• 한국태양에너지학회 논문집
• /
• 제29권2호
• /
• pp.8-13
• /
• 2009

In this paper, two configurations of PV array are analyzed and tested under shading condition, where two configurations are series-parallel and total-crass-tied configuration. Each photovoltaic module is emulated by two 5 inch po1y-crystalline cells in series and an array is constructed by connecting 24 of the modules to compare a generated maximum power of the two configurations. Pspice and Sun simulator. PASAN IIIb, are used for simulation and experiment to test the array under various partial shading conditions. Test results show the total-cross-tied configuration generates 7.63% higher maximum power than the series-parallel configuration, and it is well matched to the analysis and simulations of the two configurations.

• Transactions on Electrical and Electronic Materials
• /
• 제5권1호
• /
• pp.19-23
• /
• 2004

A novel method of high speed, accurate circuit simulation in 3-dimensional (3-D) parallel-plate capacitors is investigated. The basic concept of the circuit simulation methods is partial element equivalent circuit model. The three test structures of 3-D parallel-plate capacitors are fabricated by using multi-layer low-temperature co-fired ceramic (LTCC) process and their S-parameters are measured between 50 MHz and 5 GHz. S-parameters are converted to Y-parameters, for comparing measured data with simulated data. The circuit model parameters of the each building block are optimized and extracted using HSPICE circuit simulator. This method is convenient and accurate so that circuit design applications can be easily manipulated.

• 대한원격탐사학회지
• /
• 제31권3호
• /
• pp.267-279
• /
• 2015

자율 주행 자동차 개발에 있어서 라이다 센서의 중요성이 커지고 있다. 센서 선정이나 알고리즘 개발을 위해 고가의 라이다 센서를 차량에 탑재하여 다양한 주행 환경에 대해 시험하기에 어려움이 따른다. 이에 본 연구는 다양한 차량용 라이다 센서에 대한 일반화된 기하모델링을 통해 범용적으로 적용될 수 있는 차량용 라이다 시뮬레이터를 개발하였다. 개발된 시뮬레이터를 활용하여 많이 활용되고 있는 특정 센서에 대하여 데이터 시뮬레이션과 품질 검증을 수행하였다. 또한, 생성된 데이터를 장애물 탐지에 적용함으로써 선정된 센서의 활용 가능성을 평가하였다. 이처럼 개발된 시뮬레이터는 센서의 도입 및 운용에 앞서서 다양한 실험을 가능하게 하고, 하드웨어 구축과 병행하여 알고리즘 개발을 도모할 수 있다.

• 상하수도학회지
• /
• 제16권6호
• /
• pp.670-678
• /
• 2002

Since Korean government imposed a stricter regulation on effluent T-N and T-P concentrations from wastewater treatment plant, a new process has to be developed to meet these rules and this process should remove T-N and T-P, economically, from weak wastewater that is typical for Korea's combined sewer system sewage. In this study, a computer simulator, BioWin from EnviroSim, Inc. was used. Three processes - A2/O, Modified Johannesburg, UCT- had been simulated under same operational conditions and a new process - Parallel BNR Process - had been developed based on these simulation results. The Parallel BNR process consists of two rows of reactors: One row has anaerobic and aerobic reactors in series, and the other row has RAS anoxic1 and RAS anoxic2 reactors in series. In order to ensure anaerobic state in anaerobic tank, a part of influent is fed to RAS anoxic1 tank in second row. This process had been simulated under same conditions of other three processes and the simulation results were compared. The results showed that three existing processes could not perform biological phosphorus removal when the average influent was fed at any operation temperatures. However, the Parallel BNR process was found that biological phosphorus removal could be performed when both design and average influent were fed at any operation temperatures. This process showed the T-N concentration in effluent had a maximum value of 15mg/L when design influent was fed at $13^{\circ}C$ and a minimum value of 14mg/L when average influent was fed at $20^{\circ}C$. Also, T-P concentrations had a maximum value of 1.3mg/L when average influent was fed at $20^{\circ}C$ and a minimum value of 1.1mg/L when design influent was fed at $13^{\circ}C$. Based on these results, we found that this process can remove nitrogen and phosphorus biologically under any operational conditions.

• 한국의학물리학회지:의학물리
• /
• 제7권2호
• /
• pp.3-17
• /
• 1996

방사선 치료분야에서 선량 보상체가 널리 이용되고 있으나, 그 보상효과에 대한 확실한 검증 방법은 알려진 바가 거의 없다. 본 연구에서는 Missing Tissue 뿐 아니라, Internal Tissue Inhomogeneity 까지 고려한 3차원 보상체를 제작하고, Exit Beam Dose Profile의 측정값과 본 연구에서 고안한 방법으로 기대값을 구해 비교함으로써 보상체의 성능을 평가하고자 하였다. 환자정보는 CT Simulator를 사용하여 얻었고, 보상체 정보는 Render Plan 3-D Planning System을 통해 얻었다. Computer Controlled Milling Machine으로 알루미늄 보상체를 제작해서 보상체가 있는 경우와 없는 경우의 선량 프로파일을 측정하여 비교하였다. 측정은 폴리스티렌 팬톰 사이에 필름을 삽입하여 팬톰 내에서의 실제 선량 분포를 구하고, 필름 카셋트를 이용해서 Exit Beam Dose Profile 을 동시에 얻었다. Oblique Beam, Parallel Opposing Beam, Inhomogeneus Human Phantom에 대해 제작된 보상체가 각각 선량보상 효과가 잘 나타남을 볼 수 있었고, 이 연구에서의 성능확인 방법을 통해 보상체의 성능을 확인할 수 있었다.

• 한국전자파학회논문지
• /
• 제14권10호
• /
• pp.1036-1043
• /
• 2003

본 논문은 평행 결합 선로의 집중 소자형 등가회로를 이용한 방향성 결합기 설계 이론을 제안하였다. 이 등가 회로는 단지 자기 인덕턴스와 커패시턴스만을 가지며 이로 인해 정확한 집중 소자형 등가회로를 설계할 수 있는 장점을 제공한다. 본 논문에서 제시한 평행 결합선로의 등가회로와 등가 파라미터 추출식은 평행 결합 선로와 이 등가회로의 우$.$기 모드 특성의 등가관계를 이용하여 유도하였고, 본 논문에서 제시된 평행결합선로의 각 집중소자 등가회로 모델로 3 dB, 10 dB 방향성 결합기를 설계하여 시뮬레이션 결과와 실제 제작하여 측정한 결과를 비교하였다. 또한 LTCC 기술의 적용을 위하여 다층구조을 갖는 칩형태의 2 GHz대 집중소자형 방향성 결합기를 본 논문에서 제시한 등가회로 구조를 사용하여 설계하고, 상용 전자장 시뮬레이터를 사용하여 설계 결과를 검증하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.243-247
• /
• 2005

This paper describes an on-going national R&D program for the development of a gas turbine/fuel cell hybrid power generation system and related R&D activities. The final goal of this program is to develop a 200kW-c1ass gas turbine/fuel cell hybrid power generation system and achieve high efficiency over $60\%$ (AC/LHV). In the first phase of the development, a sub-scaled 60kW-class hybrid system based on the 50kW-class microturbine and the 5kW SOFC will be developed for the purpose of concept proof of the hybrid system. Core components such as the microturbine and the SOFC system are being developed and parallel preparation for system integration is being carried out. Before the core components are assembled in the final system. operating characteristics of a hybrid system are investigated from a simulated system where a turbocharger (microturbine simulator) and a modified fuel cell burner test facility (fuel cell simulator) are employed. The 60kW demonstration unit will be built up and operated to provide the valuable information for the preparation of the final full scale 200kW hybrid system.

• Journal of Power Electronics
• /
• 제11권2호
• /
• pp.202-210
• /
• 2011

Polymer electrolyte membrane (PEM) fuel cell is one of the popular renewable energy sources and widely used in commercial medium power areas from portable electronic devices to electric vehicles. In addition, the increased integration of the PEM fuel cell with power electronics, dynamic loads, and control systems requires accurate electrical models and simulation methods to emulate their electrical behaviors. Advancement in parallel computation techniques, various real-time simulation tools, and smart power hardware have allowed the prototyping of novel apparatus to be investigated in a virtual system under a wide range of realistic conditions repeatedly, safely, and economically. This paper builds up advancements of optimized model constructions for a fuel cell stack system on a real-time simulator in the view points of improving dynamic model accuracy and boosting computation speed. In addition, several considerations for a power hardware-in-the-loop (PHIL) simulation are provided to electrically emulate the PEM fuel cell stack system with power facilities. The effectiveness of the proposed PHIL simulation method developed on Opal RT's RT-Lab Matlab/Simulink based real-time engineering simulator and a programmable power supply is verified using experimental results of the proposed PHIL simulation system with a Ballard Nexa fuel cell stack.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.192-198
• /
• 2013

A light-weight enough to be portable yet functionally complete hand-writing machine was designed with hardware assembled and software implemented. The machine simulating human hand-writing not only allows identical massive scriptings on papers in human's proxy, but also offers emotional appearance as if the script was directly hand-written in ink. The features of human writing were independently put together to complete the action of scripting. The writing style could be altered in order to mimic a person's own specific writing style. The present work demonstrates that the assembled hand-writing machine was able to duplicate writing of scripts in almost parallel lines in consistent manner. The machine can be used in the emotional marketing area where seasonal greetings or thank-you cards are to be sent in massive manner. The pen-holding machine can also find an emotional application such as writing a short greeting note on a plastic lid on a disposable coffee cup in coffee-selling stores.

• 유공압시스템학회논문집
• /
• 제5권4호
• /
• pp.1-9
• /
• 2008

In this paper, an energy regeneration algorithm is proposed to make the maximum use of the regenerative braking energy for a parallel hybrid electric vehicle(HEV) equipped with a continuous variable transmission(CVT). The regenerative algorithm is developed by considering the battery state of charge(SOC), vehicle velocity and motor capacity. The hydraulic module consists of a reducing valve and a power unit to supply the front wheel brake pressure according to the control algorithm. In order to evaluate the performance of the regenerative braking algorithm and the hydraulic module, a hardware-in-the-loop simulation (HILS) is performed. In the HILS system, the brake system consists of four wheel brakes and the hydraulic module. Dynamic characteristics of the HEV are simulated using an HEV simulator. In the HEV simulator, each element of the HEV powertrain such as internal combustion engine, motor, battery and CVT is modelled using MATLAB/$Simulink^{(R)}$. In the HILS, a driver operates the brake pedal with his or her foot while the vehicle speed is displayed on the monitor in real time. It is found from the HILS that the regenerative braking algorithm and the hydraulic module suggested in this paper provide a satisfactory braking performance in tracking the driving schedule and maintaining the battery state of charge.