• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.486-488
• /
• 2008

300 MHz가 넘는 초고자장 MRI에서는 송신 또는 수신 RF Magnetic Field 의 불균일도가 심해져서 이를 개선하기 위한 많은 방법들이 제안되고 있다. 그 중 가장 대표적인 방법은 $4{\sim}32$ 채널의 Transmit Array의 각 채널에 인가되는 전압과 위상을 변화시켜 RF Magnetic Field의 불균일도를 개선하는 방법이다. 본 논문에서는 Transmit Array 내부에서 머리위치의 변화에 따라 RF Magnetic Field ($B_1$ Field) 의 불균일도가 많이 변화하며 이에 따라 RF 송신용 전압과 위상의 Pattern을 새로 최적화 해야 함을 확인하였다. 또한 RF field Mapping을 하기 위해서 Composite RF Sequence를 사용한 Rapid Sequence의 사용과 채널 전압과 위상을 최적화하기 위해서 일반적인 Iterative 방식보다 간편하고 빠른 Target Method를 제안하였다. Driving 패턴의 최적화는 Complex 행렬식을 사용했으며 RF Magnetic Field ($B_1$ Field) 분포는 FDTD 방식으로 계산하였다.

• Fisheries and Aquatic Sciences
• /
• v.15 no.4
• /
• pp.313-316
• /
• 2012

Two unrecorded species of the snapper, Lutjanus malabaricus (296.0 mm standard length [SL]) and L. stellatus (350.0 mm SL) belonging to the family Lutjanidae, were first collected from the western coastal waters of Jeju Island, Korea. L. malabaricus is characterized by having a dark marking on the upper half of the caudal peduncle, a band of vomerine teeth that does not protrude posteriorly at the middle, and nine anal soft rays. Compared to its Korean relative, L. malabaricus is distinguishable by having rows of scales that run obliquely in the dorsal-posterior direction above the lateral line (vs. parallel to the lateral line in L. argentimaculatus). L. stellatus can be identified by the absence of wavy blue lines on the head (vs. many blue lines in L. rivulatus) and presence of a white spot above the lateral line (vs. a black blotch on the lateral line in L. rivulatus). We propose new Korean names, "Jin-hong-tung-dom" and "Huin-jeom-tung-dom," for L. malabaricus and L. stellatus, respectively.

• Journal of Welding and Joining
• /
• v.34 no.5
• /
• pp.13-18
• /
• 2016

Toshiba has developed a laser peening system for PWRs(pressurized water reactors) as well after the one for BWRs(boiling water reactors), and applied it for BMI(bottom-mounted instrumentation) nozzles, core deluge line nozzles and primary water inlet nozzles of Ikata Unit 1 and 2 of Shikoku Electric Power Company since 2004, which are Japanese operating PWR power plants. Laser pulses were delivered through twin optical fibers and irradiated on two portions in parallel to reduce operation time. For BMI nozzles, we developed a tiny irradiation head for small tubes and we peened the inner surface around J-groove welds after laser ultrasonic testing (LUT) as the remote inspection, and we peened the outer surface and the weld for Ikata Unit 2 supplementary. For core deluge line nozzles and primary water inlet nozzles, we peened the inner surface of the dissimilar metal welding, which is of nickel base alloy, joining a safe end and a low alloy metal nozzle. In this paper, the development and the actual application of the laser peening system for PWR power plants will be described.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.4
• /
• pp.318-325
• /
• 2002

The primary method of diagnosis in craniofacial deformity patient is used by gross inspection. So we studied the frontal photometric measurements for maxillofacial Korean normals 44 male and 48 female ages 19 to 20 years were selected from a group of 92 healthy Kyung Hee university students in Seoul.. The photograph were taken with the subject sitting in head position parallel with interpapillary plane to the floor. During taking pictures, facial anallyser by Obwegeser(Martin Co., Germany) was used for correct measurements. The results of this study was followed. 1. In the linear measurements, all values of males were longer than those of females but middle third height and lower third height, facial width and nasal width of males were longer than those of females in p<0.05 2. The difference between right and left angular and linear measurement was insignificant. 3. In the horizontal facial ratios, interocular distance and nasal width were longer and mouth width were smaller in korean than in american(p<0.05). 4. In the vertical ratios, korean women have shorter facial height of lower third comparing with facial height of middle third than american(p<0.05). 5. In the vertical facial ratios, korean have smaller proportion below the stomion in the lower third department than american. (p<0.05).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.9
• /
• pp.1110-1116
• /
• 2004

Experimental measurements of laser-induced ion mobility(LIIM) were performed for ethene/air premixed flames operated near the soot inception point. Soot was ionized using a pulsed laser operated at 532 nm. The ionization signal was collected with a tungsten electrode located in the post-flame region. ionization signals were collected using both a single electrode and dual electrode configuration. Prior LIIM studies have focused on the use of a single biased electrode to generate the electric field, with the burner head serving as the path to ground. In many practical combustion systems, a path to ground is not readily available. To apply the LIIM diagnostic to these geometries, a dual electrode geometry must be employed. The influence of electrode configuration, flame equivalence ratio, and flame height on ionization signal detection was determined. The efficacy of the LIIM diagnostic to detect soot inception in the post-flame region of a premixed flame using a dual electrode configuration was investigated. For the different dual electrode configurations tested, the dual parallel electrode geometry was observed to be most sensitive to detect the soot inception point in a premixed flame.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.12
• /
• pp.1861-1868
• /
• 2001

Vortical structures in the near-wake region of a cubic obstacle are studied using numerical simulation. We consider flow between two parallel plates with a cube mounted on one of the plates. In the turbulent near-wake region of the flow, coherent structures such as hairpin vortices are found. Quasi-periodic behavior of the hairpin vortices is noticed; its dimensionless frequency at Re=1,000 is about 0.82 which is consistent with the result of Elavarasan of et al.'s experiment [Fluid Dyn. Research, 2000, 27] although their geometry is somewhat different from on. In the case of Re=3,500, the dimensionless frequency of the hairpin vortex is about 1.60. It is observed that the translating speed of the head of the hairpin vortex is lower than the streamwise mean velocity at that location. In the vicinity of the lower plate downstream of the cube, various length scales are identified thus less coherent. However, it is noticed that the vortical structures become gradually elongated downstream of the new reattachment.

• Korean Journal of Food Science and Technology
• /
• v.1 no.1
• /
• pp.45-50
• /
• 1969

On the basis of UV spectral changes and TBA reaction, malonaldehyde (MA) in aqueous solution receives considerable photochemical modification by UV light of short wavelengths around $260m{\mu}$. When aflatoxin is added in the solution, UV light of long wavelengths around $360m{\mu}$ induces such changes quite rapidly and although the rate of change is rather slow, it is also true even with ordinary laboratory illumination(fluorescent). The modification is irreversible in nature and the role of aflatoxin in this reaction is identified as a photosensitizer. The mechanism involved in this modification is apparently due to the parallel dimerization of MA molecules, but not by head to tail combination of the molecules.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1251-1258
• /
• 2008

The purpose of this research is to introduce the new temporary earth retaining wall system using landslide stabilizing piles. This system is a self-supported retaining wall(SSR) without installing supports such as tiebacks, struts and rakers. The SSR is a kind of gravity structures consisting of twin parallel lines of piles driven below dredge level, tied together at head of soldier piles and landslide stabilizing piles by beams. There are three types of excavation wall structures: standard method for medium retained heights(<8.0m), internal excavation method and slope excavation method for deep-excavation applications(>8.0m). In the present study, the measured data from seven different sites which the SSR was used for excavation were collected and analyzed to investigate the characteristic behavior lateral wall movements associated with urban excavations in Korea.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.8 no.1
• /
• pp.73-83
• /
• 2000

The purpose of this study is to analyze and characterize the correlation of the thermal comfort sensation with physiological responses for men in winter indoor environment. A number of experiments were conducted under twenty different environmental conditions with college male students. Clinical information on each participant was reported in terms of electrocardiogram (ECG), electroencephalogram (EEG) and self-centered evaluation. The comfort zone in winter is found, throughout the study, at Standard New Effective Temperature (SET$T^+$) of 25.2$^{\circ}C$, Predicted Mean Vote (PMV) between 0.27 and 0.62, and Thermal Sensation Vote (TSV) in the range of -0.76 and 0.36. The largest difference in skin temperature is measured at the calf area with respect to air temperature changes. Skin sensitivity to environment temperature is explained as calf, head, chest and abdomen in descending order. Change in heat rate is analyzed to be in parallel with that of SET$T^+$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.7
• /
• pp.834-841
• /
• 2004

Experimental study on the three-dimensional topology of hairpin packet structures in turbulent boundary layers were carried out. Two different Reynolds number based on momentum thickness, Re$\sub$$\theta$/=514 and 934 were generated in a blowing type wind tunnel under the condition of zero pressure gradient. Simultaneous measurements of velocity fields at a wall-normal plane and wall-parallel plane by a plane PIV and a Stereo-PIV systems. The two Nd:Yag laser systems and three CCD cameras were synchronized to obtain instantaneous velocity fields at the same time. To avoid optical noise at the crossing line by the two laser light sheets, a new optical arrangement using polarization was applied. The obtained velocity fields show the existence of hairpin packet structure vividly and the idealized hairpin vortex signature is confirmed by experiment. Two counter-rotating vortex pair which reflects the cutting plane of hairpin legs are found both side of a strong streaky structure when the wall-normal plane cuts the hairpin head.