• 제목/요약/키워드: Parameter Generation

검색결과 649건 처리시간 0.03초

방위각 고정 기법을 이용한 개선된 Tracking Parameter File 생성 방법 (An Improved Tracking Parameter File Generation Method using Azimuth Fixing Method)

  • 전문진;김응현;임성빈
    • 항공우주기술
    • /
    • 제12권2호
    • /
    • pp.1-6
    • /
    • 2013
  • 저궤도 위성은 지상국과의 접속 중에 X-band 안테나를 이용해 촬영한 영상을 전송한다. X-band 안테나는 교신 시간 동안 TPF (tracking parameter file)에 따라 움직이며 지상국의 안테나를 지속적으로 지향한다. TPF 생성 소프트웨어는 위성의 궤도 및 자세 정보와 촬영 및 다운링크 임무 정보를 이용해 X-band 안테나가 지상국을 지향하도록 하는 Azimuth, Elevation 정보를 생성한다. 위성이 지상국 상공을 지나가는 경우 X-band 안테나 특성 상 방위각 속도가 급격하게 증가하며, 특정 각속도로 회전하는 경우 위성의 지터를 유발할 수 있다. 영상촬영과 다운링크를 동시에 수행하는 실시간 임무의 경우 지터에 의한 영상 열화를 방지하기 위해 Azimuth 각속도를 일정 수준 이하로 낮춰야 한다. 현재 사용하는 방법인 한 점의 가상 지상국을 지향하는 방법으로는 각속도를 낮추는데 한계가 있다. 이 논문에서는 방위각 고정 기법을 이용해 X-band 안테나의 Azimuth 각속도를 낮추는 방법을 제안한다. 시뮬레이션 결과는 제안된 방법을 이용해 방위각 속도가 현저하게 감소함을 나타낸다.

소자 시뮬레이션을 이용한 Circuit Model Parameter 생성에 대한 연구 (The Study of Circuit Model Parameter Generation Using Device Simulation)

  • 이흥주
    • 한국산학기술학회논문지
    • /
    • 제4권3호
    • /
    • pp.177-182
    • /
    • 2003
  • Flash memory는 device 특성상 peripheral circuit을 구성하는 transistor의 종류가 다양하고, 이에 따른 각 transistor의 동작 전압 영역이 넓다. 이에 따라 설계 초기의 전기적 특성 사양 결정을 위해서는, 실리콘상에서 소자의 scale down에 따른 전기적 특성을 선 검증하는 과정이 필수적이었으며, 이로 인해 설계 및 소자 개발의 기간을 단축하기 어려웠다. 본 연구에서는 TCAD tool을 사용하여 실리콘상에서의 제작 공정을 거치지 않고, 효과적으로 model parameter를 생성할 수 있도록 하는 방법을 제안하여 전기적 특성 사양 결정과 설계 단계의 시간 지연을 감소할 수 있도록 한다. 또한 성공적 TCAD tool적용을 위해 필요한 process/device simulator의 calibration methodology와 이를 flash 메모리 소자에 대해 적용 검증한 결과를 분석한다.

  • PDF

초고온가스로 압력용기용 Gr. 91 강의 장시간 크리프 수명 예측 방법 개선 (Improvement of Long-term Creep Life Prediction Method of Gr. 91 steel for VHTR Pressure Vessel)

  • 박재영;김우곤;;김선진;김민환
    • 한국압력기기공학회 논문집
    • /
    • 제10권1호
    • /
    • pp.64-69
    • /
    • 2014
  • Gr. 91 steel is used for the major structural components of Generation-IV reactor systems, such as a very high temperature reactor(VHTR) and sodium-cooled fast reactor(SFR). Since these structures are designed for up to 60 years at elevated temperatures, the prediction of long-term creep life is important for a design application of Gr. 91 steel. In this study, a number of creep rupture data were collected through world-wide literature surveys, and using these data, the long-term creep life was predicted in terms of three methods: the single-C method in Larson-Miller(L-M) parameter, multi-C constant method in the L-M parameter, and a modified method("sinh" equation) in the L-M parameter. The results of the creep-life prediction were compared using the standard deviation of error value, respectively. Modified method proposed by the "sinh" equation revealed better agreement in creep life prediction than the single-C L-M method.

자율주행 이동로봇의 목표 도달 시간을 개선하기 위한 TEB Local Planner 파라미터의 분석에 관한 연구 (A Study on the Analysis of TEB Local Planner Parameters to Improve the Target Reach Time of Autonomous Mobile Robot)

  • 노형석;정의;한정민;전정현;전호남
    • 한국산업융합학회 논문집
    • /
    • 제25권5호
    • /
    • pp.853-859
    • /
    • 2022
  • In this study, we analyzed the instantaneous trajectory generation capability and target arrival rate of a mobile robot by changing the parameter of the TEB (Timed Elastic Band) Local Planner among local planners that affect the instantaneous obstacle avoidance ability of the mobile robot using ROS (Robot Operating System) simulation and real experience. As a result, we can expect a decrease in the target arrival time of the mobile robot through a decrease in the parameter values of the TEB Local Planner's min_obstacle_dist, inflation_dist, and penalty_epsilon. However, if this parameter is reduced too much, the risk of obstacle collision of the moving robot is increases, so it is important to combine the appropriate values to construct the parameter.

지형에 따른 예상풍력발전단지에 관한 고찰 (Validity of Wind Generation in Consideration of Topographical Characteristics of Korea)

  • 문채주;정권성;정의헌;박귀열
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2008년도 추계학술발표대회 논문집
    • /
    • pp.81-84
    • /
    • 2008
  • This paper discussed the validity of wind force power generation in consideration of the topographical characteristics of Korea. In order to estimate the exact generation of wind power plants, we analyzed and compared wind resources in mountain areas and plain areas by introducing not only wind velocity, the most important variable, but also wind distribution and wind standard deviation that can reflect the influence of landform sufficiently. According to the results of this study, generation was higher at wind power plants installed in southwestern coastal areas where wind velocity was low than at those installed in mountain areas in Gangwondo where wind velocity was high. This suggests that the shape parameter of wind distribution is low due to the characteristics of mountain areas. and the standard deviation of wind velocity is large due to the effect of mountain winds, and therefore, actual generation is low in mountain areas although wind velocity is high.

  • PDF

우리나라 지형특성을 고려한 풍력발전 타당성 연구 (Feasibility study of wind power generation considering the topographical characteristics of Korea)

  • 문채주;정의헌;심관식;정권성;장영학
    • 한국태양에너지학회 논문집
    • /
    • 제28권6호
    • /
    • pp.24-32
    • /
    • 2008
  • This paper discussed the Feasibility study of wind power generation considering the topographical characteristics of Korea. In order to estimate the exact generation of wind power plants, we analyzed and compared wind resources in mountain areas and plain areas by introducing not only wind speed, the most important variable, but also wind distribution and wind standard deviation that can reflect the influence of landform sufficiently. According to the results of this study, generation was almost the same at wind power plants installed in southwestern coastal areas where wind speed was low as at those installed in mountain areas in Gangwondo where wind speed was high. This demonstrates that the shape parameter of wind distribution is low due to the characteristics of mountain areas, and the standard deviation of wind speed is large due to the effect of mountain winds, therefore, actual generation compared to southwestern coastal areas is almost similar in mountain areas even though wind speed is high.

Markov모형에 의한 월유출량의 모의발생에 관한 연구 (A Study on the Simulation of Monthly Discharge by Markov Model)

  • 이순혁;홍성표
    • 한국농공학회지
    • /
    • 제31권4호
    • /
    • pp.31-49
    • /
    • 1989
  • It is of the most urgent necessity to get hydrological time series of long duration for the establishment of rational design and operation criterion for the Agricultural hydraulic structures. This study was conducted to select best fitted frequency distribution for the monthly runoff and to simulate long series of generated flows by multi-season first order Markov model with comparison of statistical parameters which are derivated from observed and sy- nthetic flows in the five watersheds along Geum river basin. The results summarized through this study are as follows. 1. Both two parameter gamma and two parameter lognormal distribution were judged to be as good fitted distributions for monthly discharge by Kolmogorov-Smirnov method for goodness of fit test in all watersheds. 2. Statistical parameters were obtained from synthetic flows simulated by two parameter gamma distribution were closer to the results from observed flows than those of two para- meter lognormal distribution in all watersheds. 3. In general, fluctuation for the coefficient of variation based on two parameter gamma distribution was shown as more good agreement with the observed flow than that of two parameter lognormal distribution. Especially, coefficient of variation based on two parameter lognormal distribution was quite closer to that of observed flow during June and August in all years. 4. Monthly synthetic flows based on two parameter gamma distribution are considered to give more reasonably good results than those of two parameter lognormal distribution in the multi-season first order Markov model in all watersheds. 5. Synthetic monthly flows with 100 years for eack watershed were sjmulated by multi- season first order Markov model based on two parameter gamma distribution which is ack- nowledged to fit the actual distribution of monthly discharges of watersheds. Simulated sy- nthetic monthly flows may be considered to be contributed to the long series of discharges as an input data for the development of water resources. 6. It is to be desired that generation technique of synthetic flow in this study would be compared with other simulation techniques for the objective time series.

  • PDF

Zwicker 파라미터를 이용한 수차발전기 소음의 음질분석 (Sound Quality Analysis of Water Turbing Generator Noise using Zwicker Parameter)

  • 국정훈;윤재현;김재수
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 추계학술대회논문집
    • /
    • pp.273-277
    • /
    • 2007
  • In case of the Hydraulic Turbine Dynamo operating for Waterpower Generation, it makes very huge and loud noises, and it influences bad effect physically as same as mentally to those people who are working inside of power plant, and brings the decline of an effective working efficiency. However, its evaluation method or measure about such noise reflects merely its physical attribute which is sensuous Loudness of the Noise itself, since the accumulation effect of Noise or the meaning connected with psychological response did not reflect, it is the actual state that a rational evaluation is unable to expect. Consequently, this Study has attempted to evaluate the Noise of Hydraulic Turbine Dynamo by analyzing the sound quality using Zwicker‘s Psychological Acoustic Parameter, after classification by its positions of the Noise occurring at Hydraulic Turbine Dynamo.

  • PDF

회귀분석을 이용한 ITO 코팅유리기판의 표면균일도와 운전변수의 상관관계 분석 (Relationship between Working Parameter and Surface Nniformity of ITO coated Glass Substrate using Regression Analysis)

  • 김면희;이상룡;이태영;배준영
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 추계학술대회 논문집
    • /
    • pp.1353-1356
    • /
    • 2004
  • In recent year, OLED(organic light emitted display) is used as the next generation device of FPD. OLED have been replacing the flat panel display device such as LCD, STN-LCD and TFT because this device is more efficient, economic and simple than those FPD devices, and this need not backlight system for visualization. The performance and efficiency of OLED is related with surface defect of ITO coated glass substrate. The typical surface defect of glass substrate is nonuniformity and bad surface roughness. ITO coated glass substrate is destroied for inspection about surface roughness and non-uniformity. Generally detection of the defects in the surface for ITO coated glass substrate is dependent on operator's experience. In this research, relationship between working parameter and surface non-uniformity is studied using regression analysis.

  • PDF

확률적 수요함수를 고려한 공급함수의 전략변수 내쉬균형 연구 (Supply Function Nash Equilibrium Considering Stochastic Demand Function)

  • 이광호
    • 전기학회논문지
    • /
    • 제57권1호
    • /
    • pp.20-24
    • /
    • 2008
  • A bid-based pool(BBP) model is representative of energy market structure in a number of restructured electricity markets. Supply function equilibrium(SFE) models of interaction better match what is explicitly required in the bid formats of typical BBP markets. Many of the results in the SFE literature involve restrictive parametrization of the bid cost functions. In the SFE models, two parameters, intercept and slope, are available for strategic bidding. This paper addresses the realistic competition format that players can choose both parameters arbitrarily. In a fixed demand function, equilibrium conditions for generation company's profit maximization have a degree of freedom, which induces multi-equilibrium. So it is hard to choose a convergent equilibrium. However, consideration of stochastic demand function makes the equilibrium conditions independent each other based on the amount of variance of stochastic demand function. This variance provides the bidding players with incentives to change the slope parameter from an equilibrium for a fixed demand function until the slope parameter equilibrium.