• 제목/요약/키워드: Palladium chloride

검색결과 41건 처리시간 0.025초

Syntheses of Conjugated Dienes from 1-Alkenylboronic Acids by Palladium (II) Salt

  • Kim, Jin-Il;Lee, Jong-Tae;Yeo, Kyu-Dong
    • Bulletin of the Korean Chemical Society
    • /
    • 제6권6호
    • /
    • pp.366-369
    • /
    • 1985
  • The reactions of (E)-1-hexenylboronic acid (1) or (E)-${\beta}$-phenylethenylboronic acid (2) with various olefins in acetonitrile at room temperature in the presence of lithium palladium chloride and triethylamine gave the corresponding (E, E)-conjugated dienes stereospecifically in good yields. (E)-${\beta}$-Phenylethenylboronic acid (2) was more reactive than (E)-1-hexenylboronic acid (1) in these vinylations. And these vinylations were also carried out catalytically when 10 mol % of lithium palladium chloride and cupric chloride, as the reoxidant of palladium, or 10 mol % of palladium acetate and mercuric acetate were added instead of stoichiometric amount of lithium palladium chloride.

평균입도 30 nm 이하의 산화 팔라듐(PdO) 분체의 분무열분해공정에 의한 제조기술 개발 (Preparation of Nanosized Palladium Oxide Powder with Average Particle Size Below 30 nm by Spray Pyrolysis Process)

  • 김동희;유재근
    • 자원리싸이클링
    • /
    • 제27권2호
    • /
    • pp.32-37
    • /
    • 2018
  • 본 연구는 금속 팔라듐 및 산화 팔라듐의 재활용을 위한 전 단계 연구로 수행되었다. 본 연구에서는 산화 팔라듐(PdO)의 형성을 위한 열역학적 수식들을 확립하였다. 또한 고상의 염화 팔라듐($PdCl_2$)을 염산 용액에 용해시킨 염화 팔라듐 용액을 원료용액으로 사용하였다. 이 원료 용액으로부터 분무열분해 공정에 의하여 평균입도 30 nm 이하의 산화 팔라듐 분체를 제조하였다. XRD 분석 결과 생성된 분체는 오직 PdO 상이었으며 TEM 분석결과 형성된 나노 PdO 입자들은 단결정 상임을 확인하였다. 또한 생성된 PdO 분말의 비표면적은 약 $32m^2/g$이었다.

Chemical Reactions in Solid State Complexes of 1,2-Polybutadiene and Palladium Chloride : High Temperature Infrared Study

  • Lee, Joon Y.;Laurence A. Belfiore
    • Bulletin of the Korean Chemical Society
    • /
    • 제17권9호
    • /
    • pp.826-830
    • /
    • 1996
  • Fourier transform infrared (FTIR) temperature studies were performed to examine the microstructural changes that occur in annealing process of the thin films of 1,2-polybutadiene (1,2-PBu)/palladium chloride (PdCl2) complex. The disappearance of the infrared absorption intensities at 1640, 1418, 994 and 910 cm-1 signifies the consumption of 1,2-vinyl groups of 1,2-PBu. The progressive loss of unsaturation and production of methyl groups as a function of temperature were identified by the enhanced infrared absorption intensities at 1447 and 1375 cm-1. The loss of pendent carbon-carbon double bond is considered to involve both palladium-catalyzed addition reaction and thermally induced cyclization.

Preparation of Nanosized Palladium-Graphene Composites and Photocatalytic Degradation of Various Organic Dyes

  • Kim, Jae Jin;Ko, Weon Bae
    • Elastomers and Composites
    • /
    • 제51권1호
    • /
    • pp.10-16
    • /
    • 2016
  • Nanosized palladium particles were synthesized using palladium(II) chloride, trisodium citrate dihydrate, and sodium borohydride under stirring condition. Nanosized palladium-graphene composites were prepared from palladium nanoparticles, and graphene was enclosed with polyallylamine under stirring condition for 1 h followed by ultrasonication for 3 h. Nanosized palladium-graphene composites were heated in an electric furnace at $700^{\circ}C$ for 2 h and characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. UV-vis spectrophotometry was used to evaluate the nanosized palladium-graphene composites as a catalyst in the photocatalytic degradation of various organic dyes such as methylene blue, methyl orange, rhodamine B, and brilliant green under ultraviolet light at 254 nm.

Cyclohexane Oxidations by an Iron-Palladium Bicatalytic System; Soluble Catalysts and Polymer Supported Catalysts

  • 준기원;심은경;박상언;이규완
    • Bulletin of the Korean Chemical Society
    • /
    • 제16권5호
    • /
    • pp.398-400
    • /
    • 1995
  • Selective oxidation of cyclohexane in acetone solution has been studied using iron catalysts with hydrogen peroxide in-situ produced by palladium catalyst. Iron tetraphenylporphyrin chloride shows the highest activity among the tested chlorides and porphyrin complexes of some metals of the first transiton series. Iron chloride and iron tetraphenylporphyrin chloride were supported on four kinds of 4-vinylpyridine copolymer with styrene or divinyl-benzene. Nitrogen 1s photoelectron spectra give the evidence that pyridyl nitrogens of the 4-vinyl pyridine copolymer act as ligands to bind iron species. The copolymer with styrene is the most efficient support for the binding because its solubility in catalyst preparation solvent (methylene chloride) gives the pyridyl group advantage to contact with the iron catalysts. However, better catalytic activity per iron atom could be obtained with a rigid crosslinked polymer due to active site isolation.

팔라듐 촉매를 이용한 Vinylmercuric-chlorides 의 CO 첨가 호모커플링반응 (Palladium-Catalyzed Carbonylative Homocoupling Reaction of Vinylmercuric Chlorides with Carbon Monoxide)

  • 김진일;이광혁
    • 대한화학회지
    • /
    • 제33권6호
    • /
    • pp.657-661
    • /
    • 1989
  • 팔라듐 촉매를 이용한 vinylmercuric chlorides의 CO 첨가반응과 커플링반응을 동시에 진행시키는 CO 첨가 호모커플링반응을 실시하여 대칭 디비닐케톤 또는 디비닐 ${\alpha}$-디케톤을 비교적 좋은 수득율로 얻었다. 디비닐케톤과 디비닐 ${\alpha}$-디케톤의 최적 합성조건을 규명하기 위하여 여러가지 vinylmercuric chlorides의 대표적인 모델로서 (E)-styrylmercuric chloride를 선택하여 촉매의 종류 및 그의 양, 염기, 용매 및 반응온도 등의 조건에 따른 수득율의 변화를 조사하였다. 촉매로 10mol%의 dichlorobis(triphenylphosphine)palladium(II), 염기로 등몰의 Pyridine, 10mol%의 요오드 및 10기압의 일산화탄소 존재하에, acetonitrile 용매 중 50${\circ}$C에서 반응시켜 가장 좋은 수득율로 디비닐 ${\alpha}$-디케톤이 얻어졌으며, 상압의 일산화탄소와의 반응에서는 낮은 수득율로 디비닐 ${\alpha}$-디케톤을 얻었다.

  • PDF

고강도 엔지니어링 플라스틱재료의 합성 - I. Palladium-catalyzed CO Insertion 반응에 의한 전방향족 Polyamides와 Polyester의 합성 - (Synthesis and Characterization of Polyamides and Polyester Prepareds by Palladium-catalyzed CO Insertion Reaction)

  • 전창림;박상복;박내정;염성배
    • 공업화학
    • /
    • 제3권4호
    • /
    • pp.694-700
    • /
    • 1992
  • Palladium 촉매에 의한 CO Insertion Heck reaction을 고분자 중합에 응용하여 가공성이 좋은 고강도 엔지니어링 플라스틱으로 응용 가능한 flexible spacer를 가진 aromatic polyamide와 Polyester를 합성할 수 있었다. 촉매로서 dichlorobis(triphenyl phosphine) palladium(II) $(PdCl_2(PPh_3)_2)$와 Palladium chloride($PdCl_2$)를 사용하였고, 이 중합 시스템은 똑같은 조건에서 polyamide와 polyester를 합성 할 수 있는 장점이 있으므로 그 중합체의 열적성질을 DSC, TGA 등으로 조사하였는데 곁사슬이 있지 않은 aromatic polyamide와 Polyester는 amide와 ester 결합의 차이에도 불구하고 전이온도등이 거의 같았다. Hexyl부터 hexadecyl까지 alkyl 곁사슬을 2,5 위치에 이중으로 가진 phenylene dibromide와 Phenylene diamine으로부터 중합체를 합성하였는데 치환기가 없는 경우에 비하여 전이온도가 감소하였고, alkyl side chain이 hexadecyl인 경우는 뚜렷한 융점을 확인할 수 있었다.

  • PDF

$C_2$ 손대칭 리간드를 배위하는 $\pi$-Allyl-Cobalt, Palladium, Platinum 착물의 생성 (Synthesis of $\pi$-Allyl-type Cobalt, Palladium, Platinum Complexes Having a $C_2$-Chiral Ligand)

  • 엄재국;이종오;안희원
    • 대한화학회지
    • /
    • 제42권2호
    • /
    • pp.177-183
    • /
    • 1998
  • C2-손대칭 리간드(chiral ligand)의 한 종류인 (+)-11S,12S-bis [2,2'-(diphenylphosphino)benzanilido]-9,10-dihydro-9,10-ethanoanthracene과 백금과 코발트를 포함하는 착물과 각각 반응시켜, 세 종류의 새로운 착물인 $\pi$-allyl Pt(+)-11S,12S-bis[2'-(diphenylphosphino)benzanilido]-9,10-dihydro-9,10-ethanoanthracene perchlorate, $\pi$-allyl Pt(+)-11S,12S-bis[2,2'-(diphenylphosphino)benzanilido]-9,10-dihydro-9,10-ethanoanthracene chloride, (${\eta}$5-cyclopentadienyl) Co -(+)-11S,12S-bis[2,2'-(diphenylphosphino)benzanilido]-9,10-dihydro-9,10-ethanoanthracene를 얻었다. 그리고 (${\eta}$3-cyclohexenyl) Pd 착물과 대칭리간드인 1,2-bis(diphenylphosphino)ethane 과 반응시켜 새로운 착물, (${\eta}$3-cyclohexenyl) Pd1,2-bis(diphenylphosphino)ethane perchlorate를 생성하였다. 이들 착물은 NMR-, IR-, Mass-spectrometer, 원소분석등의 각종 화학분석기기에 의해 각각 확인되었다.

  • PDF

Vinylation of $\beta$-Acetoxyvinyl Mercurials with Olefins by Palladium (Ⅱ) Salt

  • Kim, Jin-Il;Lee, Jong-Tae
    • Bulletin of the Korean Chemical Society
    • /
    • 제7권2호
    • /
    • pp.142-145
    • /
    • 1986
  • Vinylation of highly hindered ${\beta}$-acetoxyvinyl mercurials with olefins in acetonitrile at room temperature in the presence of cupric chloride, as a reoxidant for the palladium, and a catalytic amount of $LiPdCl_3$ gave the corresponding conjugated dienes in moderate to good yields. The (E) or (Z) geometry in vinyl mercurials was retained in the vinylated products. The reaction was tolerant of a wide variety of functional groups ($CO_2$R, CN, OR, OAc) on either the vinyl mercurial or olefin compounds.