• 제목/요약/키워드: Paper sludge ash

검색결과 64건 처리시간 0.022초

시멘트 혼화재로서 제지슬러지 소각재의 재활용 특성 (A Study on the Reusability of Incinerated Paper Mill Sludge Ash as Cement Additive)

  • 주소영;연익준;이민희;박준규;김광렬
    • 환경위생공학
    • /
    • 제18권2호
    • /
    • pp.34-41
    • /
    • 2003
  • The purpose of this study is to examine the effect of stabilization disposal and recycling on incinerated paper mill sludge ash as cement additives. It was investigated chemical(pH, ICP, TGA XRD) and physical(PDA, SEM) characteristics of the incineration ash. And the pozzolanic characteristics of incineration ash was applied to cement as additive to increase the compressive strength. The results were that the pH characteristic of incineration ash was strong alkalinity, the content of silica and alumina as a pozzolanic material was 50.97%, and the average particle size was $5.03{\mu}m$ respectively. When the ash contents as cement additive were varied in 0~15%(wt) of cement weight to explore the effect of the compressive strength on the solidified cement mortar, the proper amount of the incineration ash substituted was about 5~l0%(wt). Therefore we found that using the incineration ash as cement additive obtains the recycling of waste material, the stabilization disposal, the reduction of waste disposal expense, and the protection of environmental problem, too.

제지(製紙)슬러지와 연탄재가 들잔디의 생육(生育)에 미치는 영향(影響) (Influence of Paper Mill Sludge and Briquet Ash on the Growth of Zoysiagrass)

  • 구자형;김태일;안주원;김문규
    • 농업과학연구
    • /
    • 제19권2호
    • /
    • pp.153-160
    • /
    • 1992
  • 잔디상토로서 제지슬러지와 연탄재의 이용 가능성을 구명하기 위해 들잔디(Zoysia japonica Steud.)를 공시재료로하여 모래와 슬러지, 연탄재와 슬러지의 배합비율을 각각 3:1, 2:1, 1:1, 1:2, 1:3(V/V)으로 혼합하여 잔디의 생육과 적정 배합비율 등을 조사한 결과는 아래와 같다. 1. 활성슬러지는 대조구에 비해 초장, 생체중, 건물중을 2배이상 증가시켰으며, 모래와의 혼합비율간에는 슬러지가 67%혼합된 1:2구에서 가장 생육이 좋았다. 2. 단위면적당 shoot의 밀도는 모래와 활성슬러지의 혼합비율간에 큰 차이가 없이 대조구에 비해 모든 처리구에서 많았으며, 엽록소함량은 활성슬러지가 적게 혼합된 3:1, 2:1구에서는 대조구와 차이가 없었으나 슬러지의 함유량이 50%이상인 1:1, 1:2, 1:3구에서는 증가를 보였다. 3. 생슬러지는 대조구에 비해 잔디 생육이 저조하고 슬러지가 많이 함유된 1:3구에서는 파종잔디의 생육이 어려웠으나 엽록소함량은 큰 차이가 없었다. 그러나 영양번식을 하였을 경우 분얼증가는 대조구와 차이가 없거나 약간 저조한 경향을 보였다. 4. 연탄재와 활성슬러지의 혼합구는 모래 혼합구에 비해 잔디의 초장이 다소 적었으나 shoot의 밀도는 비슷하였고, 대조구에 비해 초장, 단위면적당 밀도, 생체중, 건물중, 분얼수가 월등히 증가하였다. 5. 연탄재와 생슬러지의 혼합토양은 파종된 잔디의 생육에는 불량하였으나 영양번식 잔디의 분얼을 대조구보다 증가시켰다.

  • PDF

제지애쉬가 적용된 CLSM의 일축압축강도 특성에 관한 연구 (A Study on Unconfined Compressive Strength of CLSM with Paper Sludge Ash)

  • 박정준;이인환;신은철;홍기권
    • 한국지반신소재학회논문집
    • /
    • 제18권4호
    • /
    • pp.253-262
    • /
    • 2019
  • 본 연구에서는 하수관 손상을 예방할 수 있는 CLSM을 개발하기 위하여, 산업폐기물인 제지애쉬를 이용한 CLSM의 일축압축강도 특성을 평가하였다. 이를 위해, 각각의 CLSM 배합조건에 따른 유동성시험 및 일축압축강도시험을 수행하였다. 먼저, 유동성시험 결과, 배합조건에 따라 유동성 기준을 만족하는 함수비의 범위는 24%~32%인 것으로 나타났다. 일축압축강도시험 결과, 강도는 재령일 1일에서 7일 사이에 높은 강도증가율을 보였으며, 이때 강도의 크기는 재령일 28일을 기준으로 발현된 전체 강도의 약 50% 이상인 것으로 확인되었다. 그리고 CLSM의 강도 증가는 플라이애쉬의 영향을 크게 받는 것으로 나타났지만, 개발하고자 하는 CLSM의 기준강도를 고려하면 제지애쉬의 배합이 요구되는 것으로 분석되었다. 또한 높은 시멘트 비율을 적용한 경우의 강도가 낮은 경우에 비하여 크게 발현되었지만, 기준강도를 고려하면 시멘트의 비율을 5%로 적용하는 것이 합리적인 배합조건이라고 판단되었다.

Red mud와 제지회를 혼합한 CLSM의 적정 혼합비 산정 (The Estimation of Optimal Mixing Ratio of CLSM Mixed with Red Mud and Paper Sludge Ash)

  • 노성오;김태연;이봉직
    • 한국지반환경공학회 논문집
    • /
    • 제23권4호
    • /
    • pp.21-27
    • /
    • 2022
  • 최근 GGBS 및 Fly ash 등과 같은 산업부산물과 알칼리 자극제를 활용한 알칼리 활성화 시멘트에 대한 연구가 활발히 진행되고 있다. 알칼리 활성화 시멘트는 산업부산물에 알칼리 자극제를 혼합함으로 시멘트를 사용하지 않고 강도를 발휘하는 결합재의 일종으로 대표적인 탄소저감 기술이나, 알칼리 활성화를 위해 사용되는 알칼리 자극제는 고가이며 강알칼리성으로 인한 위험성으로 현장적용에 여러 어려움이 있다. 이에 본 연구에서는 알칼리 자극제의 대체재로 Red mud의 활용방안을 모색하고자 Red mud와 제지회를 결합재로 활용한 CLSM의 유동특성, 강도특성 등의 공학적 특성과 토양오염 발생가능성을 평가하였으며, Red mud와 제지회를 혼합한 CLSM의 적정 혼합비를 제시하였다.

잔디상토로서의 제지스럿지와 연탄재 이용에 관한 연구 (Use of Paper Mill Sludge and Briquet Ash as Root Zone Soil Mixtures for Thrfgrass Culture)

  • 구자영;김태일;안주원
    • 아시안잔디학회지
    • /
    • 제6권1호
    • /
    • pp.11-22
    • /
    • 1992
  • To determine the use of waste materials as root zone soil mixtures for turfgrass culture, the effects of paper mill sludge and briquet ash on physical and chemical properties of soil and growth of turfgrasses were examined. Three turfgrass species of zoysiagrass(Zoysia japonicaSteud.). kentycky bluegrass(Poa pratensis L. 'Ram I') and creeping bentgrass(Agrostis panistris Huds 'Persucross') were cultured in 32cm diameter plastic pots containing various soil mixtures. The basic ingredients used for mixtures included sand(SD), field soil(SL), paper mill sludge(PS), sphagnum peat moss(PM) and briquet ash(BA). Seven combinations using these ingreients were mixed in different percentage by volume as follows: SD+SL+PM(80:10.10), SH+SL+PS(80:10:10), SD-PM(80:20), SD+PS (80:20), SD+BA(80:20), SD+BA+PM(60:20:20) and SD+BA+PS(60:20:20). 1. Paper mill sludge showed pH of 6.6, more than 30% of organic matter content, and higher concentrations of total N, P, k, Ca, Mg and CEC. Bulk density, fild moisture capacity and electrical conductivity of soil mixtures were increased by the comimation of 10~20% PS by volume. 2. Briquet ash showed pH of 8.0, and higher levels of P, k, Ca and Mg than those of field soiks. Bulk density, field moisture capacity and hardenss of soil mixtures were increased but vertical water flow rate and electrical conductivity were decreased by the combination of 20% BA by volume. 3. Phytotoxic effects of PS and BA on growth of turfgrasses were not found. Shoot growth of all three species was higher in soil combination of SD+BA+PS than that of SD+SL+PM added with fertilizer. However, root growth was better in soil mixtures combined with PM. Soil mixtureomposed of 60% SD, 20% BA and 20% PS by volume was most effective on growth of all three species. 4. Paper mill sludge resulted in higher N level in the leaf tissue. The contents of heavy metals such as Cd and Ph did not vary significantly among soil mixtures and species. However, the Mn level was 2~3 times higher in plants growh in mixtures containing PM compared with others, and especially it was higher in creeping bentgrass than other species.

  • PDF

제지애시와 폴리실리콘 슬러지를 활용한 무시멘트 경화체의 펄라이트 첨가율에 따른 단열특성 (Thermal insulation property according to pearlite addition ratio of non cement matrix using paper ash and polysilicon sludge)

  • 신진현;김대연;이동훈;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2018년도 추계 학술논문 발표대회
    • /
    • pp.165-166
    • /
    • 2018
  • Researches for the development of renewable energy as a fuel substitute for global warming and depletion of petroleum resources are actively being carried out. Among them, the annual growth rate of PV generation is 20.73%, which is higher than other renewable energy sources. However, the production of 1 ton of polysilicon, which is known as a raw material for solar power generation panels, generates 2 tons of waste. As the demand for PV panels increases, the problem of the treatment of polysilicon sludge is attracting attention, and studies on the utilization of polysilicon sludge are needed. Therefore, in this study, the applicability of polysilicon sludge treated as industrial waste to the lightweight panel for architectural purposes was examined.

  • PDF

폐수처리 슬럿지와 퇴비 및 목탄의 화학적 특성과 구조에 관한 연구 (A Study on the Chemical Composition and Structure of Sludge, Compost and Charcoal)

  • 임기표;위승곤
    • 펄프종이기술
    • /
    • 제35권1호
    • /
    • pp.27-32
    • /
    • 2003
  • To understand the chemical structure of sewer sludge in comparison with commercial compost and charcoal used as a soil improver, it was carried out to analyse their ash contents and metal ions, and to elucidate the chemical structure of their residuals after a sequential treatment of alcohol-benzene(1:2) extraction in Soxhlet, 3% HCl reflux and 79% H₂SO₄ hydrolysis, using CHNS analyzer and solid C-13 NMR spectrometer. The results obtained were as follows: 1. Ash content of sludge was about 46% that is higher than those of compost (17%) and charcoal (4%). 2. The residual of sludge after a sequential treatment of HCl and H₂SO₄ hydrolyses had high ash content about 23%, too. 3. The sludge seems to be suitable to the soil improver because the content of heavy metal ions in sludge was near the compost and below the organic fertilizer standard. 4. Elemental composition of sludge residual after HCl-H₂SO₄ hydrolyes was C/sub 56/H/sub 91/O/sub 12/N₂S = (C/sub 6/H/sub 10/O/sub 5/)/sub 7/(C/sub 6/H₄)/sub 7/C₂H/sub 43/O₂N₂S, similar to C/sub 103/H/sub 122/O/sub 33/N/sub 6/S = (C/sub 6/H/sub 10/O/sub 5/)/sub 6/(C/sub 6/H₄)/sub 10/C/sub 7/H/sub 22/O₃N/sub 6/S of compost. 5. The sludge residual had proved to have both considerable aliphatic and aromatic groups, but the compost residual to have mainly aliphatic groups and the charcoal to have mainly aromatic groups, through the peak analysis of solid C-13 NMR charts. 6. So, the sewer sludge is proved to have a considerable amount of aromaticity like in woody biomass containing lignin.

폴리실리콘 슬러지와 제지애시를 활용한 무시멘트 경화체의 알칼리자극제 종류 및 혼입율에 따른 강도특성 (Strength properties according to mixing type and ratio Alkali activator of Non-cement matrix using Paper Ash and Polysilicon sludge)

  • 신진현;김태현;김헌태;이동훈;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2017년도 춘계 학술논문 발표대회
    • /
    • pp.173-174
    • /
    • 2017
  • Recently, many experiments using industrial by-products have been going on in Korea and abroad. Most of the studies on blast furnace slag and fly ash have been conducted, and the blast furnace slag based two and three component experiments have been conducted in many places. Therefore, this study is an additional study of research using polysilicon sludge and paper ash, which is a study using existing industrial by-products based on blast furnace slag, as strength properties of alkali activator according to kind and mixing ratio and to obtain basic data do.

  • PDF

제지산업의 지속가능한 처리공정을 위한 제지슬러지 재활용 기술

  • 임미희;이종규;남성영;안지환
    • 세라미스트
    • /
    • 제14권2호
    • /
    • pp.7-14
    • /
    • 2011
  • This paper has investigated physicochemical properties and conventional and environmental-friendly treatment methods of paper mill sludge to emphasize the importance and necessity of the sludge recycling. The paper mill sludge generally shows high contents of calcium and water, and is mostly discharged by landfill after incineration process rather than being recycled due to technical or economical problems. In recent years, however, several possible methods for recycling the paper mill sludge have been suggested for its sustainable process as follows; compost, raw material for the construction and paper industry, new energy source for reducing fossil fuel use and raw material of activated carbon for treating paper mill wastewater. Thus the authors suggest that practical recycling technologies of the paper mill sludge must be developed for substantiality in the paper industry through comprehending physicochemical compositions and generation status of the sludge and actively performing various related studies. Furthermore, this investigation could be used as preliminary information for the study on recycled paper development using paper mill sludge incineration ash.

  • PDF

플라이애시 및 폴리실리콘 슬러지 혼입율에 따른 제지애시 경화체의 경량 특성 (Lightweight Properties of Matrix using Paper Ash according to Replacement Ratios of Fly Ash and Polysilicon Sludge)

  • 박선규;김윤미;이상수
    • 한국건설순환자원학회논문집
    • /
    • 제2권2호
    • /
    • pp.166-171
    • /
    • 2014
  • 기포콘크리트의 재료 중 시멘트는 제조과정 중에 $CO_2$를 다량 발생시키기 때문에 지구 환경적인 측면에서 커다란 문제가 되고 있지만, 아직까지 시멘트를 대체할 수 있는 대체재에 대한 연구 개발이 미흡한 실정이다. 또한, 발포제는 압축강도가 낮고 고가인 단점이 있다. 이 때문에 강도와 경량 등의 성능 개선과 친환경적인 재료의 사용이 필요한 실정이다. 이에 본 연구에서는 시멘트와 발포제를 대체하기 위해 고로슬래그와 제지애시를 사용하여 경량 경화체를 제조하고자 하였으며, 강도 및 경량성을 보완하기 위해 플라이애시와 폴리실리콘 슬러지를 사용하여 실험을 실시하였다. 그 결과, 플라이애시를 사용한 경화체는 Plain 보다 낮은 밀도를 나타내었으나 강도보완에는 취약하였으며, 폴리실리콘 슬러지를 사용한 경우는 3%치환한 경화체가 압축강도는 Plain보다 다소 낮지만 겉보기 밀도의 감소가 큰 것으로 나타났다.