• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2014

Ceria ($CeO_2$) was used to scavenge free radicals which attack the membrane in the polymer electrolyte membrane water electrolysis (PEMWE) circumstance and to increase the duration of the membrane. In order to improve the electrochemical, mechanical and electrocatalytic characteristics, engineering plastic of the sulfonated polyether ether ketone (SPEEK) as polymer matrix was prepared in the sulfonation reaction of polyether ether ketone (PEEK) and the organic-inorganic blended composite membranes were prepared by sol-gel casting method with loading the highly dispersed ceria and cesium-substituted phophomolybdic acid(Cs-MoPA) with cross-linking agent contents of 0.01mL. In conclusion, CL-SPEEK/$Cs_{(2.5)}$-MoPA/ceria(1%) membrane showed the optimum results such as 0.1095S/cm of proton conductivity at $80^{\circ}C$, 2.906meq./g-dry-membrane of ion exchange capacity and mechanical characteristics, and 49.73MPa of tensile strength which were better than Nafion 117 membrane.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.3
• /
• pp.45-50
• /
• 2018

From the flow analysis of the silencer for 8 kW diesel generators, the following results were obtained. For silencer-1, it was confirmed that the holes formed at the inlet-side portion connect into the exhaust pipe in the chamber. The exhaust pipe installed inside silencer-1 was integrally connected through the holes in the chamber. As a result, it was confirmed that the pressure inside the chamber was kept stable. It was confirmed that the pressure loss generated inside an absorptive type silencer such as silencer-2 was small. The differential pressure of the inlet-outlet of silencer-1 and silencer-2 was confirmed to be 494 Pa at 15 m/s, 859 Pa at 20 m/s, 1326 Pa at 25 m/s, and 1911 Pa at 30 m/s.

• Anxiety and mood
• /
• v.2 no.2
• /
• pp.122-127
• /
• 2006

Objective : We examined the putative association between the psychological symptoms and hypoxemia in hospitalized pneumoconiosis patients. Methods : One hundred and nine hospitalized pneumoconiosis patients were divided into two groups according to their level of hypoxemia (PaO2); hypoxemic group consisted of 47 patients with PaO2 lower than 80 mmHg, and comparative group consisted of 62 patients with higher than 80 mmHg. All of them were interviewed with the Hamilton Depression Rating Scale (HAM-D), and completed the Symptom Checklist-90items-Revised (SCL-90-R) and the State-Trait Anxiety Inventory (STAI). The medical data (PaO2, PaCO2, Hb, and Hct), number of hospital days and socio-demographic data as well as scores of the three psychological measurements were compared between the two groups. Results : Hypoxemic patients with lower PaO2 showed higher scores in the HAM-D (p=0.01) and stateanxiety subscale of the STAI (p<0.05). Values of hemoglobin and hematocrit were negatively correlated with levels of trait-anxiety (p<0.05). Thirty patients (27.5%) of total subjects suffered from depression (higher than 18 in the HAM-D), and 46.8% of hypoxemic patients were depressed, whereas 12.9% of comparative group patients were depressed (p=0.01). Conclusion : These results suggest that depression and anxiety might be associated with the hypoxemic mechanism in pneumoconiosis patients.

• Journal of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.51-62
• /
• 1990

Pentadentate Schiff base cobalt(II) complexes; Co(II)(Sal-DET) and Co(II)(Sal-DPT) were synthesized and these complexes were allowed to react with dry to form oxygen adducts of cobalt(II) complexes such as [Co(III)(Sal-DET)]$_2O_2$ and [Co(III)(DPT)]$_2O_2$ in aprotic solvents. These complexes have been identified by IR spectra, TGA, DSC, magnetic susceptibility measurements, and elemental analysis. It has been found that the oxygen adadduct complexes of $\mu$-peroxo type have hexaccordinated octahedral configuration with pentadentate schiff base cobalt(II) and oxygen, but the mole ratio of oxygen to cobalt(III) complexes of first step for oxygen adduct formation reaction of cobalt(II) complexes in aprotic solvents are 1:1. The redox reaction processes of Co(II)(Sal-DET), Co(II)(Sal-DPT), and oxygen adduct of cobalt(II) complexes were investigated by cyclic voltammetry and DPP method with glassy carbon electrode in 0.1M TEAP-DMSO and 0.1M TEAP-pyridine. As a result the reduction reaction processes of Co(III)/Co(II) and Co(II)/Co(I) for cobalt(II) complexes and oxygen adducts of cobalt(II) complexes are two irreversible steps of one eletron process, and reaction processes of oxygen for oxygen adducts complexes were quasireversible and redox range of potential was $E_{pc}$ = -0.97V∼-0.86V and $E_{pa}$ = -0.87V ∼ 0.64V.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.974-981
• /
• 1997

A combined treatment of high hydrostatic pressure and carbonation was used to inactivate pectinesterase (PE) and sterilize microorganisms in Valencia orange juice without major changes in its nutritive components. Quality characteristics of Valencia orange juice, such as microorganisms, PE activity, vitamin C content and color, were evaluated after it was treated with pressure, carbonation-and-pressure, and heat. Quality changes during storage at $4^{\circ}C$ and $30^{\circ}C$ after the treatments were also investigated. Pressurized orange juice (pressurized at 600 MPa for 10 min at $20^{\circ}C$) showed 7.0% residual PE activity, while the carbonated-and-pressurized orange juice (207 $kPa-CO_2$ gas pressure, pressurized at 600 MPa for 10 min at $20^{\circ}C$) showed 0%. Pressurization at 400 MPa or higher decreased the population of microorganisms in the orange juice to less than 10 CFU/mL. Carbonated-and-pressurized orange juice showed slight decrease in vitamin C content when stored at both $4^{\circ}C\;and\;30^{\circ}C$. While heat-treated ($90^{\circ}C$ for 60 sec) orange juice showed 75% decrease in vitamin C content when stored at $30^{\circ}C$. L value (lightness) and b value (yellowness) of carbonated-and-pressurized orange juice were higher than those of heat-treated orange juice when they were stored at $4^{\circ}C$ for 30 days.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.18 no.1
• /
• pp.18-25
• /
• 2020

Purpose: We studied the impact of arterial oxygen tension (PaO₂) on the long term neurologic outcome in patients with acute carbon monoxide poisoning. Methods: The study population included 311 patients who presented to emergency department with acute CO poisoning from January 2015 to January 2018. These patients underwent arterial blood gas testing at the time of presentation. The baseline demographic, clinical, laboratory, and clinical outcome data were recorded. The primary outcome of interest was the long term neurologic status. Results: The normoxia group was significantly older and it had a higher incidence of diffusion weighted MRI abnormality, and this group needed multiple HBO sessions compared to the group with moderate or severe hyperoxia. Also, the incidence of altered mentality at discharge was higher in the normoxia group than that of the moderate hyperoxia group. The incidence of a poor long term neurologic outcome was 11.3%. The incidence of a poor long term neurologic outcome decreased as the PaO₂ increased. The PaO₂ was significantly lower in patients with a poor long term neurologic outcome than that of the patients with a good outcome 198 (165.2 to 231.1) mmHg in the good outcome group vs. 154 (119-162) mmHg in poor outcome, p<0.001). In multivariate logistic regression analysis, PaO₂ was selected as an independent factor of the poor long-term neurologic outcome (OR 0.981 (95% CI: 0.968 to 0.995)) Conclusion: Higher PaO₂ was independently associated with a lower incidence of a poor long-term neurologic outcome.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.3
• /
• pp.378-384
• /
• 2007

Three microorganisms and one chemical preservative were tested for their effects on the fermentation and aerobic stability of whole-crop wheat, sorghum and maize silages. Wheat at the early dough stage, sorghum at the late milk stage and maize at the one-third milk line stage were harvested and ensiled in 1.5-l anaerobic jars untreated or after the following treatments: control (no additives); Lactobacillus plantarum (LP) at $1.0{\times}10^6$ colony-forming units (CFU)/g of fresh forage; L. buchneri (LB) at $1.0{\times}10^6$ CFU/g; Propionibacterium acidipropionici (PA) at $1.0{\times}10^6$ CFU/g; and a formic acid-based preservative (FAP) at 3 ml/kg of fresh forage weight. Three jars per treatment were sampled on d 90 after ensiling, for chemical and microbiological analysis. At the end of the ensiling period, 90 d, the silages were subjected to an aerobic stability test lasting 5 d. In this test, $CO_2$ produced during aerobic exposure was measured along with chemical and microbiological parameters which serve as spoilage indicators. The silages inoculated with LP had higher concentration of lactic acid compared with the controls and the other treated silages (p<0.05). The controls and LP-inoculated silages spoiled upon aerobic exposure faster than LB, PA and FAP-treated silages. The controls and LP-inoculated silages spoiled upon aerobic exposure faster than LB, PA and FAP-treated silages due to more $CO_2$ production (p<0.05) in these two groups and development of yeasts unlike the other groups. In the experiment, the silages treated with LB, PA and FAP were stable under aerobic conditions. However, the numbers of yeasts was higher in the LP-inoculated wheat, sorghum and maize silages compared with the LB, PA and FAP-treated silages. The LB, PA and FAP improved the aerobic stability of the silages by causing more extensive heterolactic fermentation that resulted in the silages with high levels of acetic and propionic acid. The use of LB, PA and FAP as silage additives can improve the aerobic stability of whole-crop wheat, sorghum and maize silages by inhibition of yeast activity.

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.201-213
• /
• 2017

Water is removed from crude oil containing water by using oil separator. This study aims to develop a three-dimensional (3D) Eulerian computational fluid dynamics (CFD) model to predict the separation efficiency of air-water-oil separator. In the incompressible, isothermal and unsteady-state CFD model, air is defined as continuous phase, and water and oil are given as dispersed phase. The momentum equation includes the drag force, lift force and resistance force of porous media. The standard k-${\varepsilon}$ model is used for turbulence flow. The exit pressures of water and oil play an important role in determining the liquid level of the oil separator. The exit pressures were identified to be 6.3 kPa and 5.1 kPa for water and oil, respectively, to keep a liquid level of 25 cm at a normal operating condition. The time evolution of volume fractions of air, water and oil was investigated. The settling velocities of water and oil along the longitudinal separator distance were analyzed, when the oil separator reached a steady-state. The oil separation efficiency obtained from the CFD model was 99.85%, which agreed well with experimental data. The relatively simple CFD model can be used for the modification of oil separator structure and finding optimal operating conditions.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.485-488
• /
• 2013

A SiC-$CeO_2$ composite membrane was successfully fabricated using an ally-hydridopolycarbosilane (AHPCS) binder and treated by dip-coating at 60 times with a $CeO_2$ sol solution. The dip-coated SiC membrane was calcined at 773 K and then sintered at 1173 K under an air atmosphere. The coated membrane was characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM) and a BET surface analysis. The difference in permeation performance between $H_2$ and CO gases was measured by varying the temperature. The permeation flux of $H_2$ on the SiC membrane with layered $CeO_2$ was obtained as $8.45{\times}10^{-6}\;mol/m^2sPa$ at room temperature. The CO permeation flux was $2.64{\times}10^{-6}\;mol/m^2sPa$ at room temperature. The reaction enthalpy (${\Delta}H^{\circ}$) for the hydrogen permeation process was calculated as -7.82 J/mol by Arrhenius plots.

• Elastomers and Composites
• /
• v.55 no.1
• /
• pp.1-5
• /
• 2020

This study examined the effects of the addition of maleic anhydride-grafted polypropylene (PP-g-MA) and polyolefin elastomer (POE) on polyamide 66 (PA66) and polypropylene (PP) blends. The blends of PA66/PP with PP-g-MA and POE were prepared using a twin screw extruder. Mechanical testing results revealed that the tensile, flexural, and izod impact strengths of the blends were maximized at a PP-g-MA content of 2 phr. The increased mechanical strength of the blends with PP-g-MA was attributed to the compatibilizing effect of the PA66 and PP blends. In addition, as the POE content increased, the impact strength of the blends increased. However, at a high POE content, the tensile and flexural strengths decreased, seemingly because of the lower mechanical properties of POE.