• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.645-648
• /
• 2006

Recently, the method of the apartment building design has been changed from wall type structures to rahmen structures. With like this reason, dry walls are used plentifully. Especially, the gypsum board was used from previously plentifully however the weak point of it is difficult to maintain because it weak strength. For the improvement of gypsum board, light weight concrete panel using cement board is used recently. As this study is the research of the series t on the development of non-bearing light weight concrete panel using bottom ash, the purpose of this study is to obtain basic data for application in the field. The results are as follows. structure 1 satisfy domestic standard concerned with sound insulation between households at the laboratory and field test.

• 한국결정성장학회지
• /
• 제21권1호
• /
• pp.27-33
• /
• 2011

Carbon Board는 전자파 차폐 신소재로서 Design을 접목하여 Art Wall로 개발될 수 있으며, 친환경 건축 소재를 벽체 시공재로 이용할 경우, 마감재로도 사용될 수 있음이 파악되었다. Carbon Board의 필요성이 증가하고 있는 경향에 따라서, Module 구조를 가진 Tile, Panel 형태의 목판에 요구되는 그림, (성형)조각, 및 Graphic Design, Motif의 재구성 또는 결합으로 전체를 접착하거나, Point 부분만 장식하여 다양한 Style과 새로운 표현을 만들어 낼 수 있다. 본 논문은 인테리어산업에서 기대되는 목판화 기법의 Pattern Design을 MDF(Medium Density Fiber) Board와 Carbon Board에 적용하여, 내구력의 유용성에 관련하는 구조적, 물리적 특성을 비교하였다. (1) 정형(조립) (2) 표면(개량) (3) 세공(&조형)의 Detail Pattern과 Trimming Technique은 주로, 재질의 경도와 관련 밀도에 따라 Design의 변화를 나타내는 분석에서, Carbon Board도 MDF Board와 접합, 연결하여 Living system의 가치를 창조하고, 휴머니즘을 나타낼 수 있는 고급 내장재로서의 적용 가능성을 확인하였다.

• 한국안전학회지
• /
• 제30권6호
• /
• pp.40-47
• /
• 2015

In this study, temperature characteristics and fire damage form were analyzed to investigate flame spreading form and fire probability from ignition sources subject to drivit component materials which is finishing material in architecture. Ignition sources were limited to a gas torch and exterior panel board fire, and the size of the sample was manufacture in 30 cm length ${\times}$ 50 cm height ${\times}$ 5cm thickness size. Marble (inner wall) + 3 mm drivit (outer wall), marble (inner wall) + 4 mm plaster stone (outer wall), sandwich panel + 3 mm driver bit (outer wall), sandwich panel + 3 mm driver bit + insulation (outer wall), and gypsum board (inner wall) + 3 mm drivit (outer wall) were prepared for the sample. As result of the research for temperature characteristics, large temperature difference by each material was shown in $218^{\circ}C{\sim}995^{\circ}C$ at 30 seconds and $501^{\circ}C{\sim}1078^{\circ}C$ at 300 seconds. Especially when the inner wall was a plaster board, lowest temperature of $501^{\circ}C$ was shown at 300 seconds and marble inner wall showed the following lowest temperature of $900^{\circ}C$. Temperature rising over $1000^{\circ}C$ was shown in other materials. Regarding fire damage form, drivit or gypsum board outer wall parts exposed to fire showed combustion and carbonization to show calcination(breaking phenomenon) and influence of heat exposure was higher as calcination became more severe.

• KDI Journal of Economic Policy
• /
• 제38권3호
• /
• pp.17-35
• /
• 2016

In many advanced countries, most outside directors are executives, active or retired, at other firms; in other words, executives from other companies make executive compensation decisions. This situation may hinder the board of directors (BOD) in their efforts to optimize executive compensation levels objectively. Using a panel data analysis of the S&P 1500 companies, we provide supplemental evidence of whether, and to what extent, the concurrent executive employment of outside directors distorts the executive pay decisions at a given company. An unbiased fixed-effect estimation confirms that a $1.00 increase in CEO pay at outside directors' primary companies results in an approximate increase of $0.22 in CEO pay at the given company. From a policy perspective, this added agency problem - caused by the BOD and not by management - is noted as difficult to control; although a firm may establish board independence, the inherent concurrent employment of directors on a board continues to exist.

• Steel and Composite Structures
• /
• 제9권1호
• /
• pp.1-17
• /
• 2009

This paper is focused on the buckling and post buckling behaviour of rectangular corrugated board panels simply supported and subjected to compression load. The aim of the work is to understand the failure mechanism of investigated structure in order to quantify the effect of design parameters on the strength of a panel of given geometry. Two numerical models were developed adopting the finite element method. In the first one the corrugated board is represented by means of shell elements adopting an equivalent material, in the second the local structure is described in full detail modelling both straight and corrugated layers by means of shell elements and representing the connection between layers by special interface elements. The model correctness was checked by the comparison between out of plane central displacement predicted by the models and the experimental values found in literature. For the same case the effect of panel planarity error was evaluated. Finally a parametric analysis to investigate the effect of design parameters was carried out.

• 한국소음진동공학회논문집
• /
• 제17권2호
• /
• pp.149-154
• /
• 2007

Recently, the method of the apartment building design is changing from wall type to moment structure. Dry walls are used plentifully. Until now, the gypsum board is used mainly but it has many problems. For improving the problems, the light weight concrete panel using cement board is used recently. The purpose of this study is to obtain basic data for the light weight concrete panel using bottom ash. As a result, some structures satisfies domestic standard concerned with sound insulation between households at the laboratory and field test.

• 정보통신설비학회논문지
• /
• 제8권1호
• /
• pp.36-39
• /
• 2009

In this paper, we propose a 4-wire type driving circuit for resistive touch panel which was manufactured at the lab. The circuit is designed by using the touch panel controller ADS7846 and AVR microcontroller board. The test result shows that the designed circuit can give and transmit the position information of touch panel to the computer.

• 전자공학회논문지 IE
• /
• 제47권3호
• /
• pp.1-6
• /
• 2010

본 논문에서는 문자나 그래픽 같은 매우 간단한 메시지만을 표출하고 있는 소형 LED 전광판에서도 동영상이 표출될 수 있도록 임베디드 시스템을 이용한 프로세서를 설계하였다. 구현 방법으로는 임베디드 시스템에서 출력되는 24Bit의 디지털 동영상을 표출할 수 있도록 하기위하여 비디오 프로세서와 LED Display Panel을 설계한 동영상 LED 전광판을 제작하였다. 감마 보정, 밝기, 색 대비조정, 스케줄 기능, 인터넷에 의한 표출영상 변환 및 저장장치를 내장하였으며, 그래픽, 동영상 등을 소형LED 전광판에서 표출할 수 있도록 Windows CE 기반의 응용 프로그램을 설계하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.247-248
• /
• 2018

In order to secure the variability of long-life housing, dry walls are used. The composite gypsum board panel is the most frequently used infill system for the wall, and it is an excellent construction method in terms of constructability and economic feasibility. However, there are also problems such as the destruction of Ondol pipes at the bottom floor and being unable to fix the light weight steel frame (M-bar) when a variable composite gypsum board panel is used. To solve such problems, a wall with a method of fixing only the top part without fixing the bottom floor is developed, but it is difficult to identify the durability of ceiling frame according to the tensile force of stud and the safety according to the Stiffness and impact resistance (soft body) of ceiling frame. Therefore, this study verified the effectiveness of infill system for the wall by conducting experiment on the stiffness and impact resistance of composite gypsum board panel according to the reinforcement of ceiling frame (wooden frame, double saw-toothed bracket, Cross M-bar). As a result, it was possible to secure the safety of wooden frame while the impact resistance and the Stiffness of double saw-toothed bracket and cross M-bar were not secured.

• International Journal of Reliability and Applications
• /
• 제8권1호
• /
• pp.111-124
• /
• 2007

In this paper, we apply insightful statistical reliability tools to manage and seek improvements in the strengths of Oriented Strand Board (OSB). As a part of the OSB manufacturing process, the product undergoes destructive testing at various intervals to determine compliance with customers' specifications. Workers perform these tests on sampled cross sections of the OSB panel to measure the tensile strength, also called internal bond (IB), in pounds per square inches until failure. Additional stiffness strength tests include parallel and perpendicular elasticity indices (EI), which are taken from cross sectional samples of the OSB panel in the parallel and perpendicular directions with respect to the orientation of the wood strands. We explore both graphically and statistically these "pressure-to-failures" of OSB. Also, we briefly comment on reducing sources of variability in the IB and EI of OSB.