• 제목/요약/키워드: Paired comparison method

검색결과 188건 처리시간 0.028초

자동차 실내 소음의 음질 연구 (A Study on the Sound Quality of Passenger Cars)

  • 김정우;최종대;허정기;변언섭
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
    • /
    • pp.94-101
    • /
    • 1998
  • This paper presents the psychoacoustic analyses on the vehicle interior, noise generated when accelerating. Following the objective quantification for vehicle noises of different classes, the subjective decision process by the jury test is adopted to interrelate these results based on two different approaches. In particular, the paired comparison method is employed in assessing the sound quality in terms of the quietness, the powerfulness, and the pleasantness of the human auditory sensation. Special attention is paid to the physical interpretation of psychoacoutic parameters and their interrelation to the subjective assessment scores. In order to ensure the integrity of statistics of the survey, various tests are performed. The results show that the consistency of the "quiet" sensation is far higher than that of the "powerful" and the "pleasant" sensations. Also, it is found that the most significant parameter determining these feelings turns out to be the inherent loudness of the noise instead of the conventional indicators such as the weighted sound pressure level. It may be concluded that the psychoacoustic analysis offers more realistic evaluation for vehicle noise and assists the improvement of NVH more efficiently.ement of NVH more efficiently.

  • PDF

Pose-graph optimized displacement estimation for structural displacement monitoring

  • Lee, Donghwa;Jeon, Haemin;Myung, Hyun
    • Smart Structures and Systems
    • /
    • 제14권5호
    • /
    • pp.943-960
    • /
    • 2014
  • A visually servoed paired structured light system (ViSP) was recently proposed as a novel estimation method of the 6-DOF (Degree-Of-Freedom) relative displacement in civil structures. In order to apply the ViSP to massive structures, multiple ViSP modules should be installed in a cascaded manner. In this configuration, the estimation errors are propagated through the ViSP modules. In order to resolve this problem, a displacement estimation error back-propagation (DEEP) method was proposed. However, the DEEP method has some disadvantages: the displacement range of each ViSP module must be constrained and displacement errors are corrected sequentially, and thus the entire estimation errors are not considered concurrently. To address this problem, a pose-graph optimized displacement estimation (PODE) method is proposed in this paper. The PODE method is based on a graph-based optimization technique that considers entire errors at the same time. Moreover, this method does not require any constraints on the movement of the ViSP modules. Simulations and experiments are conducted to validate the performance of the proposed method. The results show that the PODE method reduces the propagation errors in comparison with a previous work.

검사법의 일치도 평가를 위한 분석기법 (Statistical Test of Agreement between Measurements in Method-comparison Study)

  • 박선일;오태호
    • 한국임상수의학회지
    • /
    • 제28권1호
    • /
    • pp.108-112
    • /
    • 2011
  • In clinical settings, researchers often want to assess agreement between two measurements (or tests) of the same continuous variable. For example, when new point-of-care analyzer for testing blood glucose level were introduced clinicians need to compare results from standard or established laboratory method of measurement to those of new or point-of-care analyzer. The question in a method-comparison study would either of two different methods be used to measure the same variable equivalently. In this paper common misuse of statistical methodologies seen in the medical literatures such as correlation coefficient and paired t-test are discussed. The Bland-Altman technique has been widely used for this purpose and provides a graphic in presentation of the findings from a method-comparison study, with a mean value of measurement, this bias and the limits of agreement. For ease of application and interpretation of this technique we discussed the analysis procedure and illustrated with two worked examples. Finally, a number of alternative ways in which data can be analysed and reported in such studies were reviewed.

제조방법에 따른 딸기잼의 관능적 품질 특성에 관한 연구 (Study on the Sensory Quality Characterization of Strawberry Jam by Cooking Method)

  • 김복자
    • 대한가정학회지
    • /
    • 제27권3호
    • /
    • pp.71-78
    • /
    • 1989
  • As the level of life improves, the eating habit is changing from rice meal to bread meal and at the time, eat more strawberry jam than before. We tried to study to select the good cooking method and the proper strawberry variety for the jam through the sensory evaluation We made four kinds jam of Bogyo-Joseoung and Ai-berry by different cooking methods, the result6s of the sensory evaluation are as follow: The jam of Ai-berry is better than that of Bogyo-Joseoung by the paired comparison test but the difference between those, if we add some lemon to the jam of Bogyo-Joseoung and Ai-berry, is very little. The multiple comparison test proves the sourness, if added some lemon and citric acid, become better and the color and viscosity, if added pectin, became better. The overall preference about jam, if pectin and citric acid were added together, was best. In addition, we evaluated the quality of jammed bread by multiple comparison test. The result is like this: The jam with lemon is very good in color, flavor, sourness and texture, but the jam with pectin and citric acid was the best in overall preference.

  • PDF

그래프 모형을 이용한 지수분포 모수들의 기하평균 비교에 관한 연구 (On Multiple Comparison of Geometric Means of Exponential Parameters via Graphical Model)

  • 김대황;김혜중
    • 응용통계연구
    • /
    • 제19권3호
    • /
    • pp.447-460
    • /
    • 2006
  • 본 연구에서는 확률모형의 모수로부터 얻어지는 여러 형태의 함수간의 크기를 다중 비교 하는 방법을 제안하고자 한다. 이 방법은 비교대상인 모수 함수 간의 선호확률을 베이지안 방법으로 추정하고, 이들로부터 얻어지는 선호행렬을 이용한 새로운 다중비교법이다. 이러한 방법의 제안에 필요한 이론과 비교기준을 고안하였으며, 응용 예로 제안된 방법을 s의 독립인 지수분포 모수의 기하평균 크기 비교에 적용하였다.

쌍체비교기법을 통한 중정의 시각적 선호에 관한 연구 (A Study on the Visual Preference in Enclosed Spaces Based on the Paired Comparison Method)

  • 이태희;임승빈
    • 한국조경학회지
    • /
    • 제14권3호
    • /
    • pp.3-19
    • /
    • 1987
  • The purpose of this study was to investigate desirable width / height ratio of enclosed space and to offer basic information for the design of enclosed spaces. The data of this study were gathered from the experiment through simulation. Photographic sampling of 7 campus sites located in Kwanak campus of Seoul National University and slides of perspective drawings of enclosed spaces with various D/H ratio (12, 1, 2, 4, 6, 9, 12)were used for simulation. A response format was made using the method of paired comparison and students from various departments were randomly selected for evaluation. In the method of analysis of data Thurstone's equation of Comparative Judgement was used for calculating preference score. A1so non-linear regression analysis was used for finding out relations between preference and D/H ratio. The other method of data analysis were correlation, Chi - test. And the results were summarized as follows. 1. In sketch simulation the ratio of D/H 4 got the highest preference store. This result suggests that desirable D/H ratio of enclosed space is D/H 4. And at the lower range of D/H ratio, as ratio increases, the preference score increases. At the higher range of D/H ratio, however, as ratio increases, the preference score starts to decrease from the cardinal point of D/H 4. 2. In campus photograph simulation preference is influenced by slope, elevation change of floor, trees, lawn area, familiarity, space arrangement, and exterior shape of building besides D/H ratio. 3. The preference virtue was not significantly affected by order effect. This result suggests that order effect can be ignored in the study of visual preference. 4. There are so many factors related to preference that it is difficult to explore those factors without scientific information based on scientific method. We must carry out study for scientific approach of planning and design based on precise, complete simulation technique.

  • PDF

차폐유형과 차폐도를 달리한 패럴랙스(Parallax) 공간의 시각 선호도 (An Analysis of the Visual Preference on Parallax Space by Blockage Pattern and Ratio)

  • 노재현
    • 한국조경학회지
    • /
    • 제35권2호통권121호
    • /
    • pp.55-63
    • /
    • 2007
  • The purpose of this study is to create a planting design for progressive realization. For this, visual preferences as measured via questionnaire were evaluated by the Scenic Beauty Estimation(SBE) and paired comparison methods. The results can be summarized as follows. Through photo observation, the average visual blockage ratio was 38% and the range of degree of the visual blockage ratio was $30{\sim}50%$. The sketch simulation and filtered pattern received the highest preference score and fumed out to be the most practical pattern out of all the patterns evaluated. Also, in the sketch simulation, the high preference values were observed for a distance of 9 to 12m from the view point to the blockage tree with a D/H ratio of 2. The preference score significantly decreased with the increase of the visual blockage ratio having a turning point at $30{\sim}35%$ of the visual blockage ratio, even though the distance parameters were more important than the visual blockage ratio in the scores. An outstanding view must be handled properly to be preserved or accentuated. Framed, open, enclosed, screened or filtered pattern views should be completely revealed only from their best vantage point, not given away at first glimpse. It this sense, parallax spatial beauty with trees could be improved through the visual aspects of plan arrangements and seems to be an effective design technique for landscape planning and planting design.

Comparison of Vendor-Provided Volumetry Software and NeuroQuant Using 3D T1-Weighted Images in Subjects with Cognitive Impairment: How Large is the Inter-Method Discrepancy?

  • Chung, Jieun;Kim, Hayoung;Moon, Yeonsil;Moon, Won-Jin
    • Investigative Magnetic Resonance Imaging
    • /
    • 제24권2호
    • /
    • pp.76-84
    • /
    • 2020
  • Background: Determination of inter-method differences between clinically available volumetry methods are essential for the clinical application of brain volumetry in a wider context. Purpose: The purpose of this study was to examine the inter-method reliability and differences between the Siemens morphometry (SM) software and the NeuroQuant (NQ) software. Materials and Methods: MR images of 86 subjects with subjective or objective cognitive impairment were included in this retrospective study. For this study, 3D T1 volume images were obtained in all subjects using a 3T MR scanner (Skyra 3T, Siemens). Volumetric analysis of the 3D T1 volume images was performed using SM and NQ. To analyze the inter-method difference, correlation, and reliability, we used the paired t-test, Bland-Altman plot, Pearson's correlation coefficient, intraclass correlation coefficient (ICC), and effect size (ES) using the MedCalc and SPSS software. Results: SM and NQ showed excellent reliability for cortical gray matter, cerebral white matter, and cerebrospinal fluid; and good reliability for intracranial volume, whole brain volume, both thalami, and both hippocampi. In contrast, poor reliability was observed for both basal ganglia including the caudate nucleus, putamen, and pallidum. Paired comparison revealed that while the mean volume of the right hippocampus was not different between the two software, the mean difference in the left hippocampus volume between the two methods was 0.17 ml (P < 0.001). The other brain regions showed significant differences in terms of measured volumes between the two software. Conclusion: SM and NQ provided good-to-excellent reliability in evaluating most brain structures, except for the basal ganglia in patients with cognitive impairment. Researchers and clinicians should be aware of the potential differences in the measured volumes when using these two different software interchangeably.

음질평가를 통한 고속철도 실내소음의 객관적.주관적 특성 분석 (Sound Quality Characteristics for Interior Noise of High Speed Train)

  • 박범;김동규;전진용;최성훈;박준홍
    • 한국소음진동공학회논문집
    • /
    • 제20권8호
    • /
    • pp.774-781
    • /
    • 2010
  • In Korea, the high-speed train is one of the most important mass transportation. Due to its fast speed, the interior noise level is high and it is one of major reason for passenger complaints. In this study, the response of passengers to interior noise was evaluated using sound quality parameters. The effects of various parameters, such as train types, travel speed, rail road, on the calculated sound quality were investigated. The characteristics of interior noise were identified. The obtained results were compared to auditory experimental data. For precise comparison of noises of similar loudness but with different characteristics, paired comparison method was used. From the comparison, important parameters that have influence on the annoyance and loudness of the noise were determined.

대응표본에서 AUC차이에 대한 신뢰구간 추정에 관한 고찰 (A Comparison of the Interval Estimations for the Difference in Paired Areas under the ROC Curves)

  • 김희영
    • Communications for Statistical Applications and Methods
    • /
    • 제17권2호
    • /
    • pp.275-292
    • /
    • 2010
  • 동일 환자에게 적용된 2가지 진단검사의 정확성을 비교하기 위한 방법들 중에서 두개의 ROC곡선 아래 면적(AUC; Area Under Curve)의 차이는 주요한 잣대 중 하나이다. 본 연구에서는 AUC의 차이를 추정하는 방법으로 비모수적방법, 최대가능도법, 일반화추축량에 의한 방법, 붓스트랩방법의 4가지를 포함확률(coverage probability), 기대길이 (expected length) 측면에서 모의실험을 통하여 비교하였다.