• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.97-103
• /
• 2010

In this paper, we present an efficient design scheme based on analysis of design requirements and considerations of baseband packet switch for S-band satellite/terrestrial hybrid multi-beam satellite communication systems. To establish design requirements and considerations, we analyze required functions of baseband packet switch, specifications of multi-beam satellite communications, communication services and performance requirements. And also we analyze and compare conventional layer-2 and layer-3 satellite baseband packet switching techniques, packet switching protocols and packet switch architectures, to apply from analyzed results. Finally, we propose a hardware design scheme of MPEG based layer-2 baseband packet switch using analyzed results.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1086-1089
• /
• 2002

In this paper, an adaptive packet acquisition performance of a CDMA/TDD packet radio system is analyzed and simulated in a frequency-selective Rayleigh fading channel. The frequency-selective fading process is assumed to be WSSUS model which is typical for a satellite and a mobile radio communications. The performance is evaluated in terms of packet error probability. In this adaptive packet acquisition scheme, an auxiliary training sequence is placed within data packet to estimate time-varying channel state. From the simulation results, it is confirmed that the proposed acquisition scheme significantly improves packet error performance compared to the conventional fixed acquisition scheme, especially, for the case of low Doppler frequency. The analysis in this paper can be applied to the design of a CDMA/TDD packet radio system.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.29-32
• /
• 2001

This paper has simulated the PER(Packet Error Rate), ratio of received packet and payload BER of Bluetooth system with packet types of ACL(Asynchronous Connection Less) and SCO(Synchronous Connection Oriented) link over wireless Ad-hoc environment. AWGN(Additive White Gaussian Noise) and Rayleigh fading are considered as channel model, and the analysis is based on the baseband model of Bluetooth system. In terms of PER and ratio of received packet, performance of DM1 packet is almost same as those of HV1, HV2 and HV3 packets, the performances of the other packets depend on the packet types. In terms of payload BER performance, there is no difference among HV2 packet of SCO link and DM1, DM3, DM5 packets of ACL link. Moreover, there is no difference among HV3 packet of SCO link and DM1, DM3, DM5 packets of ACL link, too.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.57-62
• /
• 2007

A modeling method for the modal and the transient vibration analysis of a multi-packet blade system excited by nozzle jet forces is presented in this paper. Blades are idealized as cantilever beams and the elastic structures like disc and shroud connecting blades are modeled as coupling stiffnesses. A modified Campbell diagram is proposed to identify true resonance frequencies of the multi-packet blade system. Different from the SAFE diagram that employs three dimensional space, the modified Campbell diagram proposed in this study employs a plane to find the true resonance frequencies. To verify the existence of true resonance frequencies, nozzle jet forces are modeled as periodic forces and transient vibration analysis were performed with the modeling method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.7
• /
• pp.711-717
• /
• 2008

A modeling method for the modal and the transient vibration analysis of a multi-packet blade system excited by nozzle jet forces is presented in this paper. Blades are idealized as cantilever beams and the elastic structures like disc and shroud connecting blades are modeled as coupling stiffnesses. A modified Campbell diagram is proposed to identify true resonance frequencies of the multi-packet blade system. Different from the SAFE diagram that employs three dimensional space, the modified Campbell diagram Proposed in this study employs a plane to find the true resonance frequencies. To verify the existence of true resonance frequencies, nozzle jet forces are modeled as periodic forces and transient vibration analysis were performed with the modeling method.

• Journal of Communications and Networks
• /
• v.7 no.1
• /
• pp.36-44
• /
• 2005

In this paper, we present a retransmission power adjustment (RPA) scheme for DS/SSMA ALOHA packet radio systems with packet combining. In the proposed RPA scheme, retransmission power is adjusted in such a way that the erroneously-received packet can be recovered with a minimized interference to other user packets. We analyze the performance of the system with the RPA by employing the equilibrium point analysis (EPA), and confirm that the results obtained from the EPA are very close to the simulation results in low power cases. Simulation results demonstrate that the RPA scheme brings forth performance gain in the throughput and the average delay while saving a significant amount of transmission power. We also investigate the stability of the system from the EPA results, and conclude that the system becomes stable as the offered load increases or the level of retransmission power decreases.

• Journal of applied mathematics & informatics
• /
• v.22 no.1_2
• /
• pp.501-515
• /
• 2006

The IEEE 802.11 protocol is the most mature technology for WLANs(Wireless Local Area Networks). However, as the number of stations increases, the delay and throughput performance of IEEE 802.11 MAC(Medium Access Control) degrades severely. In this paper, we present the comprehensive performance analysis of IEEE 802.11 MAC protocol by investigating the MAC layer packet service time when arrival packet sizes have a general probability distribution. We obtain the discrete probability distribution of the MAC layer service time. By using this, we analyze the system throughput and the MAC layer packet service time of IEEE 802.11 MAC protocol in wireless LAN environment. We take some numerical examples for the system throughput and the mean packet service time for several special distributions of arrival packet sizes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.393-399
• /
• 2008

A modeling method for the modal analysis of a pre-twisted multi-packet blade system undergoing rotational motion is presented in this paper. Blades are idealized as pre-twisted cantilever beams that are fixed to a rotating disc. The stiffness coupling effects between blades due to the flexibilities of the disc and the shroud are modeled with discrete springs. The coupling effect between chordwise and flapwise bending deflection is also considered. Hybrid deformation variables are employed to derive the equations of motion. To obtain more general information, the equations of motion are transformed into dimensionless forms in which dimensionless parameters are identified. The effects of the dimensionless parameters and the number of packets as well as blades on the modal characteristics of the rotating multi-packet pre-twisted blade system are investigated with some numerical examples.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.187-194
• /
• 2004

We propose priority-based reservation code multiple access (P-RCMA) which can enhance voice traffic quality of the previous RCMA. The proposed protocol maintains two power levels and consider traffic characteristics in contending shared available codes to transmit packets. P-RCMA gives priority to the voice request packets rather than data packets by capture effect at the receiver part of base station. We show numerical results from EPA (equilibrium point analysis) analysis and simulation study in terms of voice packet dropping probability and average data packet transmission delay.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.2
• /
• pp.139-146
• /
• 2002

The third generation mobile communication needs to provide multimedia service with increased data rates. Thus an efficient allocation of radio and network resources is very important. This paper models the 'burst switching' as an efficient radio resource allocation scheme and the performance is compared to the circuit and packet switching. In burst switching, radio resource is allocated to a call for the duration of data bursts rather than an entire session or a single packet as in the case of circuit and packet switching. After a stream of data burst, if a packet does not arrive during timer2 value ($\tau_{2}$), the channel of physical layer is released and the call stays in suspended state. Again if a packet does not arrive for timerl value ($\tau_{1}$) in the suspended state, the upper layer is also released. Thus the two timer values to minimize the sum of access delay and queuing delay need to be determined. In this paper, we focus on the decision of $\tau_{2}$ which minimizes the access and queueing delay with the assumption that traffic arrivals follow Poison process. The simulation, however, is performed with Pareto distribution which well describes the bursty traffic. The computational results show that the delay and the packet loss probability by the burst switching is dramatically reduced compared to the packet switching.