• 한국표면공학회지
• /
• 제54권3호
• /
• pp.139-143
• /
• 2021

Cr-Al-N coatings were deposited onto WC-Co substrates using a cathodic arc evaporation (CAE) system. CAE technique is recognized to be a very useful process for hard coatings because it has many advantages such as high packing density and good adhesion to metallic substrates. In this study, the influence of deposition temperature as a key process parameter on film growth behavior and mechanical properties of Cr-Al-N coatings were systematically investigated and correlated with microstructural changes. From various analyses, the Cr-Al-N coatings prepared at deposition temperature of 450℃ in the CAE process showed excellent mechanical properties with higher deposition rate. The Cr-Al-N coatings with deposition temperature around 450℃ exhibited the highest hardness of about 35 GPa and elastic modulus of 442 GPa. The resistance to elastic strain to failure (H/E ratio) and the index of plastic deformation (H³/E² ratio) were also good values of 0.079 and 0.221 GPa, respectively, at the deposition temperature of 450℃. Based on the XRD, SEM and TEM analyses, the Cr-Al-N coatings exhibited a dense columnar structure with f.c.c. (Cr,Al)N multi-oriented phases in which crystallites showed irregular shapes (50~100nm in size) with many edge dislocations and lattice mismatches.

• International Journal of Advanced Culture Technology
• /
• 제9권4호
• /
• pp.288-294
• /
• 2021

There are various ways to be infected with malicious code due to the increase in Internet use, such as the web, affiliate programs, P2P, illegal software, DNS alteration of routers, word processor vulnerabilities, spam mail, and storage media. In addition, malicious codes are produced more easily than before through automatic generation programs due to evasion technology according to the advancement of production technology. In the past, the propagation speed of malicious code was slow, the infection route was limited, and the propagation technology had a simple structure, so there was enough time to study countermeasures. However, current malicious codes have become very intelligent by absorbing technologies such as concealment technology and self-transformation, causing problems such as distributed denial of service attacks (DDoS), spam sending and personal information theft. The existing malware detection technique, which is a signature detection technique, cannot respond when it encounters a malicious code whose attack pattern has been changed or a new type of malicious code. In addition, it is difficult to perform static analysis on malicious code to which code obfuscation, encryption, and packing techniques are applied to make malicious code analysis difficult. Therefore, in this paper, a method to detect malicious code through dynamic analysis and static analysis using Trojan-type Downloader/Dropper malicious code was showed, and suggested to malicious code detection and countermeasures.

• Applied Microscopy
• /
• 제50권
• /
• pp.7.1-7.10
• /
• 2020

Tantalum nitride (TaN_x) thin films were grown utilizing an inductively coupled plasma (ICP) assisted direct current (DC) sputtering, and 20-100% improved microhardness values were obtained. The detailed microstructural changes of the TaN_x films were characterized utilizing transmission electron microscopy (TEM), as a function of nitrogen gas fraction and ICP power. As nitrogen gas fraction increases from 0.05 to 0.15, the TaN_x phase evolves from body-centered-cubic (b.c.c.) TaN_0.1, to face-centered-cubic (f.c.c.) δ-TaN, to hexagonal-close-packing (h.c.p.) ε-TaN phase. By increasing ICP power from 100 W to 400 W, the f.c.c. δ- TaN phase becomes the main phase in all nitrogen fractions investigated. The higher ICP power enhances the mobility of Ta and N ions, which stabilizes the δ-TaN phase like a high-temperature regime and removes the micro-voids between the columnar grains in the TaN_x film. The dense δ-TaN structure with reduced columnar grains and micro-voids increases the strength of the TaN_x film.

• Bulletin of the Korean Chemical Society
• /
• 제29권10호
• /
• pp.1993-1997
• /
• 2008

In the present work, Diels-Alder reaction of cyclopentadiene with ethylacrylate has been carried out by using two types of mesoporous solid acid catalysts (Al-MCM-41, Al-MCM-48) with different pore structures. The specific topology of Al-MCM-48 (cubic Ia3d structure composed of two independent 3-D channel systems) exhibit higher activity and stereo-control than those of Al-MCM-41 (hexagonal packing of 1-D channels). The physical properties of Al-MCM-48 catalyst, such as high accessibility of reactants to the acid sites, spatial confinement in the nanoscopic reactors, and 3-D channel network structure that are effective adsorption and diffusion of reactants, play a crucial role in the present study.

• 한국결정학회지
• /
• 제2권2호
• /
• pp.7-12
• /
• 1991

C13H18N2O3(Mr=250.29)는 단사정계의 P211a의 공간군을 갖고 있으며 a=8.765(4), b=17.679 (3), c=9.238(4)A, p=105.6(3)A, z=4, V= 1378.53A3, A(Mo Ka)=0.71069A, 1:0. 81cm-1, F(000)=536, T=298 이며 1.0 σ(I)보다 큰 강도를 가진 1783개의 회절반점에 대하여 최종 R값은 0.080이다. 직접법에 의하여 구조를 풀었으며 C-H 결합길이와 메칠기는 길이를 고정시켜 이 상적인 기하학적 구조에 맞추어 계단식 대각최소자 승법에 의하여 정밀화하였다 두 에토오키시기중의 하나는 다른 기에 비해 100°나 더 기울어져있다. 결정격자내에 한개의 N-H‥‥0(2.798A) 수소결합이 있어 두 분자를 연결하면서 b-축에 따라 쌓여져 있다.

• Progress in Superconductivity
• /
• 제5권2호
• /
• pp.124-127
• /
• 2004

Many of research efforts have been focused on the improvement of critical current density (Jc) of silver-sheathed Bi-2223 tapes far practical applications. In this study, the transformation of Bi-2212 phase was investigated, which was transformed to orthorhombic from tetragonal through pre-annealing during powder packing and drawing process. The relationship between hardness of Bi-2212 orthorhombic phase and workability of Bi-2223/Ag tape was investigated. Bi-2223 superconducting wires with 55 filaments were fabricated by stacking and drawing process with different heat-treatment histories. Before rolling process, round wires were pre-annealing at 76$0^{\circ}C$ and in a low oxygen partial pressure. We confirmed that pre-annealing step was to transform to Bi-2212 orthorhombic structure from Bi-2212 tetragonal structure and to reduce the formation of second phases. However the breakages were created at Ag-alloy clad during rolling for pre-annealed Bi-22231Ag tapes. Several pre-annealing scenarios were introduced to reduce the breakages during rolling process. Microstructure and critical current density of pre-annealed Bi-2223 superconducting tapes were investigated. We could achieve proper pre-annealing conditions for Ag-alloy clad Bi-2223 superconducting tapes.

• 폴리머
• /
• 제27권6호
• /
• pp.528-535
• /
• 2003

불소계 섬유용 발수$.$발유제의 제조에 일반적으로 쓰이는 과불소알킬아크릴레이트 및 노말알킬아크릴레이트의 공중합체를 유화 중합법으로 제조할 시 계면활성제, 유기용매, 내구성 향상 목적으로 소량 첨가되는 기능성 단량체 및 공중합체의 결정 용융 온도 (T$_{m}$ )변화에 따른 고분자 라텍스의 입자 직경 변화와 그들의 표면 특성 (접촉각 및 발수도)의 변화를 관찰하였다 또한 WAXD 실험을 통해 공중합체의 T$_{m}$ 의 변화에 따른 공중합체의 곁사슬의 채움구조 변화를 조사하였으며 이를 통해 표면 특성과의 관계를 연구하였다. 그리고 과불소알킬아크릴레이트와 더불어 말단기가 약간 다른 불소아크릴레이트, [CH$_2$= CH$CO_2$CH$_2$(CF$_2$CF$_2$)nH] (n=4,5,6)를 사용한 불소아크릴레이트 공중합체도 동시에 합성하여 공중합체의 곁사슬의 채움구조, 말단기($CH_3$-,CF$_3$-,CHIF$_2$-)의 종류 및 농도변화에 따른 표면 특성 (접촉각, 발수도 등)의 변화를 관찰하였다.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.533-544
• /
• 2016

This paper provides a reference to determine the seal performance of metallic O-rings for a reactor pressure vessel (RPV). A nonlinear elastic-plastic model of an O-ring was constructed by the finite element method to analyze its intrinsic properties. It is also validated by experiments on scaled samples. The effects of the compression ratio, the geometrical parameters of the O-ring, and the structure parameters of the groove on the flange are discussed in detail. The results showed that the numerical analysis of the O-ring agrees well with the experimental data, the compression ratio has an important role in the distribution and magnitude of contact stress, and a suitable gap between the sidewall and groove can improve the sealing capability of the O-ring. After the optimization of the sealing structure, some key parameters of the O-ring (i.e., compression ratio, cross-section diameter, wall thickness, sidewall gap) have been recommended for application in megakilowatt class nuclear power plants. Furthermore, air tightness and thermal cycling tests were performed to verify the rationality of the finite element method and to reliably evaluate the sealing performance of a RPV.

• Bulletin of the Korean Chemical Society
• /
• 제18권1호
• /
• pp.14-18
• /
• 1997

Sulconazole nitrate, C18H16Cl3N3O3S, crystallizes in monoclinic, space group C2/c, with a=14.401(1), b=8.051(1), c=34.861(2) Å, β=95.9(1)°, g=0.58 mm-1, Dc=1.523 g/cm3, Dm=1.522 g/cm3, F(000)=1888.0, and z=8. Intensities for 2460 unique reflections were measured on a CAD4 diffractometer with graphited-monochromated Mo-Kα radiation. The structure was solved by direct method and refined by full matrix least squares to a final R=0.071 for 2182 reflections (Io > 2σIo). The bond lengths and angles are comparable with the values found in the analogues imidazole derivatives. The 2,4-dichlorophenyl ring(A) and the p-chlorophenyl ring(B) are almost planar with different heights [dihedral angle 17.3°] while the imidazole ring(C) is nearly perpendicular to the two phenyl rings[dihedral angles about the two rings A, B are 110.8° and 96.1° respectively]. In order to understand the overall conformation we calculated the selected distances (l1, l2, l3) among the center of the three rings and considered the imaginary plan D[C(7), C(9) and C(16)]. The two polar group S(8) and N(19) do not have gauche conformation and l2 value (4.47 Å) is shorter than the other imidazole derivatives. One -NO3 group are hydrogen bonded the two neighbored sulconazole molecules. The molecular crystal packing is also formed by two hydrogen bondings and van der Waals forces.

• 한국재료학회지
• /
• 제29권8호
• /
• pp.469-476
• /
• 2019

A lead-free bulk ceramic having a chemical formula $Ba_{0.8}Ca_{0.2}(Ti_{0.8}Zr_{0.1}Ce_{0.1})O_3$ (further termed as BCTZCO) is synthesized using mixed oxide route. The structural, dielectric, impedance, and conductivity properties, as well as the modulus of the synthesized sample are discussed in the present work. Analysis of X-ray diffraction data obtained at room temperature reveals the existence of some impurity phases. The natural surface morphology shows close packing of grains with few voids. Attempts have been made to study the (a) effect of microstructures containing grains, grain boundaries, and electrodes on impedance and capacitive characteristics, (b) relationship between properties and crystal structure, and (c) nature of the relaxation mechanism of the prepared samples. The relationship between the structure and physical properties is established. The frequency and temperature dependence of the dielectric properties reveal that this complex system has a high dielectric constant and low tangent loss. An analysis of impedance and related parameters illuminates the contributions of grains. The activation energy is determined for only the high temperature region in the temperature dependent AC conductivity graph. Deviation from the Debye behavior is seen in the Nyquist plot at different temperatures. The relaxation mechanism and the electrical transport properties in the sample are investigated with the help of various spectroscopic (i.e., dielectric, modulus, and impedance) techniques. This lead free sample will serve as a base for device engineering.