• 한국시뮬레이션학회논문지
• /
• 제23권3호
• /
• pp.33-40
• /
• 2014

드리프터는 국산화개발에 어려움을 겪고 있는 장비이며, 외국선진사의 제품을 데드카피 하여도 시제품의 성능이 뒤떨어지는 현상이 발생하여 왔다. 본 논문은 천공기의 핵심부품인 드리프터의 해석모델을 활용하여 성능격차를 유발하는 요소를 분석하는 사례를 보여준다. 진행절차는 다음과 같다. 우선, 타격시험을 수행하여 해석모델의 신뢰성을 확보한다. 그리고 해석모델을 활용하여 외국선진사 제품과 시제품의 성능비교그래프를 도출한다. 마지막으로 해석모델의 변수를 분석하여 성능격차를 유발하는 인자에 접근한다. 사용된 소프트웨어는 독일 ITI사에서 개발된 SimulationX이다.

• 한국도로학회논문집
• /
• 제14권6호
• /
• pp.1-11
• /
• 2012

PURPOSES : The purpose of the study was to examine dynamic features of concrete after mixing a little macro fiber with small aspect ratio and long length utilized for bridge, tunnel and shotcrete for tensile performance and crack control in domestic/overseas countries with cement concrete pavement mix. METHODS : Coarse aggregates with small aspect ratio and macro fibers with maximum length of approximately 32 mm are introduced in small quantities in the mix proportions of concrete pavement so as to prevent loss of the workability. Then, this study intends to evaluate the applicability of macro fibers in the mix proportions of concrete pavement by examining the basic construction performance, as well as the change of toughness, the equivalent bending strength and the flexural toughness index caused by compression, bending, tension and the flexural stress-displacement curve. RESULTS : As the results, in each kind of macro fiber, polyvinyl alcohol fiber and steel fiber displayed a good performance. CONCLUSIONS : In 0.2 and 0.3% of fiber contents, it is appeared that polyvinyl alcohol fiber has a large effect on improvement of tensile performance and steel fiber on improvement of deforming performance of bending stress.

• 전기학회논문지
• /
• 제66권4호
• /
• pp.727-732
• /
• 2017

This paper describes the dynamic characteristics depending on installation condition between a pantograph and an OCL (Overhead Contact Line) on a new high speed line in Korea. The current collection performance between the pantograph and the OCL was tested during train operation from Suseo to Jije stations. The current collection performance is evaluated based on the duration of an arc by using an arcing measurement system. The system consists of an optical sensor for measuring the duration of an arc and a camera for monitoring current collection performance. An arcing duration is defined as a percentage of arcing in international standards. This test aims to analyze the locations of repetitive arcing depending on installation conditions of OCLs on a new high speed line in order to use the result as reference data for correct construction and maintenance.

• 한국항공우주학회지
• /
• 제48권11호
• /
• pp.873-880
• /
• 2020

본 논문은 스트랩다운 탐색기 측정치와 INS 정보를 이용하여 시선각속도를 추정하는 유도필터 설계에 대해서 다룬다. 제안하는 유도필터는 탐색기 측정치와 유도탄 자세로부터 획득 가능한 시선각과 표적의 위치와 유도탄과의 상대 위치를 측정치로 하고 있으며, 주기 및 동기가 맞지 않는 두 센서의 출력을 사용하기 위해 비동기 필터를 기반으로 하고 있다. 제안한 방법을 통해 시간지연이 큰 탐색기 측정치를 사용함으로써 생길 수 있는 기생루프에 대한 영향을 줄이고 추정성능을 향상시킬 수 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.242-243
• /
• 2017

Despite its excellent properties, polyurea coating waterproofing material is exposed to sunlight when it is applied to the exterior wall of concrete by exposed waterproofing method such as a roof of a building, resulting in a problem of causing a large deterioration in performance compared to initial properties. The purpose of this study is to investigate the effect of carbon fiber incorporation on the performance of carbon fiber - reinforced polyureas and to study the optimum carbon fiber length and content respectively. Result of the study confirmed that the performance of the carbon fiber was improved by 2% or more, and the carbon fiber length was 30 ㎛ and the mixing ratio was 3%. It is expected that stable durability can be secured when manufacturing fiber-incorporated polyureas.

• 한국정밀공학회지
• /
• 제23권7호
• /
• pp.108-113
• /
• 2006

Recently, Automobile manufactures have developing automotive exhaust system under consideration for improvement in engine performance. It thus develop many exhaust components. For example active muffler, semi-active muffler, electronic muffler etc. In this components consider enhanced back pressure and reduction noise. Especially, In recent years it develop the study of semi-active muffler. Semi-active muffler is simple structure and excel performance. Recently many forms semi-active muffler was developed and adopted to the actual use in consideration of cost and technical side for noise and vibration. This study had main objects about the recently developed the semi-active muffler. It was to show its combustion performance as well as its enhanced back pressure characteristics in design. Therefore if the precise analysis of the combustion pressure according to the back pressure transmission was carried out, it was understood that this study would be utilized in the design of the exhaust system such as the semi-active muffler.

• 전기학회논문지P
• /
• 제67권1호
• /
• pp.52-56
• /
• 2018

Extracorporeal shockwave therapy has been widely spread out showing an excellent efficacy compared to traditional medicinal treatments, interventional procedures or surgeries for diseases of tendons and musculoskeletal system. Major performance tests of extracorporeal shockwave therapy consist of pressure, energy flux, concentration, and effective amount of energy on the focus area of shockwave according to IEC 61846. Shockwave should be irradiated accurately to the lesion area to improve the performance of extracorporeal shockwave therapy, which makes it necessary to add the relevant section, IEC 60601-2-36 (12.1.101. Precision of Target Markers and Target Locations). International standards of extracorporeal shockwave therapy have been prepared based on European and western people. Thus, we need to conduct many studies on Korean patients to improve the quality of extracorporeal shockwave therapy and to develop the medical industry. In addition, the performance evaluation of extracorporeal shockwave therapy which has been prepared according to international standards should be additionally modified and supplemented corresponding to the Korean circumstances.

• 대한조선학회논문집
• /
• 제52권3호
• /
• pp.275-281
• /
• 2015

Mounts for shipboard equipment in naval ships play an important role for vibration and shock suppression. New large-capacity resilient mounts, SDR-D30 and SDR-D45, have been developed. This paper involves performance tests for the mount which have maximum load of 30 kN and 45 kN, respectively. The performance tests have been carried out for several mounts based on military standards, such as MIL-M-19863D(SH), MIL-M-21693C(SH), MIL-M-17508F(SH), and MIL-S-901D(NAVY). The test items consist of deflection at upper rate load test, dynamic stiffness, uniformity, static load-deflection(axial, transverse and longitudinal), drift test, fatigue test, and shock test. From these performance tests, it is confirmed that the two mounts have good performances based on military standards.

• 한국지진공학회논문집
• /
• 제22권1호
• /
• pp.23-32
• /
• 2018

In this study, we conducted a shake table test to verify the seismic performance of the paneling system with steel truss composed of bolt connections. The control group was set to the traditional paneling system with steel truss connected by spot welding method. Test results showed that the bolted connection type paneling system has excellent deformation capacity without cracking or brittle fracture of the steel truss connection parts compared to the welding type paneling system. Furthermore, in the bolted connection type, slight damage occurred at the time of occurrence of the same story drift angle as compared with the existing method, it is considered that it has excellent seismic performance. In compliance with the performance-based design recommended for the current code (ASCE 41-13) on non-structural components, it is judged that in the case of the bolted connection type paneling system, it can be applied to all risk category structures without restriction. However, in the case of traditional paneling system with spot welding method, it is considered that it can be applied limitedly.

• 대한기계학회논문집B
• /
• 제33권2호
• /
• pp.141-148
• /
• 2009

Axial-flow compressor is one of the most important parts of gas turbine units with axial turbine and combustor. Therefore, precise prediction of performance is very important for development of new compressor or modification of existing one. Meanline analysis is a simple, fast and powerful method for performance prediction of axial-flow compressors with different geometries. So, Meanline analysis is frequently used in preliminary design stage and performance analysis for given geometry data. Much correlations for meanline analysis have been developed theoretically and experimentally for estimating various types of losses and flow deviation angle for long time. In present study, meanline analysis program was developed to estimate compressor losses, incidence angles, deviation angles, stall and surge conditions with many correlations. Performance prediction of one stage axial compressors is conducted with this meanline analysis program. The comparison between experimental and numerical results show a good agreement. This meanline analysis program can be used for various types of single stage axial-flow compressors with different geometries, as well as multistage axial-flow compressors.