• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2001.11a
• /
• pp.47-50
• /
• 2001

In order for effective operation of existing power systems, introduction of the so-called FACTS(Flexible AC Transmission System) such as SVC and UPFC etc, is unavoidable. The UPFC(Unified Power Flow Controller) is composed of STATCOM(Static Compensator) and SSSC(Static Synchronous Series Compensator), and is used to control the magnitude and phase angle of injected sources which are connected bothin series and in parallel with the transmission line to control the power flow and bus voltages. This paper presents a UPFC simulation on RTDS. The voltage and phase angle of a system have been analyzed by regulating the firing angle inside the UPFC.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.4
• /
• pp.359-367
• /
• 2012

In this paper, the input split type series-parallel hybrid electric vehicle (SPHEV) is established and the interpretation of the dynamic characteristics in four kinds of HEV modes, such as electric vehicle mode, engine mode, hybrid mode, and regeneration mode, is described. For this research, the forward-facing approach simulation method is chosen, which is useful for vehicle dynamic analysis. The rating of each powertrain component is designed based on energy-based concept and electrical peaking hybrid (ELPH) method. Finally, the designed powertrain is evaluated with the developed PSiM simulator and simulation results are shown.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.2
• /
• pp.73-78
• /
• 2005

The management of technological systems will become increasingly complex. Safe and reliable software operation is a significant requirement for many types of system. So, with software fault tolerance, we want to prevent failures by tolerating faults whose occurrences are known when errors are detected. This paper presents a fault location algorithm for single-phase-to-ground faults on the teed circuit of a parallel transmission line using software fault tolerance technique. To find the fault location of transmission line, we have to solve the 3rd order transmission line equation. A significant improvement in the identification of the fault location was accomplished using the N-Version Programming (NVP) design paradigm. The delivered new algorithm has been tested with the simulation data obtained from the versatile EMTP simulator.

• Journal of electromagnetic engineering and science
• /
• v.7 no.3
• /
• pp.116-121
• /
• 2007

Novel design of a wideband monopole antenna for DVB-H service is presented. The proposed antenna is designed based on a monopole antenna. It consists of folded monopole and parallel parasitic element. The folded segment of the folded monopole makes the antenna shorter. The length of the parasitic element obtains additional resonance frequencies. The gap distance between the folded monopole and the parasitic element is a key parameter to control impedance matching for wideband operation. The antenna has wide band performance, good impedance and radiation characteristics from 470 MHz to 870 MHz. The measured return loss for operating frequencies over DVB-H band is better than 10 dB. Good radiation patterns are also obtained. The measured results are compared with calculated results using Ansoft HFSS(High Frequency Structure Simulator).

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.5
• /
• pp.435-442
• /
• 1997

The roof crane system is used for transporting a variable load to a target position. The goal of crane control system is transporting the load to a goal position as quick as possible without rope oscillation. The crane is generally operated by an expert operator, but recently an automatic control system with high speed and rapid tansportation is required. In this paper, we developed a simple fuzzy controller which has been introduced expert's knowledge base for anti-swing and rapid tranportation to goal position. In particular, we proposed the synthesis reasoning method which synthesizes on the basis of expert knowledge of the angle control input and position control input which are inferenced parallel and simultaneously. And we confirmed that the performance of the developed controller is effective as a result of applying it to crane simulator and also verified whether the proposed synthesis rules have been applied correctly using clustering algorithm from the measured data.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.144-150
• /
• 2000

In this paper, we introduce a modified six-degrees-of-freedom parallel-link manipulator, which will be applied to the human vibration experiments. We analyze the inverse kinematics and workspace of this manipulator and comprehend the characteristics of kinematics analyzed. Additionally, solutions of forward kinematics are obtained through the iterative Newton-Raphson method known as one of the most used numerical analysis. Finally, dynamic equation of the manipulator is derived in closed form through the Newton-Euler approach, which will be used for the development of control software.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.65-68
• /
• 2000

We design a new driving system of 5" true color FED using current controlled PWM method. Further more, we successfully developed a 5" FED panel, which resolution is 320$\times$240(Color). When we design a 5" FED driving circuit, FED tips are modeled as R-C for circuit simulator of FED driving circuit. In Video data processing, parallel R, G, B input signals is processed independently, so duty ratio increase and no noise, high quality performance is achieved in display of 5" FED. The luminance is about 100cd/$m^2$, the anode power consumption Is 2.1W and total power of the driving system is 21.54W

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1098-1099
• /
• 2008

In this paper, we study the electrical characteristics evaluation of PV module caused by mechanical stress. By observing the easy separation between glass and frame of module, we give static force on surface of PV module. Through this experiment, parallel resistance changes by varying loading stress. Also the maximum power reduction ratio is measured using class A solar simulator. The specific analysis is shown in the following paper.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.10
• /
• pp.10-18
• /
• 1992

This paper considers and implementation of the memory system which provides simultaneous access to pq image points of block(p$\times$q), horizontal vector(1$\times$pq)and/vertical vector(pq$\times$1) in 2-dimension image array, where p and q are design parameters. This memory system consists of an address calculation circuit, address routing circuit, data routing circuit, module selection circuit and m memory modules where m>qp. The address calculation circuit computes pq addresses in parallel by using the difference of addresses among image points. Extra module assignment circuit is not used by improving module selection circuit with routhing circuit. By using Verilog-XL logic simulator, we verify the correctness of the memory system and estimate the performance. The implemented system provides simultaneous access to 16 image points and is 6 times faster than conventional memory system.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.3
• /
• pp.163-169
• /
• 1997

The simulation of target-scattered echo with the moving sonar platform and target in 3-dimensional ocean environment is essential to validate and evaluate the performance of a sonar system. This paper presents the improved target signal simulation on the basis of the highlight(HL) model and its realtime algorithm. In order to simulate the scattering highlight, the highlight is represented as a directional scatterer. The realtime generation algorithm of the target signal is realized by use of DSP chip, TMS320C40, where the 40 channels are equally separated to form a parallel processing task in 4 processors. The presented realtime-version of target signal simulation can be used as a target signal simulator in the development of ACM(Acoustic Counter Measure) and advanced sonar signal processing techniques.