• 한국전기전자재료학회논문지
• /
• 제24권5호
• /
• pp.359-363
• /
• 2011

To integrate the sensor driver and logic circuits, fabricating down scaled transistors has been main issue. At this research, short channel effects were analyzed after n channel polycrystalline silicon thin film transistor was fabricated at high temperature. As a result, on current, on/off current ratio and transconductance were increased but threshold voltage, electron mobility and s-slope were reduced with a decrease of channel length. When carriers that develop at grain boundary in activated polycrystalline silicon have no gate biased, on current was increased with punch through by drain current. Also, due to BJT effect (parallel bipolar effect) that developed under region of channel by increase of gate voltage on current was rapidly increased.

• 설비공학논문집
• /
• 제11권3호
• /
• pp.321-331
• /
• 1999

A numerical study is carried out for increasing heat removal using indirect cooling system. Computation is performed for nine cases as variation of flow condition in the lower channel. As the result of this study, water is more effective than air at the same pressure loss in spite of the lower inlet velocity. In channel configuration, the vertical channel is more effective than horizontal channel because of the buoyancy effect. Under the condition that heat generation is the same, counter flow effectively decreases the temperature difference among blocks. Parallel flow is more effective than counter flow when average temperature of all blocks is considered. In the case of installing obstacles in the lower channel, it is desirable to install obstacles in the bottom of lower channel. Heat transfer rate increases as the height of obstacles increases.

• 대한전자공학회논문지SD
• /
• 제43권1호
• /
• pp.17-26
• /
• 2006

DVD용 아날로그 read channel에 사용되는 PR (1 2 2 1) 신호용 아날로그 비터비 디코더를 순환형 아날로그 병렬회로망 구조를 이용하여 설계하였다. 고 밀도의 마그네틱 기록매체나 DVD등은 인접 신호들의 영향을 많이 받게 되므로, 상호 간섭된 심볼 코드를 일정한 규칙에 따라 생성시켜 코딩하며, 재생 시에는 코딩 규칙의 부합도에 따라 디코딩하여 재생오류를 최소화 시키는 기술이 PRML이다. 이 PRML기술은 주로 디지털 기술로 구현하여 사용되고 있으나, 보다 고속 저 전력화 필요가 증대하여 최근 아날로그 기술로 구현하는 방법이 활발하게 연구되고 있다. 본 연구는 DVD read channel의 아날로그 PRML 구현에 관한 연구로서 PRML의 고속화에 가장 어려운 부분인 비터비 디코더 부분을 순환형 아날로그 병렬 회로망 구조를 이용하여 설계하였다. 설계한 PRML용 비터비 디코더는 PR (1 2 2 1) type으로 기존의 디지털 비터비 디코더 속도의 3배, 전력소모의 1/3인 성능을 보였다.

• 동력기계공학회지
• /
• 제21권5호
• /
• pp.35-40
• /
• 2017

The effects of the different rib geometries such as V-shaped continuous (case A), parallel broken (case B), and V-shaped broken (case C) ribs on the heat transfer and pressure drops in a divergent channel with $45^{\circ}$ inclined ribs on one wall or two walls are checked out. The top and bottom walls are adiabatic; two side walls are uniformly heated in the divergent rectangular channel. The tested Reynolds numbers are ranged from 22,000 to 75,000. The channel with two opposite walls inclined only has the length of test section of 1 m and the channel divergence ratio of $D_{ho}/D_{hi}=1.49$, corresponding to $1.43^{\circ}$ inclined walls. The results show in the identical pumping power that the V-shaped continuous rib (case A) with two ribbed walls is the greatest, but the parallel broken rib (case B) with one ribbed wall is the worst in the thermal performance.

• 전자공학회논문지A
• /
• 제33A권2호
• /
• pp.50-58
• /
• 1996

This paper proposes the channel-access protocol suitable to a very high speed photonic WDM network with star configuration, which can provide a high channel utilization and insensitivity to the propagation delay. The proposed protocol employs a control channel and a simple status table to deal with the propagation delay which has been a major limiting factor in the performance of the very high speed optical communication networks. The control channel transmits control information in order to reserve access on data channels, and each node constitutes a status table after the reception of control pckets which holds information about the availbility of destination node and data channel. The proposed protocol is insensitive to the propagation delay time by removing necessity of the retransmission and by allowing parallel transmission of control packet and data packets. It is proved in analysis and discrete event simulation that the proposed protocol is superior in throughput and mean delay, especially at the high load conditions compared to the existing high speed channel-access protocols.

• Applied Microscopy
• /
• 제46권1호
• /
• pp.6-13
• /
• 2016

Fluorescence lifetime imaging microscopy (FLIM) has been considered an effective technique to investigate chemical properties of the specimens, especially of biological samples. Despite of this advantageous trait, researchers in this field have had difficulties applying FLIM to their systems because acquiring an image using FLIM consumes too much time. Although analog mean-delay (AMD) method was introduced to enhance the imaging speed of commonly used FLIM based on time-correlated single photon counting (TCSPC), a real-time image reconstruction using AMD method has not been implemented due to its data processing obstacles. In this paper, we introduce a real-time image restoration of AMD-FLIM through fast parallel data processing by using Threading Building Blocks (TBB; Intel) and octa-core processor (i7-5960x; Intel). Frame rate of 3.8 frames per second was achieved in $1,024{\times}1,024$ resolution with over 4 million lifetime determinations per second and measurement error within 10%. This image acquisition speed is 184 times faster than that of single-channel TCSPC and 9.2 times faster than that of 8-channel TCSPC (state-of-art photon counting rate of 80 million counts per second) with the same lifetime accuracy of 10% and the same pixel resolution.

• 한국정보통신학회논문지
• /
• 제11권10호
• /
• pp.1968-1976
• /
• 2007

본 논문에서는 다양한 페이딩 채널을 모델화 할 수 있는 나카가미-m 확률밀도함수를 이용하여 이동통신 채널 환경에서 필연적으로 존재하는 페이딩 환경을 고려한 MC DS-CDMA시스템의 직 병렬 혼합 동기 획득 성능을 분석 하였다. 동기 획득 시스템은 검색모드(Search Mode)와 확인모드(Verification Mode)를 갖도록 설계하여 나카가미-m 확률밀도 함수를 이용하여 동기 획득에 필요한 신호검출확률(Probability of Detection), 탐지 실패 확률 (Probability of Miss), 및 오경보율(False Alarm Rate)을 이론적으로 유도하여 직 병렬 혼합 동기 획득 알고리즘의 평균 동기 획득 시간(MAT)를 유도하고 시뮬레이션을 통하여 검증하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권3호
• /
• pp.240-249
• /
• 2004

In the present paper efforts have been made to optimize InAlAs/InGaAs HEMT by enhancing the effective gate voltage ($(V_c-V_off)$) using pulsed doped structure from uniformly doped to delta doped for microwave frequency applications and reliability. The detailed design criteria to select the proper design parameters have also been discussed in detail to exclude parallel conduction without affecting the del ice performance. Then the optimized value of $V_c-V_off$and breakdown voltages corresponding to maximum value of transconductance has been obtained. These values are then used to predict the transconductance and cut-off frequency of the del ice for different channel depths and gate lengths.

• The Journal of the Acoustical Society of Korea
• /
• 제17권3E호
• /
• pp.58-66
• /
• 1998

In this paper, we analyze the effects of interference canceller on the performance of multitone DS/CDMA system proposed by Vandendorpe[5]. There are various kinds of interference canceller suggested by different researchers including parallel and successive cancellers and we adopt a canceller used by Yoon et al.[9] which is a kind of parallel canceller. We consider three kinds of interferences, that is, multipath interference(MPI), interchannel interference(ICI) and multiple access interference(MAI). The ICI is the interference between multitones. The equations for variances. are derived for the inteferences and thermal noise used for signal to noise ratio calculation. We also consider RAKE reception over multipath channel which is modeled as lowpass equivalent linear filter and three stage interference canceller used for performance improvement. We show the performance results for number of canceller stage, diversity order and number of users and draw some conclusions that interference canceller is effective in multitone DS/CDMA system and the performance is further improved with the higher order of diversity and larger number of PN chips.

• 대한전자공학회논문지SD
• /
• 제42권7호
• /
• pp.1-4
• /
• 2005

본 논문에서는 병렬식 광 인터컨넥트 응용을 위한 멀티채널 광수신기 어레이를 구현한다. 0.8$\mu$m Si/SiGe HBT 공정을 이용하여 설계한 수신기 어레이는 4채널의 전치증폭기 (transimpedance amplifier 혹은 TIA)와 PIN 광다이오드를 포함하는데, TIA는 일반적인 에미터 접지 (common-emitter 혹은 CE) 입력단을 취한다. 측정결과로서, CE TIA 어레이는 3.9GHz 주파수 대역폭과 62dB$\Omega$ 트랜스 임피던스 이득, 7.SpA/sqrt(Hz) 평균 노이즈 전류 스펙트럼 밀도 및 -2SdB 채널 간 crosstalk 성능을 가지며, 4채널 전체 모듈이 40mW 전력소모를 보인다.