• 대한치과교정학회지
• /
• 제12권2호
• /
• pp.95-108
• /
• 1982

The purpose of this study was to analyze the growth and development of tooth germ and dental arch related to the bone growth during the fetal period. From 70 maxillae and 61 mandibles of the fetus aged 5, 6, 7, 8, 9 and 10 months, X-ray films were taken and measured. The results were as follows; 1. There was remarkable bone growth in the anterior and posterior area of palatum osseum, that were the intetior portion of both deciduous canines anteriorly and the intero-posterior portion of both deciduous second molars posteriorly, where there was active bone growth and radiate formation of bony trabeculae was found. 2. The Growth of anterior tooth germ was greater than that of posterior tooth germ, so anterior tooth germs were crowded. Especially in maxilla, the tooth germs of deciduous lateral incisors were located inside of dental arch and the tooth germs of deciduous canines were located outside of dental arch. 3. Crowding amount increased with the fetal age because the growth of tooth germs was greater than that of jaw bone. 4. In the growth of upper dental arch, the increase of width was greater than that of length. 5. There was proportional relationship between the area of Palatal Trapezoid and the fetal age.

• The Journal of Advanced Prosthodontics
• /
• 제9권4호
• /
• pp.315-320
• /
• 2017

PURPOSE. The aim of this investigation was to analyze the dimensions of clinical crowns and to classify the crown and the gingival type in the anterior teeth in Korean young adults. MATERIALS AND METHODS. Casts were obtained from 50 subjects ranging in age from 24 to 32. Measurements of length and width were made on the casts using a pair of digital calipers on the entire dentition. Crown thickness and papilla height were also measured and MDW/CL (mesiodistal width to clinical length) and CW/CL (cervical width to clinical length) ratios of the maxillary anterior teeth were calculated. The K-clustering method was used for CW/CL to classify the anterior tooth shape into three groups (tapered, ovoid, and square), and one-way analysis of variance and Duncan's post-hoc comparison were used to evaluate statistical significance between the groups. Pearson's correlation analysis was performed between tooth shape and papillary height (PH) to demonstrate the correlation between tooth shape and gingival morphological characteristics. RESULTS. The average length of the maxillary central incisors was 9.89 mm; the mesio-distal width was 8.54 mm; and the ratio of width/length was 0.86 in Korean young adults. The average bucco-palatal thickness of the central incisor was 3.14 mm at the incisal 1/3 aspect. Ovoid type was the most common tooth shape (48%), followed by square type (29%) and taper type (23%) in the central incisors of Korean young adults. Tooth shape and gingival type were correlated with each other. CONCLUSION. New reference data were established for tooth size in Korean young adults and the data show several patterns of tooth shape and gingival type. Clinicians should diagnose and treat based on these characteristics for better results in the Korean population.

• 대한치과보철학회지
• /
• 제29권1호
• /
• pp.73-89
• /
• 1991

Impression ragistration is an improtant and difficult phase of prosthodontic treatment procedures and a tray of appropriate size and shape is essential to obtain the accurate impression. Particularly, in edentulous patients, the size and forms of their residual alveolar ridges are different from one another. Therefore, in this study, various measurements were taken on the edentulous models. And the measurements were analyzed and compared with one another. The results were as follows ; 1. The mean of denture bearing area was $32.86cm^2$ in the upper jaws, $24.20cm^2$ in the lower jaws and the variation of denture bearing area was greater in the upper than in the lower jaws and in males than in females. 2. The mean of A-P(anteroposterior) ridge length was 48.72mm in the upper jaws, 53.05mm in the lower jaws and that of males was longer than that of females. 3. The mean of most posterior ridge width was 47.23mm in the upper jaws, 58.03mm in the lower jaws and the difference of that between males and females was least in both jaws. 4. In the upper jaws, the mean of ridge width was 29.66mm on anterior 1/4, 42.79mm on middle, 48.95mm on posterior 1/4 line and the mean of palatal height was 4.56mm on anterior 1/4, 10.01mm on middle, 10.84mm on posterior 1/4 line. 5. In the lower jaws, the mean of ridge width was 33.24mm on anterior 1/4, 50.19mm on middle, 59.16mm on posterior 1/4 line and the mean of lingual ridge height was 5.49mm on anterior 1/4, 9.16mm on middle, 16.72mm on posterior 1/4 line. 6. The correlation coefficient(=r) between denture bearing area and A-P ridge length was 0.83 in the upper jaws and 0.75 in the lower jaws. The corelation between denture bearing area and AP ridge length was statistically significant, but, between denture bearing area and A-P ridge length and between A-P ridge length and the most posterior ridge width was not statistically significant in both jaws. 7. Alveolar ridge forms were classified into three(ovoid, "u" shape, and "v"shape) categories. In the upper jaws, ovoid was 66%, "u" shape was 24%, and "v" shape was 10%, in the lower jaws, ovoid was 66.7%, "u" shape was 20%, and "v" shape was 13.3%.

• 대한치과교정학회지
• /
• 제18권2호
• /
• pp.329-342
• /
• 1988

In methods of finding causes for cleft palate, many cases have been studied by investigators using teratogenic agents. Among them, a synthetic agent known as triamcinolone acetonide (TA) was widely used. When this drug was injected into mice during palatogenesis, it induced lowered body weight and a deformed mandible. But many cases have been studied on growth changes, only of the developmental stages of the palate. Therefore, the objective of this study was to evaluate craniofacial growth in experimentally induced cleft palate mice after finishing palatogenesis namely just before birth. Normal, alcohol treated, and TA treated DDY mice were obtained at 18-days of gestation and heads were prepared for serial sectioning in the sagittal plane. The midsagittal sections were photographically enlarged (${\times}40$) and measurements made to asses the amount of growth. The obtained results were as follows. 1. The incidence of cleft palate was 41.2% when TA was injected. 2. The body weight of the cleft palate group was lower than the control group. 3. In the cleft palate group, mandibular length (H-M) was lighter than the control group. 4. In the cleft palate group, degree of staining was not distinct compared to the control group by the double staining method. 5. In the cleft palate group, anteroposterior posture of the tongue tip to facial plane (C-M) was more posterior than the control group. 6. The cause of posterior posture of the tongue tip to facial plane (C-M) in the cleft palate group, was not short and retracted tongue but the mandibular length was increased. 7. The anteroposterior relationship of hyoid cartilage to cranial base was the same in all groups.

• 대한치과교정학회지
• /
• 제23권2호
• /
• pp.165-177
• /
• 1993

Upper canine is important because it protects and maintains the stability of the dental arch and also, joins the anterior with the posterior teeth. The incidence of impaction of upper canine is the second most frequent next to the third molar because it takes a long period of time to develop, and has a complicated path of eruption, and erupts lately. After the age of 10, clinical and radioglaphic examination can be used in revealing the possibility of impaction and efforts should be put to reduce the side effects. To prevent impaction, selective extraction of primary canine at the age of 8 to 9 could be considered and prolonged retention of primary canine in oral cavity should be avoided at this time. Once the impaction is iden, the first stage of the treatment is to lcocalize the lesion by radiographic examination and According to the severity, orthodontic traction or autotransplantation should be considered and comprehensive diagnosis and treatment plan of malocclusion should be established. Generally, labial impaction is due to arch length discrepancy and palatal impaction is due to malposition or morphologic pathosis of lateral incisors rather than arch length discrepancy. In surgical procedure, peridontal problems should be considered and the minimum amount of bone and soft tissue should be reduced and direct bonding method of many attachment methods should be recommended. Especially in traction of labially impacted canine, it should be guided to erupt through the keratinized zone and proper forced magnitude should be applied. The importance of periodontal condition should always be in mind following the patient education to mintain the good oral hygiene at each stage of treatment. Properly managed impacted canine can provide function and esthetic by proper diagnosis and treatment if extraction of canine is not indicated.

• 대한치과교정학회지
• /
• 제44권2호
• /
• pp.77-87
• /
• 2014

Objectives: This study was designed to define the Korean norm values for the Ricketts analysis. Methods: In this longitudinal study, lateral cephalograms of 31 subjects with normal occlusion were taken biennially from ages 9-19 years. Cephalometric measurements were performed. Parameters for which the 10-year change did not exceed one standard deviation were defined as unchanged. The means and standard deviations for the measured parameters were determined for each age group. Results: No significant changes in growth were observed in the molar relationship, incisor overjet, incisor overbite, mandibular incisor extrusion, interincisor angle, lower incisor tip (B1) to A point-Pogonion (A-PO) plane, upper incisor tip (A1) to A-PO plane, B1 inclination to A-PO, A1 inclination to A-PO, B1 inclination to Frankfurt plane (FH), convexity, lower facial height, facial axis, maxillary depth, maxillary height, palatal plane to FH, cranial deflection, ramus Xi position, or porion location. Continual changes over the 10 years of growth were observed in the maxillary first molar distal position to pterygoid true vertical plane, facial depth, mandibular plane to FH, anterior cranial length, mandibular arc, and corpus length. Conclusions: Clinicians can apply the Korean norms at age 9 as determined in this study when using the Ricketts analysis. The patient's age at the beginning of treatment and their sex should be taken into consideration when drawing visual treatment objectives.

• 대한치과교정학회지
• /
• 제20권3호
• /
• pp.427-446
• /
• 1990

The objective of this study was to understand the major changes of craniofacial dimensions and spatial growth pattern during the late embryonic and fetal period of human fetures. This study was performed with the selective materials of normal fetuses received from the Registry of Congenital Malformation of Seoul National University Hospital. The specimens consisted of nineteen embryos and sixty-six fetuses. The photomicrographs from mid-segittal sections of embryos were used for angular measurement, and the lateral cephalograms taken with soft X-ray were also measured in liners and angular aspects. All of the anatomical landmarks for the tracing of the photomicrographs and cephalograms were referred to the previous reports on literature. The sequential changes of prenatal craniofacial dimensions and agles were analysed statistically and discussed on the focus about the developmental growth directions of human ore-facial structure arised from heterogeneous origins. The results are as follows, 1) Cranial base angle was almost formed at about 6 weeks old embryos with the average angle of $127.4{\pm}6.33^{\circ}$ (n=3) and it was almost constant onwards. 2) The linear increase rates of anterior cranial base length and anterior facial height exceeded those of the posterior cranial base length and posterior facial height, and the maxilla grows more rapidly on the horizontal dimension than the vertical dmension during the fetal period. 3) The angular relationship between the anterior cranial base and palatal plane decreasedslightly during the fetal period, disclosing $11^{\circ}$ at 12th week gestation and $5^{\circ}$ at 41th weeks gestation. 4) Genial angle was maintained almost constantly at about $130^{\circ}$ during the fetal period from 12 weeks to 41 weeks of gestation.

• 대한치과교정학회지
• /
• 제46권3호
• /
• pp.155-162
• /
• 2016

Objective: The aim of this study was to investigate whether labial tooth inclination and alveolar bone loss affect the moment per unit of force ($M_t/F$) in controlled tipping and consequent stresses on the periodontal ligament (PDL). Methods: Three-dimensional models (n = 20) of maxillary central incisors were created with different labial inclinations ($5^{\circ}$, $10^{\circ}$, $15^{\circ}$, and $20^{\circ}$) and different amounts of alveolar bone loss (0, 2, 4, and 6 mm). The $M_t/F$ necessary for controlled tipping ($M_t/F_{cont}$) and the principal stresses on the PDL were calculated for each model separately in a finite element analysis. Results: As labial inclination increased, $M_t/F_{cont}$ and the length of the moment arm decreased. In contrast, increased alveolar bone loss caused increases in $M_t/F_{cont}$ and the length of the moment arm. When $M_t/F$ was near $M_t/F_{cont}$, increases in Mt/F caused compressive stresses to move from a predominantly labial apical region to a palatal apical position, and tensile stresses in the labial area moved from a cervical position to a mid-root position. Although controlled tipping was applied to the incisors, increases in alveolar bone loss and labial tooth inclination caused increases in maximum compressive and tensile stresses at the root apices. Conclusions: Increases in alveolar bone loss and labial tooth inclination caused increases in stresses that might cause root resorption at the root apex, despite the application of controlled tipping to the incisors.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.305-318
• /
• 2006

This study was performed to evaluate the effect on the formation of keratinized attached gingiva when free gingival graft with strip technique was used. After the partial thickness flap was prepared, it was positioned apically more than 7mm using mucoperiosteal suture. At the donor site, strip was achieved with 2mm width, less than 1mm thickness, (mesiodistal teeth length + 6)$^{\ast}$2 mm length. Then, it was divided into 2 same pieces and located at the recipient bed apico-coronally with more or less 3mm interval. Follow-up check was made at 1,2,4,8,12 weeks after the operation. The results of this study were as follows : 1. The inter-strip space was mostly filled with keratinized attached gingiva. 2. The contraction of the graft was nigligible, and 92% of planned area was filled with keratinized attached gingiva. 3. The inconvenience of the patients at donor site was minimal. 4. The width of the strip was widened. In conclusion, free gingival graft using strip technique is useful to achieve the keratinized attached gingiva maximally with free gingival graft minimally and to minimize the inconvenience of donor palatal site of the patients.

• 대한치과교정학회지
• /
• 제41권4호
• /
• pp.237-254
• /
• 2011

설측의 연속호선과 분절호선의 3차원 유한요소 모델에서 레버암의 길이와 미니스크류의 위치를 달리하여 전치부 후방 견인 시의 변위 양상을 비교하였다. 구개 경사면 견인 시, 두 호선 공히 레버암이 짧을수록 전치부의 설측 경사 이동을, 20 mm인 경우 중절치의 치체 이동 및 견치의 치근 이동 양상을 나타냈다. 정중구개봉합부 견인 시의 변위양상은 구개 경사면의 경우와 유사하였으나, 레버암이 20 mm인 두 호선에서 절치의 치체 이동 및 연속호선에서 전치부의 함입 소견을 보였다. 호선 종류에 관계없이 레버암이 길어질수록 절치의 정출은 감소하였고, 구개 경사면에서의 견인인 경우와 함께 견치의 협측 변위가 증가하였으며, 분절호선에서 변위량이 많았다. 연속호선상의 제2소구치는 근심 경사 이동 및 함입 소견을, 대구치는 레버암이 길수록 원심 이동 및 협측 변위를 나타낸 반면, 분절호선상의 구치부도 3차원적 이동 양상을 나타냈으나 변위량은 미미하였다. 전치부 후방 견인 시 레버암 작용에 의해 절치의 경사 이동과 견치의 측방 이동 경향이 있었으며, 치체 이동을 위해서는 약 20 mm의 레버암을 추천할 수 있다. 또한 호선의 종류가 치열 변위 양상 및 변위량에 차이를 나타냈다.