• Computers and Concrete
• /
• v.11 no.1
• /
• pp.39-49
• /
• 2013

The use of ground fly ash in concrete can increase the risk of slump loss due to the drastic surface change of the particles after the grinding treatment and the accelerated reaction compared to the untreated ash. This study is aimed at the early age hydration and time-dependent rheology changes of cement paste containing ground fly ash. An original fly ash is ground into different fineness and the hydration of cement paste containing the ground fly ash is monitored with the ultrasound propagation method. The zeta potentials of the solid particles are measured and the changes of rheological parameters of the cement pastes with time are analyzed with a rheometer. A particle packing model is used to probe packing of the solid particles. The results show that the early age hydration of the paste is strongly promoted by replacing Portland cement with fly ash up to 30 percent (by mass), causing increase of the yield stress of the paste. The viscosity of a paste containing ground fly ash is lower than that containing the untreated ash, which is explained by the denser packing of the solid particles.

• Elastomers and Composites
• /
• v.46 no.2
• /
• pp.112-117
• /
• 2011

Recently, high growth potential of barrier materials industry including high performance packing materials was expected with increasing the national income and well-being culture. As high barrier materials, polymer nanocomposites have considerable attractions due to their excellent physical properties compared to conventional composite materials. In general, polymer nanocomposites were consisted of polymer matrix and inorganic fillers, such as layered silicate, carbon nanotubes, and metal- or inorganic nanoparticles. Among these materials, layered silicate which was called as the clay was usually used as nano-fillers because of naturally abundant and most economical and structural properties. Clay-reinforced polymer nanocomposites have various advantages, such as high strength, flammability, gas barrier property, abrasion resistance, and low shrinkage and used for automotive and packing materials. Therefore, in this paper, we focused on the need of gas barrier materials and materials-related technologies.

• Journal of Rhinology
• /
• v.25 no.2
• /
• pp.86-90
• /
• 2018

Background and Objectives: Although polyvinyl acetate ($Merocel^{(R)}$) has been widely used as a packing material after septoplasty, removable nasal packing can increase patient discomfort, local pain, and pressure. Furthermore, the removal of nasal packing has been described as the most uncomfortable and distressing feature associated with septoplasty. The purpose of this study was to investigate the efficacy of polyvinyl acetate with carboxymethyl cellulose sheet ($Rhinocel^{(R)}$) nasal packing on patient subjective symptoms, degree of bleeding, hemostasis, and wound healing following septoplasty. Subjects and Method: Forty patients with nasal septum deviation requiring septoplasty were included. Following surgery, one nasal cavity was packed with $Rhinocel^{(R)}$ and the other one with $Merocel^{(R)}$. Patient subjective symptoms while the packing was in situ, hemostatic properties, pain on removal, degree of bleeding on removal, duration of hemostasis after removal, postoperative wound healing, and the cost of the pack were evaluated. Results: Although the two types of packing materials were equally effective in controlling postoperative bleeding after septoplasty, $Rhinocel^{(R)}$ was significantly more comfortable while in situ and less painful on removal than $Merocel^{(R)}$, which was associated with significantly more bleeding on removal and so more time was needed to control hemorrhage. There was no significant difference in postoperative wound healing or pack cost. Conclusion: The use of $Rhinocel^{(R)}$ after septoplasty has less discomfort, greater patient satisfaction, and less bleeding on removal with no adverse reactions compared to $Merocel^{(R)}$ packing. Therefore, $Rhinocel^{(R)}$ may be a useful packing material after septoplasty.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.3
• /
• pp.224-229
• /
• 2016

Recently, polymeric micro-fluidic biochips with numerous micro patterns on the surface were fabricated by injection molding for realizing low-cost mass production of devices. To evaluate the effects of process parameters on large-scale micro-structure replication, a $50{\times}50mm^2$ tool insert with surface structures having a patterns of trapezoidal shapes (height: $30{\mu}m$) was employed. During injection molding, PMMA was used; packing phase parameters and mold temperature were investigated. The replicated surface textures were quantitatively characterized by confocal laser microscopy with 10-nm resolution. The degree of replication at low mold temperatures was found to be higher than that at high mold temperature at the beginning of the packing stage. Thereafter, the degree of replication increased to a greater extent at higher mold temperatures; application of higher mold temperatures improved the degree of replication.

• Journal of the Korean Society of Tobacco Science
• /
• v.14 no.1
• /
• pp.57-65
• /
• 1992

The quality of cut tobacco will be deteriorated due to weather conditions such as temperature and relative humidity, when shipping and long term storaging. The change of equilibrium moisture contents in cut tobacco were under influence of relative humidity and temperature but not humectants. Therefore internal packing materials are necessary for cut tobacco to maintain initial quality, including taste, flavour and musty smell during shipping or storaging. When packing cut tobacco for shipping or long term storaging, desiralbe packing density was 200/$m^2$, For the long term storage under R.H 90% and 3$0^{\circ}C$, polyethylene film thickness suitable for packing material are above 100$\mu$, which resulted in 42days of shelf life.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.9
• /
• pp.130-137
• /
• 1996

In the present paper the effect of various process conditions on the final weight of injection molded rectangular plates has been investigated in detail. The main parameters involved in the simulations were melt temperature, mold temperature, injection speed and packing pressure. The dimensions of the plate used were 100mm long, 2mm of width and polystyrene was used as a molding material. The shear viscosity of the polymeric material was treated as a function of shear rate, temperature and pressure through the whole processes including packing and cooling stages. By increasing a packing pressure the final weight of sample increased linearly. Furthermore, as the melt temperature, the mold temperature and the injection speed increased, the final weight of the injection molded plate decreased within the molding window.

• Journal of Environmental Health Sciences
• /
• v.20 no.2
• /
• pp.73-79
• /
• 1994

The effects of packing materials in the anaerobic reactor and inorganic chemicals in the synthetic wastewater on the anaerobic treatment during the start up period were investigated using anaeroic filter process. The Ringlace and Honeycomb tube as packing materials were used in the anaerobic reactors. The Ca$^{2+}$ and Fe$^{2+}$ ion concentration as inorganic chemicals contained higher 40 times and 100 times as compared to the control synthetic wastewater, respectively. A start up period 104 and 150 days were necessary to achieve loading rate of 0.37 and 0.74 kg-Toc/m$^3$.d in the anaerobic filter process packed by Ringlace and Honeycomb tube, respectively. The loading rates of the reactor using the synthetic wastewater containing Ca$^{2+}$ (40 times) could be increased faster than in the reactors using the synthetic wastewater containing Fe$^{2+}$ ion (100 times) and control synthetic wastewater. The results of XMA analysis that a lot of the Ca$^{2+}$ ion on the surface of the anaerobic sludge in the anaerobic reactor packed by Ringlace which were fed supplied with synthetic wastewater containing Ca$^{2+}$ ion (40 times) observed as compared to the reactors supplied with control synthetic wastewater and containing Fe$^{2+}$ ion (100 times).

• The Korean Journal of Applied Statistics
• /
• v.29 no.7
• /
• pp.1421-1428
• /
• 2016

This paper concerns the freshness of rice depending on packing materials using MANOVA. Freshness of rice is measured in terms of moisture content and rice flavor. Ordinary paper and charcoal-coated paper are compared as packing materials. Storing places are considered as a block. The bivariate observations of moisture content and the rice flavor are compared using MANOVA for a completely randomized block design. It is observed that there is a significant difference between ordinary paper and charcoal-coated paper. Therefore we apply ANOVA for moisture content and rice flavor, respectively. Significant differences are observed for the moisture content but not for the rice flavor.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1284-1296
• /
• 2004

In order to investigate effects of anisotropic fiber packing on stresses in composites, a Volume Integral Equation Method is applied to calculate the elastostatic field in an unbounded isotropic elastic medium containing multiple orthotropic inclusions subject to remote loading, and a Mixed Volume and Boundary Integral Equation Method is introduced for the solution of elastostatic problems in unbounded isotropic materials containing multiple anisotropic inclusions as well as one void under uniform remote loading. A detailed analysis of stress fields at the interface between the isotropic matrix and the central orthotropic inclusion is carried out for square, hexagonal and random packing of orthotropic cylindrical inclusions, respectively. Also, an analysis of stress fields at the interface between the isotropic matrix and the central orthotropic inclusion is carried out, when it is assumed that a void is replaced with one inclusion adjacent to the central inclusion of square, hexagonal and random packing of orthotropic cylindrical inclusions, respectively, due to manufacturing and/or service induced defects. The effects of random orthotropic fiber packing on stresses at the interface between the isotropic matrix and the central orthotropic inclusion are compared with the influences of square and hexagonal orthotropic fiber packing on stresses. Through the analysis of plane elastostatic problems in unbounded isotropic matrix with multiple orthotropic inclusions and one void, it will be established that these new methods are very accurate and effective for investigating effects of general anisotropic fiber packing on stresses in composites.

• Fibers and Polymers
• /
• v.1 no.2
• /
• pp.111-115
• /
• 2000

The effects of nitrile group substitution onto aromatic polyamide backbone on the gas permeability and permselectivity of the polymers are examined. The gas permeability of aromatic polyamides increase with increasing the content of nitrile group substitution, whereas the permselectivity decreases with increasing the nitrile group contents. The effects of chain linrearity on the permeability and permselectivity are also examined. The non-linearity of the polymers increases the permeability. These behaviors are interpreted in terms of chain packing and crystallinity of the aromatic polyamides.