• 한국정보통신학회논문지
• /
• 제15권11호
• /
• pp.2313-2320
• /
• 2011

조선소에서 판넬블록 생산공정은 가장 많은 물량을 처리해야 하는 중요하고 복잡한 공정이 고, 모든 선박 및 해양구조물의 하부는 반드시 판넬블록 생산 공정을 거쳐야 하기 때문에 판넬블록 생산공정은 병목공정으로 평가된다. 공정의 생산성을 극대화하기 위해 본 논문에서는 디지털 선박생산에서 가장 중요한 기술 중의 하나인 시뮬레이션과 최적화기법을 활용하여 조선생산실행시스템(SPEXS)을 개발하였고, 판넬블록조립장 적용사례로 SPEXSPanel을 구축하여 향상된 일정계획을 수립하는 효과를 보였다. 더불어 SPEXS-Panel은 지속적인 개선을 통해 야드 생산성 향상에 도움을 줄 수 있을 것으로 기대된다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.205-209
• /
• 2000

This paper is concerned with development of the production-oriented structural design information system to predict the inaccuracy level of panel blocks and to consider the result at the structural design stage. Emphasis is placed on that the inaccuracy during production should likely be considered at the structural design stage to reduce the undesirable adjusting work and therefore to enhance the productivity. The primary goal of the present study is to consider the productivity and the efficient design at the same time for a high quality product of panel block. Usefulness of the developed information are illustrated through some application examples.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1009-1010
• /
• 2008

This paper presents a real-time aging measurement and feasible compensation system for the prolonged lifetime of OLED panel. The proposed system is composed of four parts, a PC with a man-machine interface, a measurement block, an adaptive amplifier block, and a compensation block. We apply a tree algorithm for less complexity and convenience of measurement on the degree of aging. An adaptive multi-stage differential amplifier is also implemented to deal with a various range of input voltages at the same spot.

• 한국CDE학회논문집
• /
• 제13권1호
• /
• pp.36-44
• /
• 2008

This paper proposes a modeling and simulation process of a panel production line (PPL) in a shipyard. The panel production line is an assembly process to produce a main panel of a flat block and a curved block. In this paper, its activity analysis is carried out using expression of IDEF0, and its process is qualitatively and quantitatively analyzed and modeled by Petri Nets. A commercial discrete event simulation tool, $QUEST^{TM}$, is used for virtual PPL and simulation. The modeling results by Petri Net are mapped to elements of the simulation tool. Finally, an integrated simulation environment of PPL is implemented in order to efficiently utilize the virtual PPL model. With the help of IDEF0 and Petri Nets, we could systematically analyze and describe the PPL process that are characterized as being concurrent, asynchronous, distributed, parallel, nondeterministic, and/or stochastic. Also, the dynamic and concurrent activities of a PPL system were able to be simulated. A timing concept can be included into the Petri nets model to evaluate performance and dependability issues of the system.

• 경영과학
• /
• 제17권1호
• /
• pp.135-144
• /
• 2000

This paper describes a scheduling problem of the panel block assembly shop in a shipbuilding industry. Because the shipbuilding is a labor intensive industry the most important consideration in a panel block assembly shop is the workload balancing. which balances man-hour weight and welding length and so on. It should be determined assembly schedule and workstation considering a daily load balancing and a workstation load balancing simultaneously. To solve the problem we develop a hybrid genetic algorithm. Hybrid genetic algorithm proposed in this paper consists of two phases. The first phase uses the heuristic method to find a initial feasible solution which provides a useful information about optimal solution. The second phase proposes the genetic algorithm to derive the optimal solution with the initial population consisting of feasible solutions based on the initial solution. Finally we carried out computational experiments for this load balancing problem which indicate that developed method is effective for finding good solutions.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.119-123
• /
• 2007

Recently, the green roofs market is active, but most constructors use former waterproofing method. So there are a lot of problems in the sub-organization of the green roofs system. I studied to use the block panel for the sub-organization of the green roofs system and I tested about the effectiveness of waterproofing, root barrier, drainage, and insulation. I have not found any problems about waterproofing, root barrier, drainage, and insulation in the results. The sub-organization of the green roofs system using the block panel is effective for waterproofing, root barrier, drainage, and insulation. We can apply it to the dried and unified execution technology.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권4호
• /
• pp.398-408
• /
• 2016

Based on non-completely hybrid flow line scheduling of panel block in shipbuilding, several uncertain factors influencing the problem were analyzed in a real environment, and a nonlinear integer programming model was built for each sub-scheduling problem. To narrow the difference between theory and application, rolling horizon and rescheduling methods are proposed. Moreover, with respect to the uncertainty of processing time, arriving time and due time, we take the minimizing of the early and delayed delivery costs as the objective, and establish an evaluation with a global penalty function. Finally, numerical experiments and a simulation analysis were undertaken to demonstrate the effectiveness of the model and algorithm.

• 상하수도학회지
• /
• 제19권2호
• /
• pp.193-199
• /
• 2005

The objective of this study was to investigate the characteristics of adhesion and detachment of algae on various materials of drainage canal in the sedimentation basin. The influence of surface washability, surface roughness, phosphorous concentration was studied using stainless steel, cement block and ceramic panel. The algae attached content of cement block was higher than that of the ceramic coating panel. The attachment varied significantly with respect to exposure time and different materials. the attachment was higher on rough surface (cement block) when compared to smooth surfaces. The content of attached algae increased with increasing phosphorous concentration in water. The detachment efficient of algae was higher on ceramic panel.

• 대한전자공학회논문지SD
• /
• 제46권2호
• /
• pp.1-8
• /
• 2009

본 논문에서는 일반적인 Folding 구조를 이용한 R-String Folding Block과 Second Folding Block을 제안하여 최대 500Msample/s로 동작하는 ADC를 설계하였다. 제안된 Folding ADC의 R-String Folding Block에서는 상위 4bit를 병렬로 처리하여 디지털 출력을 얻어내며, Second Folding Block에서는 하위 4bit를 새로운 pipeline 방식을 통해 디지털 출력을 얻어낸다. HSPICE 시뮬레이션 과정을 통해 ADC 동작을 확인하였으며 최대 샘플링 주파수인 500Msample/s로 동작할 경우의 평균 전력소모는 1.34mW로 매우 작음을 확인하였다. 램프입력을 인가하면서 디지털 출력이 변할 때의 입력전압을 측정하여 DNL과 INL을 구한 결과 DNL은 $-0.56LSB{\sim}0.49LSB$, INL은 $-0.94LSB{\sim}0.72LSB$의 특성을 나타내었다. 사용된 MOSFET 파라미터는 MOSIS에서 제공하는 $0.35{\mu}m$ 공정 파라미터이다.

• 대한조선학회논문집
• /
• 제41권1호
• /
• pp.55-63
• /
• 2004

This paper is concerned with the simulator to estimate deformation due to welding of panel blocks. An efficient computer program system has been developed which can be applied to estimation of weld-induced deformation under the given welding conditions. The theoretical background of the present simulator is described with the prediction model for the various type of weld-induced deformation. The developed simulator has been applied to estimation of weld-induced deformation in panel block assembly. This paper ends with some findings from applying the developed simulator.