage operation is taken into account. So the ability for practical application is enhanced. In addition, the analytic supply-shortage cost function is included. The maximum principle is solved by gradient search due to its simplicity. Every iteration is treated as if mathematical programming such that all controls from the initial to the terminal time are manipulated within the same plane. Proposed methodology is tested in a real scale power system and the simulation results are compared with other available package. Capability of proposed method is fully demonstrated. It is expected that the proposed method can be served as a powerful analytic tool for long-term generation expansion planning.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.4
• /
• pp.29-38
• /
• 2003

This paper deals with an automated computer-aided process planning and die design system with which designer can determine operation sequences even after only a little experience in process planning and die design of multi former-bolt products by multi-stage former working. The approach is based on knowledge-based rules, and a process knowledge base consisting of design rules is built. Knowledge fur the system is formulated from plasticity theories, empirical results and the empirical knowledge of field experts. Programs for the system have been written in AutoLISP for AutoCAD with a personal computer. An attempt is made to link programs incorporating a number of expert design rules with the process variables obtained by commercial FEM softwares, DEFORM and ANSYS, to form a useful package. The system is composed of four main modules. The process planning and die design module considers several factors, such as the complexities of preform geometry, punch and die profiles, specifications of available multi former, and the availability of standard parts. It can provide a flexible process based on either the reduction in the number of forming sequences by combining the possible two processes in sequence, or the reduction of deviation of the distribution and the level of the required forming loads by controlling the forming ratios. The system uses 2D geometry recognition and is integrated with the technology of process planning, die design, and CAE analysis. The standardization of die parts for multi former-bolt products requiring a cold forging process is described. The system developed makes it possible to design and manufacture multi former-bolt products more efficiently.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.155-158
• /
• 2008

This paper shows construction management focused on waste management in construction project in planning stage Construction waste is given a great deal of weight on total waste. And it is issued in government policy. But it show the limit of problem.As a result of having referenced idea as describe above, this paper will be studied by this process. First, present condition of development waste, cases is researched in construction projects. Second, problems of development pattern and management system are investigated and checked in project cases. Third, maintenance and management method project are proposed by application of planning Stage.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.695-699
• /
• 2005

Propriety of PERT network for planning and management in large-scale systems was investigated. We also review the example of small and middle size system to compare the appropriateness of PERT analysis method. For comparing the appropriateness of PERT analysis method the calculation time, and the variances were estimated. Eventualy, we proposed the criteria of PERT analysis method for planning and management large-scale systems.

• IE interfaces
• /
• v.14 no.4
• /
• pp.394-402
• /
• 2001

In this study, we deal a spatial scheduling system for the block painting process in the shipbuilding industry. In general, the spatial scheduling for the block painting process is a very complicated task. Because spatial allocation of each block in blasting and painting cells is considered simultaneously. Thus the spatial scheduling for the block painting process is the problem of planning and control of operation, which arises in shipyard. This system is developed for blocks to meet the delivery date given by the shipyard production planning system, to maximize space utilization of blasting and painting cells and to balance workload among working teams. And it has been tested using actual scheduling data from a shipyard and successfully applied in a paint shop in a shipbuilding company.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.6
• /
• pp.417-427
• /
• 2013

Assembly direction is used in order to confirm the generated assembly sequences in an automatic assembly sequence planning system. Moreover, assembly sequence planners can ascertain the feasibility of a sequence during simulation with assembly direction based in a CAD environment. In other words, assembly direction is essential for sequence optimizing and automatic generation. Based on the importance of assembly direction, this paper proposes a method to select the best direction for the generated assembly sequence using disassembly simulation and geometrical common area between assembled parts. Simultaneously, this idea can be applied to verify the generated assembly sequence. In this paper, the automatic selection of assembly direction and sequence correction system is designed and implemented. The developed algorithms and the implemented system are verified based on case study in the CAD environment.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.495-497
• /
• 2000

The KEPCO is developing the load forecasting sysetm using land use simulation method and distribution planning system. Distribution planning needs the data of presents loads, forecasted loads sub-statin, and distribution lines. Using the data, determine the sub-station and feeder lines according to the load forecasting data. This paper presents the method of formulation processfor the long term load forecasting and optimal distribution planning and optimal distribution planning. And describes the case study of long term distribution planning of Kwangju city accord to the newly applied method.

• 대한방사선방어학회:학술대회논문집
• /
• 2011.11a
• /
• pp.204-205
• /
• 2011

• IE interfaces
• /
• v.11 no.2
• /
• pp.1-11
• /
• 1998

In this paper, a case study is introduced on the development on a production planning system for the efficient control of work-in-process material flows. A special attention has been given to the prevention of the shortage of the automobile-components at the auto-assembly lines and the dynamic adaptation of the production plan to the continuously changing environment. The expertise of the production planner is analyzed and transformed into the logic of the software developed.