• Journal of Industrial Technology
• /
• v.6
• /
• pp.19-31
• /
• 1986

The residence time distribution of liquid flow in a 4.0cm diameter column packed with porous $Al_2O_3$ spheres of 0.37cm diameter were measured with pulse injections of a tracer under cocurrent trickling flow conditions. The mean residence time of liquid flow and liquid hold-up calculated by the transient curve of tracer were unaffected by gas flow rates under experimental ranges of liquid flow rates from 2.4 to $4.5(kg/m^2\;sec)$ and gas flow rates from 0 to $0.13(kg/m^2\;sec)$. The axial dispersion coefficient of liquid stream and apparent diffusivity of tracer in a micropore of solid particle were estimated from the response curve of tracer. The calculated Peclet No. were increased in ranges of 68-to 82 with a increasing of liquid mass velocity, and the external effective contacting efficiency between liquid and solid which can be expressed. by $(D_i)_{app}/D_i$ varied in ranges of 0.54 to 0.68 depending on the liquid flow rates. The gas to liquid(water) volumetric mass transfer coefficient were determined from desorption experiments with oxygen at $25^{\circ}C$ and 1 atm. The measured mass transfer coefficients were increased with liquid flow rates and the effect of gas flow rates on the mass transfer coefficient was insignificant.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.689-694
• /
• 2006

The system performance of a bioactive foam reactor (BFR), that consists of a foam column using a surfactant and a biodegradation basin containing suspended bacteria, was investigated for the treatment of gaseous toluene or a mixture of four volatile organic compounds (VOCs, benzene, toluene, p-xylene, and styrene). Overall, the BFR achieved stable VOC removal efficiencies, indicating that it can be used as a potential alternative over conventional packed-bed biofilters. Furthermore, a dynamic loading test showed that relatively constant removal was maintained at the elevated loading due to a high mass transfer rate in the foam column. However, as the inlet concentration of VOCs increased, a portion of the VOCs mass-transferred to the liquid phase was stripped out from the biodegradation basin, resulting in a decrease in the overall removal efficiency. In the BFR, the removal efficiency of the individual VOC was mainly determined depending on the biodegradation rate (styrene > toluene > benzene > p-xylene), rather than the mass transfer rate. Consequently, increases in the microbial activity and the volume of the basin could improve the overall performance of the BFR system. Further investigation on microbial activity and community dynamics is required for the BFR when subjected to high loadings of VOC mixtures.

• Microbiology and Biotechnology Letters
• /
• v.15 no.6
• /
• pp.430-435
• /
• 1987

A chitin-immobilized enzyme amyloglucosidase(AMG) and a bacterium Zymomonas mobilis were coentrapped in alginate gel beads. Ethanol production was performed in a packed bed column reactor in a simultaneous saccharification and fermentation(SSF) mode using liquefied sago starch as a substrate. It was found that this process eliminated product inhibition and reverse reaction of glucose enhancing the rate of saccharification and ethanol production. At a low dilution rate of D = 0.11 hr$^{-1}$, the steady-state ethanol concentration was 46.0g/$m\ell$ (96.8 % of theoretical yield). The maximum ethanol productivity was 17.7g/$m\ell$, h at D = 0.83 hr$^{-1}$ when the calculation was based on the total working volume. The continuous production of ethanol was maintained stably over 40 days without problems in this reactor system.

• KSBB Journal
• /
• v.22 no.4
• /
• pp.191-196
• /
• 2007

This study used biofilm process, which needs simple operation, maintenance and smaller facility area than conventional activated sludge process with the small plant operation, in the treatment of increasing sewage with the rapid industrial growth. The reactor used in this study consists of one anaerobic and one aerobic chamber filled with waste ceramic and waste vinyl as media and the treated sewage was from restaurant source. The experiment was scaled up from lab. to pilot scale and lasted for about 100 days. We focused on the removal efficiency of organics, nitrogen and phosphorus with constant HRT and continuous aeration. The removal efficiency of $BOD_5$ and SS were 94.33% and 87.77% respectively, which was a satisfaction level. However the removal efficiency of $COD_{Cr}$ was 81.46% somewhat below the desired level of 90%, and that of T-N and T-P showed 71.92% and 21.10% respectively, that was below the expected value. The removal efficiency of $COD_{Cr}$ and T-N in the pilot scale was about 10% low compared with the lab.-scale.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.6
• /
• pp.964-972
• /
• 2001

The kinetics of copper ion biosorption by Pseudomonas stutzeri cells immobilized in alginate was investigated. During the first few minutes of the metal uptake, the copper biosorption was rapid and then became progressively slower until an equilibium was rapid, and then became progressively slower until an equilibrium was reached. At a biomass concentration of 100g/l, the copper biosorption reaction reached approximately 90% of the equilibrium position within 30 min. A Freundich-type adsorption isotherm model was constructed based on kinetics with different amounts of biomass. When using this model, the experimental values only agreed well with the predicted values in a solution containing less than 200 mg/l Cu(II). Desorption of the bound copper ions was achieved using electrolytic solutions of HCl, $H_2SO_4$, EDTA, and NTA (0.1 or 0.5 M). Metal desorption with 0.1 M NTA allowed the reuse of the biosorbent for at least ten consecutive biosorption/desorption cycles, without an apparent decrease in its metal biosorption capability. A packed-bed column reactor of the immobilized biomass removed approximately 95% of the metal in the first 30 liter of wastewater [containing 100 mg/l Cu(II)] delivered at a rate of 20 L/day, and, thereafter, the rate gradually decreased.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.797-802
• /
• 2003

Structured lipids (SL) were synthesized by esterification of corn oil and conjugated linoleic acid (CLA) in a continuous packed-bed column reactor. The effects of flow rate, reaction temperature, and substrate molar ratios were studied. The reaction was catalyzed by TL IM (immobilized lipase from Thermomyces lanuginosa). Results of triacylglycerol (TAG) analysis by GC showed that the incorporated CLA isomers were mainly cis9, trans11- and trans 10, cis12-CLA. Slower flow rates yielded higher incorporation, and maximum incorporation of CLA was obtained with a molar ratio of 1:3 (corn oil: CLA) at a temperature of $55^{\circ}C$. The obtained SLs had iodine values ranging from 120 to 128. The SLs were composed of TAG $(98{\sim}99%)$, 1,2- and 1,3-diacylglycerol ($0.7{\sim}1.3%$), and a small amount of monoacylglycerol.