• Journal of Oral Medicine and Pain
• /
• 제44권4호
• /
• pp.169-173
• /
• 2019

Purpose: To determine whether the morphological features of the palatal rugae are associated with sex and age in children and adolescents. Methods: A total of 300 diagnostic models of the palatal rugae of children and adolescents were collected. The models were classified into male and female and<13- and ≥13-year-old groups. The palatal rugae pattern, and the number and length of palatal rugae plicae, were analyzed. Results: The number of palatal rugae plicae was higher in females than in males, however, the difference was negligible. In the group aged 13 years or more, the number was higher in the male group on the left side. There was no association between the number of palatal rugae plicae and age group. The type I pattern was the most common in both males and females. The length of palatal rugae plicae was greater in males than in females. There was no association between the length of palatal rugae plicae and age group. Conclusions: The number and length of palatal rugae were associated with sex, but the morphological features of the palatal rugae could not distinguish between children and adolescents. These findings suggest that the palatal rugae have limited value for identification of individuals.

• 대한소아치과학회지
• /
• 제47권2호
• /
• pp.167-175
• /
• 2020

이 연구는 혼합치열기 3급 부정교합 환자에서 RME와 facemask치료 전후에 구개 및 구개주름의 횡적 및 전후방적 변화를 평가하고, 구개주름이 교정 전후의 모델 중첩을 위한 적절한 기준 영역으로 사용될 수 있는지를 확인하는 것을 목적으로 수행되었다. RME와 facemask를 이용한 교정치료를 받은 52명의 혼합치열기 3급 부정교합 환자의 교정치료 전, 후 상악 진단모형을 이용하여 치료 전(T1), 후(T2)의 구개 및 구개주름을 계측하였다. RME와 facemask 치료로 인해 상악골과 구개에 나타나는 골성 변화에도 불구하고 구개와 구개주름의 전후방적 변화는 유의하지 않았다. 구개와 구개주름의 형태학적 변화는 주로 횡적 변화로 나타났다. 구개주름은 하방의 경조직의 해부학적 변화에 적응하여 늘어나는 것으로 보인다. 계측된 구개주름의 영역 중 3번째 구개주름의 내측점이 가장 적은 변화를 나타내었다. 이 연구에서 관찰된 구개주름의 변화는 3번째 구개주름의 내측점이 RME와 facemask 치료를 받은 환자의 치아 이동을 연구하기 위한 목적으로 교정 전후 모델을 중첩할 때 안정적인 기준 영역으로 사용될 수 있는 가능성을 보여준다.

• 구강회복응용과학지
• /
• 제21권2호
• /
• pp.105-111
• /
• 2005

It is essential to establish the suitable position for artificial maxillary anterior teeth, because of not only esthetics, phonetics, mastication, but also optimal position of artificial posterior teeth for the construction of functional and esthetic prostheses. Anatomic landmarks have been used in the arrangement of artificial teeth. Such as incisive papilla and palatal rugae are useful landmarks for positioning occlusal rim and upper anterior artificial teeth because they are relatively stable and to be identified on master cast. Therefore, if average distance between maxillary anterior teeth and landmarks in dentate subjects are measured and applied, appropriate position of occlusal rim can be initially established. In this study, to present a guide to the position of the occlusal rim for upper anterior teeth of edentulous patients, horizontal distance between anatomic landmarks were measured. Maxillary casts were made in 72 Korean dentate subjects. Horizontal distance between central incisor and incisive papilla, between incisive papilla and intercanine line, and between primary palatine rugae and gingival margin of canine were measured on each cast. The results of this study were as follows ; 1. The mean distance from the incisal edge of central incisor to the posterior border of incisive papilla was 12.1 mm (Male 12.2 mm, Female 11.9 mm). 2. The mean distance between posterior border of incisive papilla and intercanine line was 3.5 mm (Male 3.4 mm, Female 3.6 mm / Left 3.6 mm, Right 3.4 mm). 3. The mean distance from the palatal gingival margin of canine to the lateral border of primary palatine rugae was 2.4 mm (Male 2.4 mm, Female 2.4 mm / Left 2.4 mm, Right 2.3 mm). 4. On all measured items, there were no significant differencies in measured values between male and female, and between left and right sides. (P>0.05).

• The Journal of Advanced Prosthodontics
• /
• 제11권1호
• /
• pp.55-64
• /
• 2019

PURPOSE. The accuracy of denture bases was compared among injection molding, milling, and rapid prototyping (RP) fabricating method. MATERIALS AND METHODS. The maxillary edentulous master cast was fabricated and round shaped four notches were formed. The cast was duplicated to ten casts and scanned. In the injection molding method, designed denture bases were milled from a wax block and fabricated using SR Ivocap injection system. Denture bases were milled from a pre-polymerized block in the milling method. In the RP method, denture bases were printed and post-cured. The intaglio surface of the base was scanned and surface matching software was used to measure inaccuracy. Measurements were performed between four notches and two points in the mid-palatal suture to evaluate inaccuracy. The palatine rugae resolution was evaluated. One-way analysis of variance was used for statistical analysis at ${\alpha}=.05$. RESULTS. No statistically significant differences in distances among four notches (P>.05). The accuracy of the injection molding method was lower than those of the other methods in two points of the mid-palatal suture significantly (P<.05). The degree of palatine rugae resolution was significantly higher in the injection molding method than that in other methods (P<.05). CONCLUSION. The overall accuracy of the denture base is higher in milling and RP method than the injection molding method. The degree of fine reproducibility is higher in the injection molding method than the milling or RP method.

• 대한치과보철학회지
• /
• 제34권2호
• /
• pp.363-372
• /
• 1996

A common site of fracture in maxillary complete denture is on the anteroposterior midline that coincides with the notch for relief of the labial frenum. Various approaches to reduce the incidence of this type of fracture have been suggested. The most widely used technique is the reinforcement of acrylic resin denture base with several solid metal forms. But few comparative studies on the efficacy of metal reinforcements have been reported. This study was conducted to compare reinforcing effects of commonly available metal reinforcements, which include wire, metal mesh embedded in the denture base and metal plate affixed to the impression surface of denture base by silicoating technique. This was load on the posterior. The strain gauges were oriented perpendicular to the anteroposterior midline of maxillary polished denture surface at one labial and the four palatal sites Non-renforced denture was used as control. The results were as follows : 1. In the non-reinforced denture group, only tensile strains on the palatal polished surface were observed. The tensile strains decreased in the order of incisive papilla, posterior denture border area, mid palatal area and rugae area. Compressive strain was observed on the labial polished surface. 2. As compared with the non-reinforced denture group, the metal plate or the metal mesh reinforced denture groups showed reduced palatal tensile strains,and the metal mesh reinforcement had a better reinforcing effect than the metal plate. But both reinforced denture groups showed no difference in the amount of compressive strain on the labial polished surface when compared to the non-reinforced denture group. 3. The metal wire positioned just above the labial notch decreased the compressive strain on the labial polished surface. But the presence of metal wires in the palatal polished surface caused increase in tensile strains in the area.

• 대한소아치과학회지
• /
• 제35권3호
• /
• pp.523-531
• /
• 2008

상악골과 치조골 전돌을 가진 II급 부정교합 증례 중 상악 치아 발치의 적응증이 아닌 경우와 하악 구치의 전방 이동을 허용할 수 없는 경우 상악 대구치의 원심이동 기법을 사용하게 된다. Pendulum 장치는 환자의 협조도 없이 상악 대구치를 원심 이동시킬 수 있는 효과적인 장치로 소구치를 안정화시키며, 구개측 고정원을 이용할 수 있다. 하지만 구치부 정출로 하안면 고경이 증가할 수 있고, 전치부 전방 이동이 동반되며, 추벽부 조직에 손상을 줄 수 있으므로 장치의 사용과 환자 선택에 신중을 기해야 한다. 이에 pendulum 장치를 사용하여 상악 대구치를 원심 이동시킴으로써 공간 문제를 해결하고, 대구치 관계를 개선한 증례들을 보고하는 바이다.

• 대한의생명과학회지
• /
• 제16권1호
• /
• pp.1-9
• /
• 2010

In order to understand the effects of all-trans-RA on palate development, RA was injected into the abdominal cavity of pregnant mice and then the embryos were taken in the following days and analyzed morphologically as well as molecular biologically. When RA was administered at the stage of E11 or E15, the overall craniofacial development was retarded. The length from jaw to eye was shortened, compared to that of normal group. When the E11 embryos were exposed to RA, cleft lip was also found along with the cleft palate. In vitro palate culture experiment also revealed that RA caused cleft palate. When RT-PCR was performed, early stage administration of RA at E11 inhibited the upregulation of Hoxa7 expression at E15 through E17. Whereas in control group, high level of Hoxa7 expression was detected in the palate of E15 to E17. In the case of Bax, the expression was decreased from E16, while remaining constant in control group. When TUNEL analysis was performed following the RA treatment at E15, TUNEL positive cells were detected in the mesenchymal cells as well as epithelial cells of palatal shelves of E16 and in E17 embryos. Whereas in normal control, TUNEL positive cells were observed mostly at the epithelium around the nasal cavity and oral cavity where rugae is made. These results altogether indicate that exposure to RA during palate development causes facial deformity including cleft palate and cleft lip by modulating the expression of homeotic genes such as Hoxa7 as well as an apoptosis-related gene, Bax, and thus malregulating the apoptosis.