• 대한핵의학회지
• /
• 제19권1호
• /
• pp.73-75
• /
• 1985

Acute transient synovitis of the hip presents clinically pain and limping. But in the majority of the cases, definite positive findings are not manifest in roentgenogram in its early phase. However radionuclide bone imaging combines with the assessment of vascularization and bone tracer uptake is of great value in solving this diagnostic problem. The materials for this study consisted of 29 children with acute transient synovitis of the hip, characterized by symptoms and physical signs of an arthritis, negative X-ray findings and disappearance of all symptoms and signs within a short period of time. They were twenty males and 9 females and age ranged from 1 to 12 years. We took pelvic reontgenogram in AP and frog-leg views. After intravenous bolus injection of 10 to 15 mCi of $^{99m}Tc-methylene$ diphosphonate, 24 sequential image of the pelvis was taken at 2-second interval for blood flow study. The scintigrams were made using a gamma camera with high resolution parallel hole collimator. Blood pool imaging was obtained at 2 minutes after tracer administration. After 3 hours, static images were taken and then closeup image of the hip using pin-hole collimator was followed. The results were as follows: 1) Bone scintigram was much more sensitive than conventional roentgenogram in diagnosis of acute transient synovitis of the hip. 2) Three-phase imagings showed increased vascular activities in blood pool scintigrams in 96%. 3) Pin-hole imaging showed increased tracer uptake in the regional bones of the hip, par ticularly in the medial aspect of femoral head and acetabulum. 4) We confirmed that three-phase imaging reinforced with pin-hole technique were very useful in diagnose of acute transient synovitis of the hip.

• Smart Structures and Systems
• /
• 제26권5호
• /
• pp.657-666
• /
• 2020

A rotational pulse-echo ultrasonic propagation imager that can inspect cylindrical specimens for material nondestructive evaluations is proposed herein. In this system, a laser-generated ultrasonic bulk wave is used for inspection, which enables a clear visualization of subsurface defects with a precise reproduction of the damage shape and size. The ultrasonic waves are generated by a Q-switched laser that impinges on the outer surface of the specimen walls. The generated waves travel through the walls and their echo is detected by a Laser Doppler Vibrometer (LDV) at the same point. To obtain the optimal Signal-to-Noise Ratio (SNR) of the measured signal, the LDV requires the sensed surface to be at a right angle to the laser beam and at a predefined constant standoff distance from the laser head. For flat specimens, these constraints can be easily satisfied by performing a raster scan using a dual-axis linear stage. However, this arrangement cannot be used for cylindrical specimens owing to their curved nature. To inspect the cylindrical specimens, a circular scan technology is newly proposed for pulse-echo laser ultrasound. A rotational stage is coupled with a single-axis linear stage to inspect the desired area of the specimen. This system arrangement ensures that the standoff distance and beam incidence angle are maintained while the cylindrical specimen is being inspected. This enables the inspection of a curved specimen while maintaining the optimal SNR. The measurement result is displayed in parallel with the on-going inspection. The inspection data used in scanning are mapped from rotational coordinates to linear coordinates for visualization and post-processing of results. A graphical user interface software is implemented in C++ using a QT framework and controls all the individual blocks of the system and implements the necessary image processing, scan calculations, data acquisition, signal processing and result visualization.

• 한국치위생학회지
• /
• 제11권5호
• /
• pp.783-790
• /
• 2011

Objectives : The purpose of this study was to examine students' difficulties in the process of oral radiography practice, to raise awareness of the importance and necessity of oral radiography and decipher, and to provide some information on effective ways of oral radiography practice. Methods : The subjects in this study were 285 dental hygiene students at K college, who included 153 sophomores and 132 graduates-to-be from June to November, 2010. Results : 1. The parts of the anatomy structure that they found it most difficult to decipher were maxillary molar(25.3%) and lower molar(22.1%). 2. They made during oral radiography was an improper film positioning(35.1%). 3. The part of bisecting technique was adjusting vertical and horizontal angles(53.0%). 4. The part of paralleling technique was positioning XCP in the oral cavity(44.2%). 5. The part of bite-wing technique was adjusting vertical and horizontal angles(38.2%). 6. The part of occlusion technique was positioning film and tube head(36.5%). 7. The part of panorama technique was finding out program setting(42.5%). Conclusions : The findings of the study indicated that in terms of anatomy structure decipher, it's especially difficult to decipher maxillary molar and lower molar, and that film positioning was difficult to do in the process of oral radiography. What difficulties they faced in applying each kind of oral radiography techniques and which part of the oral cavity they found it hard to radiograph were analyzed as well in this study. Given the findings of the study, more intensive practice is required to help students to acquire accurate oral radiography techniques to ensure their successful job performance in the future.

• 한국가축번식학회지
• /
• 제21권3호
• /
• pp.311-319
• /
• 1997

This study was carried out to investigate the ultrastructural changes of spermatozoa obtained from 20 of 3-year-old male chum salmon(Oncorhynchus keta) collected and analysed in middle October in 1995. The ultrastructural changes of gonad of fingerlings were examined to describe the sex differentiation of this species. The results obtained in this study were as follows : In spermatozoa, the nucleus is dense and homogeneous. Two spheroidal mitochondria(about 350nm long) are situated in parallel between the nucleus and the axoneme. Spermatozoa mitochondria are assembled into an organized sheath surrounding the outer dense fibres and axoneme of the flagellar midpiece. The sheath flagellum is situated beneath the base of the sperm head. The primordial germ cells of 6.8~7.2${\mu}{\textrm}{m}$ in size, which were buried under fibrous mesenchymal tissue between gut duct and notochord of larva with a total length of 2.4cm at 50 days after hatching. In juvenile of 10.5cm in total length at 70 days after hatching, the gonad was occupied by bundles of oogonia. The dense drumstick bodies(large arrows) are observed in the nuclei of the primordial gonad and surrounding tissue cells of fingerling at 70 days after hatching. The oval Barr bodies(asterisk) are observed in the nuclei of the primordial germ cells under the mitosis(2n). Note the large mitochondria, ribosomes and rough endoplasmic reticulum in the cytoplasm. Accordingly, the fingerlings at 70 days after hatching are identified as the female(xx). In result, the gonadal sex differentiation begins from the 70 days after hatching in chum salmon.

• 센서학회지
• /
• 제14권2호
• /
• pp.78-84
• /
• 2005

A contactless recharging device for totally implantable middle ear systems has been designed as a pillow type that the user can recharge the implanted battery with taking a rest. The proposed device uses the electromagnetic coupling between the transmitting coil and the receiving coil. To supply sufficient power for the implanted circuits, each coil uses LC resonance and the implanted device uses voltage doubler. A power MOSFET is used for switching the DC voltage of LC parallel circuit and the switching frequency demands on a programmable frequency generator which is controlled by microcontroller. In order to improve the electromagnetic coupling efficiency at specific positions of coil which may vary with the displacement of head, the optimal location of receiving coil was studied, and the 5 transmitting coils in a pillow for recharging the implant module was designed. From such a recharging experiment, it was found that the proposed device could provide the sufficient operating voltage within the distance of 4 cm between pillow and the implanted device.

• 한국해양바이오학회지
• /
• 제3권1호
• /
• pp.54-60
• /
• 2008

Compared to other North African countries, Tunisia has reached a significant level of fish consumption. The only relevant historical dimension of aquaculture in Tunisia are traditional lagoon management (80,000 ha of lagoon and coastal lakes) and culture of shellfish. Semi-intensive and intensive cultures are relatively new concepts in Tunisia and only recently also the public sector is involved. The Tunisian fishing industry has expanded over the last 20 years and annual catches at present are more than four times those registered in mid-fifties. Production of the year 2007 reached 105 thousand tons against 111 thousand tons during the same period of 2006 thus recording a fall of 5%. Unfavorable weather conditions mainly during the last quarter year had the effect to reduce the number of days out at sea. Exports reached 24.3 thousand tons for one value 240.5 MD against respectively 22.2 thousand tons and 234.1 thus recording MD at the end of the past year a rise of 9% in volume and from 3% in value. Commercial value such as shellfish - consequence of one regression of the production - with in parallel raises blue fish exports. The imports were stabilized in volume of 39.1 thousand tons and increased from 6% in value with respectively 67.4 MD in 2007 against 63.7 MD at the end of 2006. The importation in larger quantities of intended fish to the fattening of tuna in floating cages explains partly this rise. Nevertheless, the pay of balance import/export of produced fishing remains positive with a surplus of 173.1 MD against 170.4 MD in 2006.

• 암석학회지
• /
• 제28권3호
• /
• pp.217-225
• /
• 2019

강원도 평창군 뱃재터널의 북쪽 입구 사면에서 대규모 횡와습곡이 확인되어 이를 기재하고 형성기작에 관해 해석하였다. 이 습곡은 고생대 조선누층군 정선석회암층 내에 수백 m 규모로 발달하고 있다. 습곡의 머리는 북쪽을 향하며, 층리와 축면엽리의 복합엽리면상에 발달하는 신장선구조($L_1$)는 남쪽으로 약 $10^{\circ}$ 침강하고 있다. 습곡 날개부에는 S-형 비대칭 습곡과 함께 A-형 또는 안상 칼집습곡들이 흔히 관찰되며 이들 습곡의 축은 습곡의 중앙부와 후면부에서 확인된 신장선구조($L_1$) 방향과 거의 평행하다. 따라서 이곳 대규모 횡와습곡은 상부가 북쪽으로 향하는 강한 연성전단작용에 의해 생성된 칼집습곡으로 고생대말-트라이아스기 송림조산운동의 결과로 해석된다.

• Nuclear Engineering and Technology
• /
• 제51권7호
• /
• pp.1738-1748
• /
• 2019

Previous research has shown that the inclined condition has an impact on the natural circulation (natural circulation) mode operation of Floating Nuclear Power Plant (FNPP) mounted on the movable marine platform. Due to its compact structure, small volume, strong maneuverability, the Integral Pressurized Water Reactor (IPWR) is adopted as marine reactor in general. The OTSGs of IPWR are symmetrically arranged in the annular region between the reactor vessel and core support barrel in this paper. Therefore, many parallel natural circulation loops are built between the core and the OTSGs primary side when the main pump is stopped. and the inclined condition would lead to discrepancies of the natural circulation drive head among the OTSGs in different locations. In addition, the flow rate and temperature nonuniform distribution of the core caused by inclined condition are coupled with the thermal hydraulics parameters maldistribution caused by OTSG group operating mode on low power operation. By means of the RELAP5 codes were modified by adding module calculating the effect of inclined, heaving and rolling condition, the simulation model of IPWR in inclined condition was built. Using the models developed, the influences on natural circulation operation by inclined angle and OTSG position, the transitions between forced circulation (forced circulation) and natural circulation and the effect on natural circulation operation by different OTSG grouping situations in inclined condition were analyzed. It was observed that a larger inclined angle results the temperature of the core outlet is too high and the OTSG superheat steam is insufficient in natural circulation mode operation. In general, the inclined angle is smaller unless the hull is destroyed seriously or the platform overturn in the ocean. In consequence, the results indicated that the IPWR in the movable marine platform in natural circulation mode operation is safety. Selecting an appropriate average temperature setting value or operating the uplifted OTSG group individually is able to reduce the influence on natural circulation flow of IPWR by inclined condition.

• 한국지반공학회논문집
• /
• 제25권1호
• /
• pp.41-54
• /
• 2009

본 연구는 터파기 형태의 건설공사에서 레이커나 지반앵커 등의 추가적인 버팀이 필요 없는 2열 H-파일을 이용한 자립식 흙막이(SSR) 공법에 대한 것이다. SSR 공법은 사면파괴 방지용 억지말뚝의 역할을 하는 후열말뚝으로 1차적인 토압을 감소시켜 흙막이 벽체의 토압을 분담하고 억지말뚝과 흙막이 벽체의 일체화를 통해 흙막이 벽체의 강성을 증대시킴으로써 레이커나 지반앵커 등의 지보재가 필요 없이 지반굴착을 수행할 수 있는 자립식 흙막이 공법이다. 본 연구에서는 SSR 공법에 대한 실내모형실험 결과를 통하여 굴착에 따른 지반 및 흙막이 구조체의 변협과 토압특성을 분석하였으며, 여러 현장적용 사례와 계측결과를 통하여 굴착방법에 따른 흙막이 가시설의 실제 변형 특성 및 공법의 적용성을 평가하였다. 평가결과, 발생변위가 모두 계측 허용치 이내에서 만족하였다.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2018-2025
• /
• 2023

In our previous study, we proposed an integrated PG-PET-based imaging method to increase the prediction accuracy for patient dose distributions. The purpose of the present study is to experimentally validate the feasibility of the PG-PET system. Based on the detector geometry optimized in the previous study, we constructed a dual-head PG-PET system consisting of a 16 × 16 GAGG scintillator and KETEK SiPM arrays, BaSO₄ reflectors, and an 8 × 8 parallel-hole tungsten collimator. The performance of this system as equipped with a proof of principle, we measured the PG and positron emission (PE) distributions from a 3 × 6 × 10 cm³ PMMA phantom for a 45 MeV proton beam. The measured depth was about 17 mm and the expected depth was 16 mm in the computation simulation under the same conditions as the measurements. In the comparison result, we can find a 1 mm difference between computation simulation and measurement. In this study, our results show the feasibility of the PG-PET system for in-vivo range verification. However, further study should be followed with the consideration of the typical measurement conditions in the clinic application.