• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.42-42
• /
• 2008

Considerable attention has been focused on the applications of flexible liquid crystal (LC)-based displays because of their many potential advantages, such as portability, durability, light weight, thin packaging, flexibility, and low power consumption. To develop flexible LCDs that are capable of delivering high-quality moving images, like conventional glass-substrate LCDs, the LC device structure must have a stable alignment layer of LC molecules, concurrently support uniform cell gaps, and tightly bind two flexible substrates under external tension. However, stable LC molecular alignment has not been achieved because of the layerless LC alignment, and consequently high-quality images cannot be guaranteed. To solve these critical problems, we have proposed a PDMS pixel-wall based bonding method via the IB irradiation was developed for fasten the two substrates together strongly and maintain uniform cell gaps. The effect of the IB irradiation on PDMS with PI surface was also evaluated by side structure configuration and a result of x-ray photoelectron spectroscopic analysis of PDMS interlayer as a function of binder with substrates. large number of PDMS pixel-walls are tightly fastened to the surface of each flexible substrate and could maintain a constant cell gap between the LC molecules without using any other epoxy or polymer. To enhance the electro-optical performance of the LC device, we applied an alignment method that creates pretilt angle on the PI surface via ion beam irradiation. Using this approach, our flexible LCDs have a contrast ratio of 132:1 and a response time of about 15 ms, resulting in highly reliable electro-optical performance in the bent state, comparable to that of glass-substrate LCDs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.1092-1095
• /
• 2001

Steady state thermal analysis has been done by a finite element method in a diode of 12kV blocking voltage. The diode was fabricated by soldering ten pieces of 1200V diodes in series, capping a dummy wafer at the far end of diode series, and finally wire bonded for building anode and cathode terminal. In order to achieve high voltage and reliability, the edge of each diode was beveled and passivated by resin with a thickness of 25${\mu}$m. It was assumed that the generated heat which is mainly by the on-state voltage drop, 9V for 12kV diode, is dissipated by way of the conduction through diodes layers to bonding wire and of the convection at the surface of passivating resin. It was predicted by the thermal analysis that the temperature rise of a pn junction of the 12kV diode can reach at the range of 16∼34$^{\circ}C$ under the given boundary conditions. The thickness and thermal conductivity(0.3∼3W/m-K) of the passivating resin did little effect to lower thermal resistance of the diode. As the length of the bonding wire increased, which means the distance of heat conduction path became longer, the thermal resistance increased considerably. The thermal analysis results imply that the generated heat of the diode is dissipated mainly by the conduction through the route of diode-dummy wafer-bonding wire, which suggests to minimize the length of the wire for the lowest thermal resistance.

• Journal of Environmental Health Sciences
• /
• v.29 no.4
• /
• pp.27-34
• /
• 2003

Bisphenol A is used in the manufacture of epoxy, polycarbonate, and corrosion-resistant unsaturated polyester-styrene resins required for food packaging materials in industrial processing. Some reports indicated the possibility of harmful effects on rats. In this study was used a method for the determination of bisphenol A in blood according to the OSHA High Performance Liquid Chromatography (HPLC) guideline. The method involved blood extraction using methylene chloride. And it was evaluated developmental and teratogenic effects in pregnant rats and second generation. The results obtained were as follows. There was a significant increase in the body weights and treated groups F1 female in liver, spleen, kidney, but according to dose-response. F1 female rat's relative body weight and absolute body weight are not different. There was a significant increase liver, spleen, kidney organ weight and reproductive organ weight epididymis, prostate gland in F1 male rats. There was a proestrous in pregnant rat, group 200 $\mu\textrm{g}$/kg, 2000 $\mu\textrm{g}$/kg, 20,000 $\mu\textrm{g}$/kg. The effect on rat treated with bisphenol A decrease organ weight and reproductive organ weight. Identification and quantitation were performed with using HPLC C18 column and using at retention time 5.5 min. The results of the detection of bisphenol A were at 20,000 $\mu\textrm{g}$/kg in average 1 $\mu\textrm{g}$/ml, 200 $\mu\textrm{g}$/kg average in 0.9 $\mu\textrm{g}$/ml blood samples. From those results, it could be concluded that the effects of pregnant rat and second generation(F1) by bisphenol A treatment during lactational period were estrogenic and bisphenol A was remained in serum at low level.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.9
• /
• pp.901-908
• /
• 2013

The introduction of industrial intelligent robot using vision sensor has been interested in automated factory. 2D and 3D vision sensors have used to recognize object and to estimate object pose, which is for packaging parts onto a complete whole. But it is not trivial task due to illumination and various types of objects. Object image has distorted due to illumination that has caused low reliability in recognition. In this paper, recognition method of complex shape object has been proposed. An accurate object region has detected from combined binary image, which has achieved using DoG filter and local adaptive binarization. The object has recognized using neural network, which is trained with sub-divided object class according to object type and rotation angle. Predefined shape model of object and maximal slope have used to estimate the pose of object. The performance has evaluated on ETRI database and recognition rate of 96% has obtained.

• Korean Journal of Optics and Photonics
• /
• v.23 no.5
• /
• pp.217-221
• /
• 2012

In this paper, we have fabricated by means of the "Micro-Block Stacking (MBS)" method the 8 pin mini DIL integrated Triplexer, which can transmit CATV and voice/data at the same time in a single fiber. Our MBS technique is a novel scheme of compact optical module packaging which secures precision positioning of the components on the optical beam path by prefixed stacks of ceramic blocks. The subassembly in which a laser diode, two receiver photodiodes, two WDM filters, and four micro lenses are integrated is only $5.40mm{\times}2.15mm{\times}1.05mm$ in size. As the Triplexer is aligned to the single mode fiber, the transmitter power of -14.5 dBm and the receiver sensitivities of 0.83 A/W, 0.73 A/W for 1550 nm, 1490 nm, respectively are obtained.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.5
• /
• pp.470-477
• /
• 2011

This study reviewed the effect of the drying conditions on the production of biogenic amines and lipid oxidation in semi-dried Pacific saury Cololabis saira or Guamegi. The moisture content of the Guamegi ranged from $32.71{\pm}2.37$ to $45.9{\pm}2.60$ g/100 g. The respective ranges of the acid value (AV) and peroxide value (POV) were $1.39{\pm}0.40$ to $15.79{\pm}0.47$ mg KOH/g and $76.14{\pm}2.19$ to $282.84{\pm}2.34$ meq/kg on drying for 3 days. The AV and POV increased for up to 3 days of drying and the values differed according to the amount of sunlight and temperature. However, lipid oxidation was reduced in Guamegi manufactured using a cold-air drying method. The fatty acid composition and the biogenic amine content in Guamegi during drying did not differ significantly with the drying method or drying date. The main saturated, monoene and polyene fatty acids were palmitic acid, eicosenoic & erucic acids, and eicosapentaenoic & docosahexaenoic acids, respectively. At 16.67 to 71.89 mg/kg, the histamine content was higher than that of other biogenic amines and it increased significantly during drying. In conclusion, this study showed that the packaging and drying conditions of Guamegi products need to be improved to inhibit lipid oxidation and biogenic amine formation.

• The Journal of the Korea Contents Association
• /
• v.8 no.11
• /
• pp.154-161
• /
• 2008

Rapidly changing 3D rendering technology is expanding its fields of display fast towards Non-Photorealistic Rendering beyond Photorealistic Rendering. It is now attainable to realize conventional 2D visual animated cartoons with 3D animation technology. It is not complex to create two shades of color or more with the rendered outcomes, made by Toon-Shading, of 3D total packaging animation Maya with black outlines brought through the process of 2D animation. It the reality of 3D animation being one of the prevalent mechanisms of animated films, it is valuable for familiarized animated cartoons to be realized by the technology of 3D animation. Thus, I hope to help in many ways create more effective 3D cartoon animation production process by optimized Toon-Shading attributes method and technology in this research.

• Korean journal of food and cookery science
• /
• v.32 no.6
• /
• pp.665-676
• /
• 2016

Purpose: This study was conducted to find the optimal freezing method and storage conditions for welsh onion. Methods: Cut welsh onions (0.3 cm) were packed in nylon/linear low density polyethylene (LLDPE) film bags, and frozen utilizing still-air freezing at -$20^{\circ}C$ (SAF20) and -$40^{\circ}C$ (SAF40), and immersed-liquid freezing at -$40^{\circ}C$ (ILF40); they were then stored at -$20^{\circ}C$ for 7 months. During storage, quality characteristics were measured monthly. Results: Drip loss was the lowest in the ILF40 packaging. Color difference in the stem (white part) did not differ significantly according to freezing conditions and storage time. Color difference in the leaf (green part) and stem was the lowest in SAF20. pH remained unchanged, while total aerobic bacterial count, pyruvic acid and moisture content decreased during storage. Pyruvic acid content of ILF40 was the highest among the freezing treatments. Fructose and glucose contents increased gradually during storage. Citric acid, malic acid, succinic acid and fumaric acid contents were unaffected, regardless of the freezing conditions. Conclusion: The optimal freezing method for welsh onions with the least quality changes was determined to be immersed liquid freezing, following by preservation up to 7 months by freeze-storing.

• Journal of Plant Biotechnology
• /
• v.30 no.4
• /
• pp.369-373
• /
• 2003

In spite of potential benefits of anther culture, low productivity of plant regeneration in some genotypes; e.g. tonsil and indica rice, is one of the major obstacles for practical use of anther culture. This study was conducted to improve cold shock method and carbohydrate source for increasing the efficiency of anther culture in rice. The most common carbon source, sucrose was replaced to maltose, which has two molecules of glucose. Maltose increased callus induction 1.4-to 1.8-fold higher in japonica rice, 3.2-to 11.6-fold in tongil types and 2.7-fold in indica rice IR50. Callus induction was increased from 0.2％ to 12.5％ in maltose medium compared to the medium supplemented with sucrose plus glucose in indica rice "Tetep". A simple procedure of vacuum packaging of panicles during cold shock treatment prolonged not only anther viability more than 15 days but also increased callus induction more than 2-fold compared to open-air storage (conventional method). Combining of above two methods, callus induction was increased 28 to 56％ in japonica, 13 to 33％ in tonsil type and 12 to 31％ in indica rice. Plant regeneration was increased 14 to 35％ in japonica, 10 to 20％ in tonsil and 4 to 15％ in indica rice, respectively.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.175-181
• /
• 2012

This example was able to focus on the long usage of the pavement that it was merely through the oxidation of the asphalt pavement which it could contact with on the road in the industrial housing complex and correlation regulation of the asphalt subsidence with the load in basic Infra of the configuration. The problem in conjunction with the subsidence (transformation) was interpreted as a problem of the subsidence of each pavement layer to lead the subsidence of the road or the transformation to packaging side asphalt pavement, but the traffic number of times of the heavy vehicle highlights for main problems with the road where is concentrated. In the case of general asphalt paving, it thinks it exposes light, and to study a general phenomenon for the asphalt transformation and a cause for a pavement construction method and the property of material used for pavement and a complement method by the case study at this time of the compound with the heavy vehicle traffic that it can become clear that small success transformation occurs at a point in time when 1-2 years more pass, and a fatigue rift occurs by ultraviolet rays, the oxidation with the contact with the air afterwards, and described beginning to use by the above.