• 설비공학논문집
• /
• 제17권2호
• /
• pp.191-199
• /
• 2005

Double pane window system, in which an air layer with a finite width is filled between glasses, is used in order to increase the insulation efficiency. In the present study, a conjugate heat transfer problem of a double pane window system has been studied numerically in order to investigate the effect of an air layer on the heat transmittance of the double pane window system using a finite element method based on P2P1 basis function. In this study on the conjugate heat transfer of a double pane window system, numerically predicted Nusselt numbers with or without conjugate heat transfer effect have been compared with an available existing empirical formula. It has been found that a Nusselt number from an existing formula for an enclosed space is different from that obtained from the present conjugate heat transfer analysis mainly due to the effects of a very high aspect ratio and conjugate heat transfer mechanism. Furthermore, it has been shown that the numerically estimated optimal air thickness of the double pane window system with conjugate heat transfer effect is a little bit longer than that obtained without considering conjugate heat transfer effect.

• 설비공학논문집
• /
• 제4권2호
• /
• pp.82-95
• /
• 1992

It has been known that the application of an airflow window system reduces the energy consumption compared with conventional double pane window in a building. But how to analyze thermal load in a building with an airflow window system has not been well known. so two kinds of method (Mode 1 and Mode 2) to analyze time dependent thermal load of the building with an airflow window system are presented in this study. The results of load analysis about the model building(total area : $4521m^2$, 3 floors) by Mode 2 show that the maximum cooling and heating load in a building with an airflow window system are decreased about 12-17% and about 19.5% than with double pane glass window, and yearly energy consumption with an airflow window system is saved about about 20% than with double pane glass window.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.568-576
• /
• 2017

With an increase in the usage of LNG, there is a heightened interest about its safety aspects regarding the explosion of LNG carrier tank. The need for a cryogenic explosion-proof camera has increased. The camera has to work in cryogenic environment (below $-160^{\circ}C$) in LNG carrier. This study conducted design and heat transfer analysis of cryogenic camera to secure working time in limitation of heat source. The design with gap width of double pane windows was conducted based on simple vertical cavity model to insulate from cryogenic environment. The optimal gap width was 12.5 mm. For effective analysis considering convection within the camera, equivalent thermal conductivity method was adopted with ABAQUS. The working time of the camera predicted was over 10 h at warm-start condition. In cold-start condition, it required about 5 h of pre-warming time to work. The results of analysis were compared with the ones of the actual cryogenic test.

• 한국컴퓨터산업학회논문지
• /
• 제9권1호
• /
• pp.21-28
• /
• 2008

본 논문에서는 입술 주위 영상만으로 독화를 위한 에지 파라미터를 추출하였고, 한국어 5모음 'ㅏ/ㅔ/ㅣ/ㅗ/ㅜ'를 인식하는데 효과적임을 보였다. 발화하는 입주위의 이미지를 $5{\times}5$로 나누고, 각 영역에 소벨 연산자를 적용하여 디지털 에지 수를 구한 후, 이 값들의 관찰 오차를 정규화를 통하여 수정하고, 정규화 된 값을 파라미터로 사용하였다. 파라미터의 견인성을 확인하기 위하여, 자동 독화 시스템을 구축하였다. 인식 실험에 정상인 50명이 동원되었고, 10명의 이미지로 분석하고, 다른 40명의 이미지로 인식 실험을 하였다. 500개의 데이터를 분석하고, 이 분석을 바탕으로 신경망 시스템을 구축하였으며, 400개의 데이터로 인식 실험하였다. 신경망 시스템의 최고 인식 결과는 91.1%였다.

• 설비공학논문집
• /
• 제7권2호
• /
• pp.171-183
• /
• 1995

Generally, among many kinds of shading devices such as venetian blind, sunscreen, louver and curtain, venetian blind is using widely because the mechanism is so simple and easy to use solar insolation by controlling the slat angle. Analysis of time dependent heat transfer through the window with venetian blind is very important in order to use it effectivly. Therefore, in this study, theoretical thermal analysis method was developed to analyze time dependent heat transfer through a double pane window with and without venetian blind, and was made one module of TRNSYS(A Transient Simulation Program)program. By this way, it was analyzed that how much the variation of slat angle, slat colour and slat absorptivity of venetian blind would be affected on the heating and cooling load of building, and also which colour and angle of slat was optimal for the heating and cooling load of building.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.453-458
• /
• 2001

Analysis of radiation heating system for producing 60" size PDP panels was carried out using $RADCAD^{TM}$ software. Optimum arrangement of infrared heating elements was found to obtain uniform temperature distribution in PDP panel during heating. Heating capacity of each heater was determined to obtain an appropriate maximum panel temperature. Parametric study to find the effect of design parameters such as the thermophysical and optical properties of glass and cooling system was carried out. As a reference system, about 35 kW heating capacity was chosen to obtain about 800 K maximum panel temperature after 30 minute heating. The maximum temperature difference in panel was below 20 K. The maximum/minimum and its difference in the panel were very sensitive to the variation of the emissivity of glass and cooling block.

• 소성∙가공
• /
• 제24권6호
• /
• pp.400-404
• /
• 2015

For mass production of stamped parts, which require complicated in-press operations, it is always advisable to use a progressive die set. It is difficult to choose a progressive die set if the stamped parts need to be deep drawn and especially if they are unsymmetrical. Because unsymmetrical deep drawing parts are very sensitive to the effect of weight during moving to the next step, they are hard to exactly locate on the die face. An automotive seat side cushion panel is about 80mm high, unsymmetrical and its low edge needs hemming, so it is hard to produce even using a progressive die set. In the current paper a progressive stamping for seat side cushion panel was examined. Five strip bridges were considered to be strong enough to move to the next die as predicted by the CAE analysis.

• 설비공학논문집
• /
• 제9권4호
• /
• pp.484-496
• /
• 1997

The fluid flow and heat transfer characteristics of conjugate forced and natural convection in the triple-glazed airflow window, where the outer air passes through a space contrived between the interior and exterior window panes, were studied numerically by a finite volume method for the elliptic form of the Navier-Stokes equations. The investigation focused on the influence of window geometry, ventilastion rate and solar energy on the temperature, velocity distribution and thermal performance of the airflow window. The comparison between the triple-glazed airflow window and the enclosed triple-glazed window was also made to evaluate the effect of buoyancy upon which the thermal performance of the window depended.

• 과학기술학연구
• /
• 제4권1호
• /
• pp.1-30
• /
• 2004

이 글은 환경논쟁에서 과학기술이 종종 중요한 구실을 하고 있지만 쟁점을 과학적 합리성의 문제로 틀 지움으로써 환경문제가 지닌 사회적, 문화적, 정치적 함의를 놓치게 할 수 있음을 새만금 간척사업을 사례로 논의하였다. 정부가 새만금 사업 재개를 결정하는데 분수령이 된 새만금 환경영향 민관공동조사단의 구성은 환경단체가 정부와 동등한 위치에서 사업을 재검토할 수 있는 기회를 제공했으나 이에 못지 않게 환경논쟁을 좁은 과학논쟁으로 한정시키는 데 기여했다. 논쟁의 양쪽 당사자가 전략적으로 비중을 둔 새만금 담수호의 장래 수질오염 논쟁은 불확실하고 가치와 관련된 갯벌보전 논란을 구체적이고 객관적으로 검증이 가능한 수질문제로 환원시켰다. 나아가 이런 논쟁의 성격변화는 수질관련 데이터와 정책을 생산하는 정부에게 유리한 조건을 제공했다. 민관공동조사단 활동 이후의 정부부처 협의과정은 수질 예측 모델링을 통해 미래의 수질을 더욱 정확하게 예측하려는 환경예측과학의 사회적 구성과정이기도 했지만, 기본적으로 정부의 정치적인 논리가 과학적인 예측을 좌우한 것으로 보인다. 결국 민관공동조사단 방식의 환경갈등 해결책은 환경운동단체의 의도와는 달리 논쟁의 폭을 좁히고 지역주민보다는 과학기술 전문가를 논쟁의 주요 당사자로 만듦으로써 운동의 제도화를 초래했다. 정부가 새만금 사업의 재개를 결정한 뒤 환경운동 내부에 성찰성과 현장성, 헌신성을 강조하는 삼보일배 등 생명평화운동이 대두한 배경에는 이처럼 환경단체가 과학적 합리성을 무비판적으로 받아들였기 때문으로 추정된다.

• 한국진공학회지
• /
• 제8권4A호
• /
• pp.482-489
• /
• 1999

AC PDP(P1asma Display Pane1)s use the mixture of inert gases to generate a discharge inside the display pixels. Impurities such as CO, $CO_2$ and OH inside discharge region may deteriorate the characteristics of PDP operation during long life time of PDP. Electro-negative gas such as CO can cause the sustain pulse amplitude to rise by attaching electrons which will play an important role in the earlier stage of the discharge. MgO film is used to protect the dielectric layer in AC PDP, and is in contact with the free space of display pixel where it is filled with the inert gas mixture. So, MgO film can be a main source of impurities. In this experiment, we observed the change of impurity generation of various MgO films which were deposited by different methods, by using QMS. (quadropole mass spectrometer) The main impurites were $H_2$, CO and $CO_2$. And with the comparison of the TPD (temperature programmed desorption) result, it can be understood that impurity gases are generated by sputtering of MgO surface not by outgassing. Deposition method had effects on the characteristics of the impurity generation. The MgO film manufactured by e-beam evaporation generated more amount of impurity gases than the MgO films manufactured by sputtering or ion-plating. And also heat treatment of MgO film after deposition decreased the magnitude of impurity gas generation.