• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.1948-1966
• /
• 1991

본 연구에서는 2상 횡유동을 받는 튜브군의 진동 메카니즘을 규명하기 위한 실험계획의 일환으로 실시된 실험으로부터 튜브군의 유체탄성 불안정성 상수에 관해 고찰하였다. 실험은 먼저 p/d=1.47 및 1.32 튜브군에 대해 수행되었는데, 이들 튜브 군의 결과는 참고문헌에 발표하였다. 본 논문은 후속 실험으로 수행된 p/d=1.22인 튜브군을 사용하여 유체탄성 불안정성 상수를 고찰한 참고문헌의 후속논문이다. 실 험은 액체상태로 부터 99% 보이드율(void fraction)까지 변화된 2상 유동에서 튜브가 유체탄성 불안정성 상태에 도달할 때까지 점진적으로 증가하였다.실험결과는 p/d= 1.32 alc 1.47 튜브군의 유체탄성 불안정성 결과들과 종합. 비교되었다.

• 전기학회논문지
• /
• 제61권10호
• /
• pp.1542-1547
• /
• 2012

Asynchronous phenomenon occurs on the synchronous generators under power system when a generator's amplitude of electromagnetic force, phase angle, frequency and waveform etc become different from those of other synchronous generators which can follow instantly varying speed of turbine. Because the amplitude of electromagnetic force, phase frequency and waveform differ from those of other generators with which are to be put into parallel operation due to the change of excitation condition for load sharing and the sharing load change, if reactive current in the internal circuit circulates among generators, the efficiency varies and the stator winding of generators are overheated by resistance loss. When calculation method of protection settings and logic for protection of generator asynchronization will be recommended, a distance relay scheme is commonly used for backup protection. This scheme, called a step distance protection, is comprised of 3 steps for graded zones having different operating time. As for the conventional step distance protection scheme, zone 2 can exceed the ordinary coverage excessively in case of a transformer protection relay especially. In this case, there can be overlapped protection area from a backup protection relay and, therefore, malfunctions can occur when any fault occurs in the overlapped protection area. Distance relays and overcurrent relays are used for backup protection generally, and both relays have normally this problem, the maloperation, caused by a fault in the overlapped protection area. Corresponding to an IEEE standard, this problem can be solved with the modification of the operating time. On the other hand, in Korea, zones are modified to cope with this problem in some specific conditions. These two methods may not be obvious to handle this problem correctly because these methods, modifying the common rules, can cause another coordination problem. To overcome asynchronizing protection, this paper describes an improved backup protection coordination scheme using a new logic that will be suggested.

• 한국정보통신학회논문지
• /
• 제19권4호
• /
• pp.895-902
• /
• 2015

본 논문은 대형 터치스크린을 위한 고속 터치감지 및 노이즈 제거를 위한 FDCS (Frequency division concurrent sensing) 기법을 제안한다. 기존의 터치스크린 감지방식은 대부분 구동신호를 순차적으로 인가하고 순차적으로 센싱신호를 분석하기 때문에 감지속도가 터치스크린 크기에 따라 급격히 감소하여 대형터치스크린에 적용하기 어려운 문제점이 있다. 제안된 기법은 모든 드라이브라인에 서로 다른 주파수의 신호를 동시에 인가하고 각 센스 라인의 신호를 주파수 영역에서 분석하는 기법으로 대형스크린에서도 고속의 감지속도를 제공한다. 또한 주파수영역에서 노이즈 필터링기법을 제안하여 터치감지신호는 누적하고 노이즈는 상쇄하며, 터치스크린의 주파수전달함수의 역의 특성을 가지는 pre-distortion equalizer를 적용하여 터치감도 SNR을 더욱 개선한다. 23" 대형 터치스크린 모델에 실제의 환경 노이즈를 적용하여 실험한 결과 본 제안기술이 기존 기법 대비 frame scan rate을 274%, SNR을 43dB 증가시킴을 보인다.

• 한국정보처리학회논문지
• /
• 제5권10호
• /
• pp.2725-2736
• /
• 1998

본 논문은 WRLS-VFF-VT 알고리듬을 이용한 새로운 피치 검색 방법론을 제안하도록 한다. 제안된 알고리듬에서는 VFF(가변 망각 인자)를 사용하여 유성음에서의 주 여기 펄스 시점과 관련된 성문 폐쇄 점을 확인한다. 또한 본 논문은 VFF 기반 알고리듬과 함께 기존의 EGG 와 LP-Error 방법을 이용한 피치 검색 알고리듬에서 가변 한계 값을 이용 수정된 알고리듬을 제안한다. 제안된 알고리듬들은 주기와 주기 근간에서 강인한 피치 측정 능력과 준 주기 및 비 주기성 음성 신호에서도 우수한 피치 검색 기능을 가지고 있음을 알 수 있다. 제안된 알고리듬의 우수성을 입증하기 위해 실제 사람의 자연스러운 음성 및 사람의 비정상 상태 음성에서 준 주기 및 비 주기성 음성 진동 패턴을 확인하고 검출하는 성능 측정을 통하여 표준 SIFT 알고리듬과 비교 평가하였다.

• Wind and Structures
• /
• 제10권3호
• /
• pp.287-300
• /
• 2007

Wind action is a factor of fundamental importance in the structural design of light or slender constructions. Codes for structural design usually assume that the incident mean wind velocity is parallel to the ground, which constitutes a valid simplification for frequent winds caused by meteorological phenomena such as Extratropical Storms (EPS) or Tropical Storms. Wind effects due to other phenomena, such as thunderstorms, and its combination with EPS winds in so-called squall lines, are simply neglected. In this paper a model that describes the three-dimensional wind velocity field originated from a downburst in a thunderstorm (TS) is proposed. The model is based on a semi empirical representation of an axially-symmetrical flow line pattern that describes a stationary field, modulated by a function that accounts for the evolution of the wind velocity with time. The model allows the generation of a spatially and temporally variable velocity field, which also includes a fluctuating component of the velocity. All parameters employed in the model are related to meteorological variables, which are susceptible of statistical assessment. A background wind is also considered, in order to account for the translational velocity of the thunderstorm, normally due to local wind conditions. When the translation of the TS is caused by an EPS, a squall line is produced, causing the highest wind velocities associated with TS events. The resulting vertical velocity profiles were also studied and compared with existing models, such as the profiles proposed by Vicroy, et al. (1992) and Wood and Kwok (1998). The present model predicts horizontal velocity profiles that depend on the distance to the storm center, effect not considered by previous models, although the various proposals are globally compatible. The model can be applied in any region of interest, once the relevant meteorological variables are known, to simulate the excitation due to TS winds in the design of transmission lines, long-span crossings, cable-stayed bridges, towers or similar structures.

• 전기학회논문지
• /
• 제60권11호
• /
• pp.2000-2006
• /
• 2011

Asynchronous phenomenon occurs on the synchronous generators under power system when a generator's amplitude of electromagnetic force, phase angle, frequency and waveform etc become different from those of other synchronous generators which can follow instantly varying speed of turbine. Because the amplitude of electromagnetic force, phase frequency and waveform differ from those of other generators with which are to be put into parallel operation due to the change of excitation condition for load sharing and the sharing load change, if reactive current in the internal circuit circulates among generators, the efficiency varies and the stator winding of generators are overheated by resistance loss. Where calculation method of protection settings and Logic for Protection of Generator Asynchronization will be recommended, A distance relay scheme is commonly used for backup protection. This scheme, called a step distance protection, is comprised of 3 steps for graded zones having different operating time. As for the conventional step distance protection scheme, Zone 2 can exceed the ordinary coverage excessively in case of a transformer protection relay especially. In this case, there can be overlapped protection area from a backup protection relay and, therefore, malfunctions can occur when any fault occurs in the overlapped protection area. Distance relays and overcurrent relays are used for backup protection generally, and both relays have normally this problem, the maloperation, caused by a fault in the overlapped protection area. Corresponding to an IEEE standard, this problem can be solved with the modification of the operating time. On the other hand, in Korea, zones are modified to cope with this problem in some specific conditions. These two methods may not be obvious to handle this problem correctly because these methods, modifying the common rules, can cause another coordination problem. To overcome asynchronizing protection this paper describes an improved backup protection coordination scheme using a new Logic that will be suggested.

• Bulletin of the Korean Chemical Society
• /
• 제18권12호
• /
• pp.1274-1280
• /
• 1997

The photodissociation dynamics of CH2I2 has been studied at 304 nm by state-selective photofragment translational spectroscopy. Velocity distributions, anisotropy parameters, and relative quantum yields are obtained for the ground I(2P3/2) and spin-orbit excited state I*(2P1/2) iodine atoms, which are produced from photodissociation of CH2I2 at this wavelength. These processes are found to occur via B1 ← A1 type electronic transitions. The quantum yield of I*(2P1/2) is determined to be 0.25, indicating that the formation of ground state iodine is clearly the favored dissociation channel in the 304 nm wavelength region. From the angular distribution of dissociation products, the anisotropy parameters are determined to be β(I)=0.4 for the I(2P3/2) and β(I*)=0.55 for the I*(2P1/2) which substantially differ from the limiting value of 1.13. The positive values of anisotropy parameter, however, show that the primary processes for I and I* formation channels proceed dominantly via a transition which is parallel to I-I axis. The above results are interpreted in terms of dual path formation of iodine atoms from two different excited states, i.e., a direct and an indirect dissociation via curve crossing between these states. The translational energy distributions of recoil fragments reveal that a large fraction of the available energy goes into the internal excitation of the CH2I photofragment; < Eint > /Eavl=0.80 and 0.82 for the I and I* formation channels, respectively. The quantitative analysis for the energy partitioning of available energy into the photofragments is used to compare the experimental results with the prediction of direct impulsive model for photodissociation dynamics.

• 한국물환경학회지
• /
• 제38권1호
• /
• pp.31-42
• /
• 2022

Dissolved organic matter (DOM), which changes according to various factors, is ubiquitously present from natural environments to engineered treatment systems. Only limited information is available regarding the environmental functions of DOM after bulk analyses are only applied for characterization. In this paper, latest DOM analytical techniques are briefly introduced, which include fluorescence excitation-emission matrix with parallel factor analysis (EEM-PARAFAC), size-exclusion chromatography with an organic carbon detector (SEC-OCD), carbon/nitrogen stable-isotope ratio, and Fourier transform-ion cyclotron resonance-mass spectroscopy (FT-ICR-MS). Recent examples of using advanced analyses to interpret the phenomena associated with DOM occurring in natural and engineered systems are presented here. Through EEM-PARAFAC, different components like protein-like, fulvic-like, and humic-like can be identified and tracked individually through the investigated systems. SEC-OCD allows researchers to quantify different size fractions. FT-ICR-MS provides thousands of molecular formulas present in bulk DOM samples. Lastly, carbon/nitrogen stable-isotope ratio offers reasonable tools for tracking the sources in environments. We also discuss the advantages and weakness of the above-mentioned characterizing tools. Specifically, they focus on single environmental factors (different sourced-DOM and interaction of sediment-pore water) or simple changes after individual treatment processes. Through collaboration with the advanced techniques later, they help the researchers to better understand environmental behaviors in aquatic systems and serve as essential tools for addressing various pending problems associated with DOM.

• 한국융합학회논문지
• /
• 제9권6호
• /
• pp.175-182
• /
• 2018

본 연구에서는 초음파 진동에너지가 융합된 커팅기용 공구 혼 제작에 대한 기초 연구 자료를 제작하고자 이론적방법과 유한요소해석을 병행하여 설계하였다. 고 성능의 초음파 절단을 진행하기 위해서는 횡진동이 아닌 종진동으로만 진동해야 하며, 기계적 진동에너지를 효율적으로 전달하기 위해 출력부에 최대진폭이 발생해야 한다. 따라서 공구 혼은 발진기의 가진 주파수와 공구 혼의 고유주파수가 동일하게 설계되어야만 한다. 공구 혼을 공진설계하기 위해서는 1차원 파동방정식을 이용한 이론적 접근법과, 유한요소 해석결과를 설계모델에 반영하는 방법이 있는데, 본 연구에서는 최초에 공구 혼의 대략적인 치수를 1차원 파동방정식을 통해 결정하고, 유한요소 해석 결과를 바탕으로 최적 모델을 선정하여 공구 혼의 최종 형상에 반영하였다. 이와 같은 내용을 실제 커팅용 공구 혼의 기초자료로 활용하고자 하며, 추후 제작 및 실험 데이터를 본 연구내용과 비교할 예정이다.