• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.66-75
• /
• 2002

This paper presents an adaptive back propagation algorithm that its able to enhancement for the learning efficiency with updating the learning parameter and varies the number of hidden layer node by the generated error, adaptively. This algorithm is expected to escaping from the local minimum and make the best environment for the convergence of the back propagation neural network. On the simulation tested this algorithm on three learning pattern. One was exclusive-OR learning and the another was 3-parity problem and 7${\times}$5 dot alphabetic font learning. In result that the probability of becoming trapped in local minimum was reduce. Furthermore, the neural network enhanced to learning efficient about 17.6%~64.7% for the existed back propagation. 

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.9
• /
• pp.110-116
• /
• 2022

As the spread of COVID-19 continues, cleanliness and quarantine are emphasized in daily life. If foreign substances enter through the shoe sole when using public facilities, cleanliness may deteriorate and various infections may occur. To prevent this, shoe sole cleaners that filter out foreign substances have been developed. In this study, a design that satisfies structural safety was presented by selecting a new material and updating the design parameter to reduce the weight of the shoe sole cleaner. To evaluate the structural safety, a finite element analysis under selected design loads was performed. Through design improvement and stress analysis, a model that was approximately 85% lighter than the existing model was developed.

• Smart Structures and Systems
• /
• v.31 no.1
• /
• pp.29-43
• /
• 2023

This study investigates the possibility of damage detection of a real bridge by means of a modal parameter-based finite element (FE) model update. Field moving vehicle experiments were conducted on an actual steel plate girder bridge. In the damage experiment, cracks were applied to the bridge to simulate damage states. A fast Bayesian FFT method was employed to identify and quantify uncertainties of the modal parameters then these modal parameters were used in the Bayesian model update. Material properties and boundary conditions are taken as uncertainties and updated in the model update process. Observations showed that although some differences existed in the results obtained from different model classes, the discrepancy between modal parameters of the FE model and those experimentally obtained was reduced after the model update process, and the updated parameters in the numerical model were indeed affected by the damage. The importance of boundary conditions in the model updating process is also observed. The capability of the MCMC model update method for application to the actual bridge structure is assessed, and the limitation of FE model update in damage detection of bridges using only modal parameters is observed.

• Journal of Korean Society of Forest Science
• /
• v.90 no.2
• /
• pp.176-183
• /
• 2001

Loblolly pine (Pinus taeda L.) is the most economically important timber producing species in the southern United States. Much attention has been given to predicting diameter distributions for the solution of multiple-product yield estimates. The three-parameter Weibull diameter distribution yield prediction systems were developed for loblolly pine plantations. A parameter recovery procedure for the Weibull distribution function based on four percentile equations was applied to develop diameter distribution yield prediction models. Four percentiles (0th, 25th, 50th, 95th) of the cumulative diameter distribution were predicted as a function of quadratic mean diameter. Individual tree height prediction equations were developed for the calculation of yields by diameter class. By using individual tree content prediction equations, expected yield by diameter class can be computed. To reduce rounding-off errors, the Weibull cumulative upper bound limit difference procedure applied in this study shows slightly better results compared with upper and lower bound procedure applied in the past studies. To evaluate this system, the predicted diameter distributions were tested against the observed diameter distributions using the Kolmogorov-Smirnov two sample test at the ${\alpha}$=0.05 level to check if any significant differences existed. Statistically, no significant differences were detected based on the data from 516 evaluation data sets. This diameter distribution yield prediction system will be useful in loblolly pine stand structure modeling, in updating forest inventories, and in evaluating investment opportunities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.218-226
• /
• 2020

An experimental study was conducted on baseline model updating and damage estimation techniques for the health monitoring of offshore wind turbine tripod substructures. First, a procedure for substructure health monitoring was proposed. An initial baseline model for a scaled model of a tripod substructure was established. A baseline model was updated based on the natural frequencies and the mode shapes measured in the healthy state. A training pattern was then generated using the updated baseline model, and the damage was estimated by inputting the modal parameters measured in the damaged state into the trained neural network. The baseline model could be updated reasonably using the effective fixity model. The damage tests were performed, and the damage locations could be estimated reasonably. In addition, the estimated damage severity also increased as the actual damage severity increased. On the other hand, when the damage severity was relatively small, the corresponding damage location was detected, but it was more difficult to identify than the other cases. Further studies on small damage estimation and stiffness reduction quantification will be needed before the presented method can be used effectively for the health monitoring of tripod substructures.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.9 no.4
• /
• pp.11-22
• /
• 1999

Least-mean-square(LMS) adaptive filters have proven to be extremely useful in a number of signal processing tasks. However LMS adaptive filter suffer from a slow rate of convergence for a given steady-state mean square error as compared to the behavior of recursive least squares adaptive filter. In this paper an efficient signal interference control technique is introduced to improve the convergence speed of LMS algorithm with tap weighted vectors updating which were controled by reusing data which was abandoned data in the Adaptive transversal filter in the scheme with data recycling buffers. The computer simulation show that the character of convergence and the value of MSE of proposed algorithm are faster and lower than the existing LMS according to increasing the step-size parameter $\mu$ in the experimentally computed. learning curve. Also we find that convergence speed of proposed algorithm is increased by (B+1) time proportional to B which B is the number of recycled data buffer without complexity of computation. Adaptive transversal filter with proposed data recycling buffer algorithm could efficiently reject ISI of channel and increase speed of convergence in avoidance burden of computational complexity in reality when it was experimented having the same condition of LMS algorithm.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.4
• /
• pp.399-410
• /
• 2012

In this study, vibration tests are performed on cantilevered and clamped-clamped laminated composite rectangular plates using experimental modal analysis technique. The damages are simulated by applying progressive line cracks to the laminated composite plates for damage evaluations due to crack growth. The changes of frequency response functions(FRFs), MAC values, and modal parameters (frequency, mode shape and damping ratio) of the damaged composite plates, which are obtained by the modal testing of impact hammer, are investigated. Each experimental modal parameter of the progressively damaged composite plates is compared with natural frequencies and mode shapes obtained by finite element analysis. It is seen that the damage can be evaluated from the changes in the geometric properties and structural behaviors of the laminated composite plates resulting from the model updating process of the finite element model as a benchmark.

• The KIPS Transactions:PartB
• /
• v.10B no.4
• /
• pp.397-402
• /
• 2003

This paper proposes an efficient fixed-point (FP) algorithm for improving performances of the independent component analysis (ICA) based on neural networks. The proposed algorithm is the FP algorithm based on Newton method for ICA using the adaptive learning parameters. The purpose of this algorithm is to improve the separation speed and performance by using the learning parameters in Newton method, which is based on the first order differential computation of entropy optimization function. The learning rate and the moment are adaptively adjusted according to an updating state of inverse mixing matrix. The proposed algorithm has been applied to the fingerprints and the images generated by random mixing matrix in the 8 fingerprints of 256${\times}$256-pixel and the 10 images of 512$\times$512-pixel, respectively. The simulation results show that the proposed algorithm has the separation speed and performance better than those using the conventional FP algorithm based on Newton method. Especially, the proposed algorithm gives relatively larger improvement degree as the problem size increases.

• Journal of KIISE:Software and Applications
• /
• v.36 no.10
• /
• pp.816-824
• /
• 2009

In the face space, face images due to illumination and pose variations have a nonlinear distribution. Active Appearance Models (AAM) based on the linear model have limits to the nonlinear distribution of face images. In this paper, we assume that a few clusters of face images are given; we build local AAMs according to the clusters of face images, and then select a proper AAM model during the fitting phase. To solve the problem of updating fitting parameters among the models due to the model changing, we propose to build in advance relationships among the clusters in the parameter space from the training images. In addition, we suggest a gradual model changing to reduce improper model selections due to serious fitting failures. In our experiment, we apply the proposed model to Yale Face Database B and compare it with the previous method. The proposed method demonstrated successful fitting results with strongly illuminated face images of deep shadows.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.5
• /
• pp.335-342
• /
• 2016

When dynamics changes occurred in an existing Bayesian Network (BN), the related parameters embedding on the BN have to be updated to new parameters adapting to changed patterns. In this case, these parameters have to be updated with the consideration of the causalities in the BN. This research suggests a framework for updating parameters dynamically using Expectation Maximization (EM) algorithm and Harmony Search (HS) algorithm among several Meta-Heuristics techniques. While EM is an effective algorithm for estimating hidden parameters, it has a limitation that the generated solution converges a local optimum in usual. In order to overcome the limitation, this paper applies HS for tracking the global optimum values of Maximum Likelihood Estimators (MLE) of parameters. The proposed method suggests a learning and propagation framework of BN with dynamic changes for overcoming disadvantages of EM algorithm and converging a global optimum value of MLE of parameters.