• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.1
• /
• pp.153-166
• /
• 2010

The study analyzes the lower-trunk sizes of 7-12 year old elementary school boys and compares sizes with boys, juniors, and men for analyzing and image fit. For the study, the data of SizeKorea (2004) was analyzed. Waist, hip, and the ratio of hip-thickness to hip-width were significantly different between age groups as well as between boys, juniors, and men. In the same height group, over 145cm boys had bigger waist than juniors and smaller waists than men. Therefore, the difference of waist size and the length of leg could cause the dissatisfaction of the pant fit when tall and plump boys chose a corresponding pants size to individual height or waist. The hip-thickness of body and pants patterns were compared in the analysis of the ease of hip-thickness. Tall and plump boys will feel discomfort in the crotch area because of the insufficiency of the hip-thickness of pants. Therefore, the amount of crotch extension of individual pants should be calculated by hip size instead of using the fixed amount. The reference sizes for discriminative pants for tall and plump boys were analyzed for a better fit.

• Journal of Fashion Business
• /
• v.17 no.3
• /
• pp.85-98
• /
• 2013

Fabric industry has been developing enough to introduce diverse stretch materials to apparel market, so that tightly fitting leggings designs are taking over not only sports wear but also women's clothing. This study is aimed at developing prototype designs for leggings pants using stretch material that are appropriate for the lower part of body being functional, comfortable, and beautiful. As well, the study is intended to be of a reference in manufacturing such products. Some of the most popular leggings on the market in their kinds and materials were primarily selected to be tested in two ways: wear test and appearance test. Again, the test pants went through the same kinds of two tests, which turned out two designs. Finally, the test pants were treated to yield the most desirable prototype design. In conducting all these tests, some major defects causing discomfort and shortcomings of the leggings pants on the market were exposed and through the wear tests, the drawbacks were seen to be complemented in a big way. Thus, it is hopefully expected that this study will serve as a good reference for developing stretch pants.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.1
• /
• pp.90-100
• /
• 2013

This study uses a survey questionnaire to identify the major customer age class of adult women who frequently mountain climb as well as analyze their purchasing behavior and preference of mountain climbing pants. The field survey, classified the types of mountain climbing pants, selected the types of mountain climbing pants that consumers preferred, and then analyzed the degrees of satisfaction for mountain climbing pants based on an evaluation of wearing. Specifically, the patterns of mountain climbing pants preferred by national brands and licensed brands were compared and analyzed. The validities of commercially available mountain climbing pants were analyzed through an evaluation of wearing comfort and an evaluation of wearing on a 3D simulation of the human body. The basic data for the development of mountain climbing pants are presented based on the results. The survey questionnaire results indicate that the major class of women consumers of mountain climbing goods was in the 40s to 50s; in addition, the types they most wore were straight type and functional cut type. The preferred brand was KOLONSPORT (which occupies a 21.2% market share), followed by THE NORTH FACE (13.0%), K2 (11.5%) and Kolping (10.0%). The main reason (26.8% of responses) that they preferred these brands was functionality. The difference in measurement of climbing pants patterns could be analyzed accurately in the pattern analysis, the wearing evaluation by the self-sonsory test and evaluation of wearing comfort through 3D simulation. The results of ANOVA on motions and items indicates that no significant difference was found among motions; however, a significant difference was recognized among items. A comparison of straight type and functional cut type showed that the functional cut type excelled slightly in wearing comfort.

• Journal of Fashion Business
• /
• v.20 no.4
• /
• pp.153-171
• /
• 2016

With the advent of smart clothing for health care and sports, the sophisticated designs with curved seams are drawing attention. One of the problems in those clothing is to determine the design curves in 2D pattern, such that it corresponds to the lines on the intended 3D body. Moreover, the difficulty increases when the original pattern needs to be changed for various sizes and body types. We compare two methods of pattern enlargement in this paper: one is the offset/projection type, and the other is the split grading type. For the enlarged pattern with offset/projection type, the 3D surface offset was first adopted to transform the standard lower body to the target larger size; next, the design lines were projected to the new 3D surface, following which the 3D pattern was developed from the newly transformed 3D surface. In the second method, the enlarged pant patterns were developed by the split grading method. Here, a 3D pattern was developed from the initial body, and then enlarged to the target size by the conventional split grading method. Two feminine pants patterns were examined by 3D virtual fitting. We observed that the 3D offset/projection pants pattern was well fitted, having an evenly distributed surplus, as compared with the sample developed using the split grading method. The difference between the two patterns were apparent at the location where several curved lines merged.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.2
• /
• pp.79-91
• /
• 2021

This study aims to rectify the disfigurement of bowlegged, (which means they have a gap between knees due to knee joint problems) females in their twenties through the development of pants patterns. The contents of the study are as follows: First, two types of basic pattern-making methods were selected. Two mock-ups, which were made by using these pre-selected basic patterns, were worn by three bowlegged participants and evaluated with a fit test. A basic pattern, which had good body fit was selected, which had a bubble or a wedge at in crotch area and roomy or snug upper thigh. Second, the mock-up, which was made by using the selected basic pattern, led to the outward movement of crease lines. Two types of patterns that were adjusted were evaluated through a fit test. As a result, an effective adjustment for moving the crease line to the outside or to the center was to cut along the slash line of a horizontal balance line to, but not through the crotch seam to spread the pattern at the hip. Third, three patterns were readjusted using the chosen alteration pattern, and the crotch seam and spread patterns of 1 cm, 2 cm, and 3 cm at the hip were applied. As a result of the evaluation of the fit test, three participants-the majority-showed a better fit when the spread amount in the pattern was 2 cm, although every participant did have a different gap between the knees. This study has significance in which rectifies the disfigurement of bowlegged individuals through the development of patterns for females in their twenties who are bowlegged.

• The Research Journal of the Costume Culture
• /
• v.23 no.2
• /
• pp.284-293
• /
• 2015

This study intends to analyze the fit of directly-imported American casual pants for Korean female college students in terms of appearance and comfortableness. The authors carried out a wearing test with sample pants from 3 brands (DKNY: A, Gap: B, Polo: C) that had the most market share and that were mostly preferred by Korean female college students. Results showed that pants A had insufficient ease in the crotch, as the depth of the crotch was short. The hip girth received a low assessment in terms of appearance. Moreover, the hem widths were wide while the pants length was long. Pants B were expected to be most appropriate for Korean women's bodies, as they had the longest crotch depth among the three brands. However, the pants appeared to pull downward due to the narrow thigh and the knee girth and hem width. Moreover, the crotch girth and hip girth received a poor appearance assessment. Pants C were rated as satisfactory for their thigh girth, knee girth, and hem width. However, the crotch was uncomfortable, as it had a short crotch depth. The hip girth received a low appearance assessment. This study suggests that a pattern adjustment is required for directly-imported American pants to provide a better fit for the bodies of Korean women. The crotch depths should be approximately 17.5 cm. The hem widths should be approximately 20 cm. We also suggest a leg length of 75 cm, a waist girth of 86 cm, and a hip girth of 97 cm.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.9
• /
• pp.1478-1486
• /
• 2008

The human body composed of concave and convex curvatures, and the current 3D scanning technology which involves inherent measurement errors make it difficult to extract distinct curvature plot directly. In this study, a method of extracting the clear curvature plot and its application to the cycling pants design were proposed. We have developed the ergonomic pattern from the 3D human body reflecting cycling posture. For the ergonomic design line on the 3D human body, the 3D information on the lower part of four male bodies with flexed posture was analyzed. The 3D scan data of four subjects were obtained using Cyberware. As results, the iteration of the tessellated shell was executed 100 times to obtain optimized curvature plots of the muscles on the body surface, and the boundaries of the curvature plots were applied to the design lines. Maximum(Max-pattern) and mean curvature plots(Mean-pattern) were adopted in the design line of the cycling pants, and performance of those lines was compared with that of conventional princess line(Con-pattern). The average error of total area and length in the 2D pattern developed from the 3D flexed body surface in this study were very minimal($4.58cm^2$(0.19%) and 0.15mm(0.46%)), which was within the range of tolerable limits in clothing production. The pattern obtained from the flexed body reflecting cycling posture already included the contraction and extension of the cycling skin, so that the extra ease for movement and good fit was not need to be considered.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.9
• /
• pp.1418-1426
• /
• 2008

This study aims to develop the functional pants for the hospitalized bed-ridden patient. The procedure of this study consisted of three parts. First, the interview survey of nursing care givers was conducted to inquire into the conditions of bed-ridden patients' clothing. Second, the bed-ridden patients' pants design and sample making were accompanied. Then, the wearing tests and design development were completed. The results are as follows; The conditions of bed-ridden patients' clothing were the convenience of clothing change, the partial opening for diaper change and medical treatment and the ventilation for bedsore prevention. The design development of the bed ridden patients' pants was accomplished which had the side seams with two way opening zippers, the wraparound pattern of abdomen and the opening under crotch applied the advantage of korean traditional underwear sokkot. The samples' wearing tests were performed three times and those subjects were the hospitalized bed-ridden patients. Consequently, we suggested the appropriate hospitalized patients' pants for bed-ridden patient.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.1
• /
• pp.123-136
• /
• 2023

To develop smart sportswear capable of measuring biometric data, we created a close-fitting pattern using two- and three-dimensional (2D and 3D, respectively) methods. After 3D virtual fitting, the tightness of each pattern was evaluated using image processing of contact points, mesh deviation, and cross-sectional shapes. In contact-point analysis, the 3D pattern showed high rates of contact with the body (84.6% and 93.1% for shirts and pants, respectively). Compared with the 2D pattern, the 3D pattern demonstrated closer contact at the lower chest, upper arm, and thigh regions, where electrocardiography and electromyography were primarily carried out. The overall average gap was also lower in the 3D pattern (5.27 and 4.66 mm in shirts and pants, respectively). In the underbust, waist, thigh circumference, and mid-thigh circumference, the cross-section distance between clothing and body was showed a statistically significant difference and evenly distributed in the 3D pattern, exhibiting more closeness. The tightness and fit of the 3D smart sportswear sensor pattern were successfully evaluated. We believe that this study is critical, as it facilitates the comparison of different patterns through visualization and digitization through 3D virtual fitting.

• Korean Journal of Human Ecology
• /
• v.19 no.3
• /
• pp.555-563
• /
• 2010

With recent advances in 3D scanning technology, three-dimensional (3D) patternmaking is becoming a powerful way to develop garments pattern. This technology is now applicable to the made to measure (MTM) system of both ordinary and tightly fitting garments. Although the pattern of fitted clothing has been developed using 3D human data, it is still interesting to develop cycling pants by considering while-cycling body posture and fabric elasticity. This study adopted the Garland's triangle simplification method in order to simplify data without distorting the original 3D scan. Next, the Runge-Kutta method (2C-AN program) was used to develop a 2D pattern from the triangular pixels in the 3D scanned data. The 3D scanned data of four male, university students aged from 21 to 25, was obtained using Whole body scanner (Model WB4, Cyberware, Inc., USA). Results showed the average error of measurement was $4.58cm^2$ (0.19%) for area and 0~0.61cm for the length between the 3D body scanned data and the 2D developed pattern data. This is an acceptable range of error for garment manufacture. Additionally, the 2D pattern developed, based on the 3D body scanned data, did not need ease for comfort or ease of movement when cycling. This study thus provides insights into how garment patterns may be developed for ergonomic comfort in certain special environments.