• Geomechanics and Engineering
• /
• 제16권1호
• /
• pp.49-58
• /
• 2018

Open-mode cracks could be commonly observed in layered rocks. A concept model is firstly used to explore the mechanism of the vertical cracks (VCs) in the top layer. Then the crack behaviour of the two-layer model is simulated based on a cohesive zone model (CZM) for layer interfaces and a plastic-damage model for rocks. The model indicates that the tensile stress normal to the VCs changes to compression if the crack spacing to layer thickness ratio is lower than a threshold. The results indicate that there is a threshold for interfacial shear strength that controls the crack patterns of the layered system. If the shear strength is lower than the threshold, the top layer is meshed by the VCs and interfacial cracks (ICs). When the shear strength is higher than the threshold, the top layer is meshed by the VCs and parallel cracks (PCs). If the shear strength is comparative to the threshold, a combining pattern of VCs, PCs and ICs for the top layer can be formed. The evolutions of stress distribution in the crack-bound block indicate that the ICs and PCs can reduce the load transferred for the substrate layer, and thus leads to a crack saturation state.

• Fisheries and Aquatic Sciences
• /
• 제7권3호
• /
• pp.163-170
• /
• 2004

A fishing simulator for towed fishing gear was investigated in order to mimic the fish behavior in capture process and investigate fishing selectivity. A fish behavior model using a psycho-hydraulic wheel activated by stimuli is established to introduce Lorenz chaos equations and a neural network system and to generate the components of realistic fish capture processes. The fish positions within the specified gear geometry are calculated from normalized intensities of the stimuli of the fishing gear components or neighboring fish and then these are related to the sensitivities and the abilities of the fish. This study is applied to four different towed gears i.e. a bottom trawl, a midwater trawl, a two-boat seine, and an anchovy boat seine and for 17 fish species as mainly caught. The Alpha cluster computer system and Fortran MPI (Message-Passing Interface) parallel programming were used for rapid calculation and mass data processing in this chaotic behavior model. The results of the simulation can be represented as animation of fish movements in relation to fishing gear using Open-GL and C graphic programming and catch data as well as selectivity analysis. The results of this simulator mimicked closely the field studies of the same gears and can therefore be used in further study of fishing gear design, predicting selectivity and indoor training systems.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.320-321
• /
• 2006

In this work, impedance Spectroscopic analysis was applied to study the effect of plasma treatment on the surface of indium-tin oxide (ITO) anodes using $CF_4g$ as and to model the equivalent circuit for organic light emitting diodes (OLEDs) with the $CF_4$ plasma treatment of ITO surface at the anodes. This device with ITO/TPD/$Alq_3$/LiF/Al structure can be modeled as a simple combination of a resistor and a capacitor. The $CF_4$ plasma treatment on the surface of ITO shifts the vacuum level of the ITO as a result of which the barrier height for hole injection at the ITO/organic interface is reduced. The Impedance spectroscopy measurement of the devices with the $CF_4$ plasma treatment on the surface of ITO anodes shows change of values in parallel resistance ($R_p$) and parallel capacitance ($C_p$).

• 한국정보처리학회논문지
• /
• 제3권5호
• /
• pp.1229-1239
• /
• 1996

TV 방송의 부가적인 정보 제공이 활발해지면서 그래픽 중첩 프로세서에 대한 요구가 증대되고 있다. 본 논문에서는 한국형 방송 프로그램 시스템 (Korea Broadcast Programming System: KBPS) 표준안을 만족시키는 KBPS 디코더 ASSP(Application Specific Standard Product)를 설계하고 제작하여 기능을 검증 한다. KBPS 디코더 ASSP는 8 비트 마이크 로프로세서 Z80을 내장하며 그래픽 중첩 제어기, KBPS 스케쥴 디코더, 메모리 제어기, 우선 순위 인터럽트 제어기, 미디 제어기, 적외선 리모콘 수신기, 비동기직렬 통신 제어기, 타이머, 버스 제어기, 범용 병렬 입출력 포트 및 직병렬 인터페이스로 구성한다. 설계한 칩은 0.8 미크론 CMOS 게이트 어레이로 제작하였으며, 약 31,500 게이트가 소요되었고, 14.318MHz 에서 정상 동작하였다.

• 전자공학회논문지CI
• /
• 제44권3호
• /
• pp.81-89
• /
• 2007

MPI(message passing interface) 기반 PC 클러스터 상에서 병렬분산 GHT(generalized Hough transform)를 모델화하고 시간 분석하여 고속화 구현하였다. 파이프라인 방송(pipelined broadcast) 통신방식과 누산기 배열(accumulator array) 분할 처리정책을 사용함으로써 통신부담을 최대한 줄였고, 전체 처리 과정에 걸쳐 통신과 계산처리를 시간 중첩시켜 구현함으로써 최대한의 속도제고를 하였다. 100 Mbps Ethernet 스위치를 이용하여 MPI 기반 PC 클러스터를 구현하고 제안한 병렬분산 GHT를 실험하여 선형에 가까운 속도 제고율 (speedup)을 확인하였다.

• 전기학회논문지
• /
• 제64권7호
• /
• pp.1019-1025
• /
• 2015

The performance requirements on the safety-based functionality of railway signal systems have been reinforced and the effort for enhancement of the existing system or development of the new system is being accordingly made. In particular, various technical researches on replacement or improvement of the existing ATS(Automatic Train Stop) signaling system are now in progress for better operational efficiency. In this study, the complementary points for improvement or replacement of the currently used system(i.e., ATS) will be derived in terms of operating efficiency in an integrated operating environment with the newly introduced system(e.g., ATC: Automatic Train Control). This study can contribute to derive the need for improvement of the signaling system by checking the interface problems and comparing between different systems through the analysis of real operation cases in the field. Eventually, this analysis can be applied to prevent and estimate the collision accidents can be caused by the failure of the signaling system in advance. In addition, the results can be used to provide a future direction to secure the reliability in the parallel operation by integration based on different railway signaling systems.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.304-307
• /
• 2015

Carbon nanotubes (CNTs) have been widely accepted and used as the enhancer for polymer nano-composites due to their remarkable mechanical properties. Understandably, the CNT fiber-polymer matrix interface plays a major role in determining the properties of the CNT-polymer nano-composites. Here, using the LCAODFT Lab tool available on the EDISON Nano-Physics site, we performed first-principles density-functional theory calculations to determine the atomic configurations and binding energies of the CNTs in contact with polymers. For the polymer matrixes, we chose poly(acrylonitrile) (PAN), which is one of the most well-known polymer matrixes for the carbon nanofiber nanocomposites. Different chiralities and diameters of pristine CNTs were considered, and several PAN-CNT configurations were prepared based on the atomistic positions and directions of cyano group in PAN. The most favorable configuration of PAN was obtained when the PAN bound parallel to the surface of CNT. Our finding indicates the binding configurations are determined by the direction of the cyano group dominantly rather than the atomistic position of PAN, or the symmetry of CNTs. The result of increasing the length of CNT diameter suggests that PAN is inclinable to align evenly on the surface of relatively large size of CNT with the configuration parallel to the surface. These results obtained in this study will provide the starting point for the design of improved PAN-CNT composites for the next-generation ultra-strong and ultra-light carbon nanofibers.

• Structural Engineering and Mechanics
• /
• 제29권1호
• /
• pp.91-111
• /
• 2008

This paper outlines the development of a computational model in order to analyze the dynamic behaviour of coupled fluid-structure systems such as a) liquid containers, b) a set of parallel or radial plates. In this work a hybrid fluid-solid element is developed, capable of simulating both membrane and bending effects of the plate. The structural mass and stiffness matrices are determined using exact integration of governing equations which are derived using a combination of classical plate theory and a finite element approach. The Bernoulli equation and velocity potential function are used to describe the liquid pressure applied on the solid-fluid element. An impermeability condition assures a permanent contact at the fluid-structure interface. Applications of this model are presented for both parallel and radial plates as well as fluid-filled rectangular reservoir. The effect of physical parameters on the dynamic behaviour of a coupled fluid-structure system is investigated. The results obtained using the presented approach for dynamic characteristics such as natural frequency are in agreement to those calculated using other theories and experiments.

• 정보처리학회논문지A
• /
• 제8A권4호
• /
• pp.439-446
• /
• 2001

현재 대부분의 병렬 알고리즘은 동기 알고리즘으로 올바른 계산을 위해서는 프로세서들의 동기화와 부하균형이 필수적이다. 만일 부하균형이 불가능하거나 이질적 클러스터처럼 각 프로세서의 성능이 다른 경우, 연산은 가장 느린 프로세서의 성능에 의해 결정된다. 비동기 반복법은 이런 문제를 해결하는 하나의 방안으로 각광받고 있으나, 현재까지의 연구는 비교적 구현이 쉬운 공유 메모리 시스템을 사용한 것이었다. 본 논문에서는 분산 메모리 환경에서 초대형 선형 시스템 문제를 풀기 위해, 빠른 프로세서의 유휴 시간을 최대한 줄임으로써 전체적으로 성능을 향상시키는 비동기 병렬 알고리즘을 제안하고 이를 클러스터에 구현하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.436-437
• /
• 2006

In this work, impedance Spectroscopic analysis was applied to study the effect of plasma treatment on the surface of indum-tin oxide (ITO) anodes using $O_2$ gas and to model the equivalent circuit for organic light emitting diodes (OLEDs) with the $O_2$ plasma treatment of ITO surface at the anodes. This device with ITO/TPD/Alq3/LiF/Al structure can be modeled as a simple combination of a resistor and a capacitor. The $O_2$ plasma treatment on the surface of ITO shifts the vacuum level of the ITO as a result of which the barrier height for hole injection at the ITO/organic interface is reduced. The impedance spectroscopy measurement of the devices with the $O_2$ plasma treatment on the surface of ITO anodes shows change of values in parallel resistance ($R_p$) and parallel capacitance ($C_p$).