• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.251-252
• /
• 2007

In this paper, in order to spray diesel fuel, multilayer actuator structured-ultrasonic nozzle and resonant inverter were manufactured. Multilayer actuator structured-ultrasonic nozzle as fabricated using PMN-PNN-PZT ceramics showing excellent piezoelectric characteristics. Its electrical and temperature properties were measured for investigating he applicability of stable ultrasonic nozle for spraying diesel fuel.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.11
• /
• pp.953-958
• /
• 2007

In this paper, multilayer actuator structured-ultrasonic nozzle and resonant inverter driving circuit were manufactured, respectively. Its electrical properties were investigated. Multilayer actuator structured ultrasonic nozzle was fabricated using PMN-PNN-PZT ceramics showing excellent piezoelectric characteristics. In order to drive ultrasonic nozzle, resonant PWM inverter was used. The purpose of this study is to find the optimal driving condition of ultrasonic nozzle. Accordingly, electrical and temperature characteristic of multilayer ultrasonic driving system were investigated by experiments as a function of the series resonance inductance. The driving current of ultrasonic nozzle showed the maximum current of 27 mA. Also, the surface temperature of ceramic vibrator showed $44^{\circ}C$ at driving time for 20 min. The ultrasonic nozzle was stably operated in the case of driving for more than 20 min.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.254-256
• /
• 2007

In this study, in order to develop low temperature sintering ceramic ultrasonic nozzle, single-layer and multilayer ring-type piezoelectric vibrators were manufactured using PMN-PNN-PZT ceramics, And then the electrical properties were investigated. The piezoelectric vibrator were sintered at low temperature of $940^{\circ}C$. The resonant resistance decreased with the increases of the number of layer. And also, the capacitance increased with the increases of the number of layer. The mechanical quality factor (Qm) decreased with the increases of the number of layer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.7
• /
• pp.563-567
• /
• 2011

The most widely used piezoelectric ceramics are lead oxide based ferroelectrics (PZT). However, the toxicity of lead oxide and its high vapor pressure during processing have led to a demand for alternative lead-free piezoelectric materials. We synthesized Lead-free piezoelectric ceramics of $0.96(K_{0.5}Na_{0.5})NbO_3-0.04SrZrO_3+x$ mol% $ZrO_2$ [KNN-SZ+$xZrO_2$; x= 0~0.10] doped with 0.1 wt% $MnO_2$ by a conventional solid state method. We investigated the piezoelectric properties and microstructures of these disk samples sintered in reduced atmosphere in order to evaluate the possibility of the multilayered piezoelectric ceramics having the base metal such as Ni as a internal electrode. All of these KNN-SZ samples sintered in 3%$H_2-97%N_2$ atmosphere at $1,140^{\circ}C$ exhibit pure perovskite structure irrespective of the content of $ZrO_2$. Meanwhile, the sintering denisty and piezoelectric properties such as $K_p$, $Q_m$ and $d_{33}$ of KNN-SZ samples as a function of $ZrO_2$ content show the maxima ($k_p$=28.07%, $Q_m$= 101.34, $d_{33}$= 156 pC/N) at x= 0.04 and it is likely that there is some morphotropic phase boundary(MPB) in this KNN-SZ+$xZrO_2$ composition system. These results indicate that the ceramic composition is a promising candidate material for applications in lead free multilayer piezoelectric ceramics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.94-94
• /
• 2009

전기 에너지를 기계적 에너지 변환하고 또한, 기계적 에너지를 전기 에너지로 변환할 수 있는 압전 세라믹스는 압전 변압기 (piezoelectric transformer), 초음파모터, 센서등과 같은 응용분야에 넓게 사용되고 있다. 특히, 압전 변압기의 설계와 제조방법에 대해서는 이미 상당히 많은 연구가 수행되어 왔다. 특히, 전원장치에 있어서는 현재 주요부품으로 사용되고 있는 권선형 변압기와 같은 전자 변환기의 대체품으로서 누설손실이 없는 압전세라믹스 소재의 특성을 이용한 압전변압기의 개발과 응용연구가 국내외적으로 활발히 진행 중이다. 하지만 지금 까지 널리 사용된 PZT계 압전 세라믹스는 환경문제에 있어서 문제점을 가지고 있다. $1200^{\circ}C$ 이상에서 소결되는 PZT계열의 압전세라믹스 소재를 사용한 전자부품의 60~70%이상이 PbO로 구성되어 있기 때문에 $1000^{\circ}C$ 부근에서 급격한 휘발특성을 보이는 PbO로 인한 환경오염문제가 대두되고 있다. 압전변압기, 초음파모터등에 사용될 수 있는 무연계 압전재료 중에 PZT 압전소자의 기능을 대체할 만한 물질로는 높은 큐리온도와 우수한 압전특성을 보이는 $(Na,K)NbO_3$세라믹스가 가장 유력한 것으로 알려져 있다. 즉, 압전변압기용 조성 세라믹스는 높은 에너지 변환효율을 위해서 전기기계 결합계수($k_p$)가 커야 되며, 발열에 의한 온도 상승을 억제하기 위하여 기계적 품질계수($Q_m$)가 큰 것이 바람직하다. 또한, 높은 전류를 발생하기 위해서는 유전상수가 커, 압전변압기의 출력측 정전용량을 크게 하여야 한다. 본 연구에서는 무연계 압전세라믹스를 개발하고, 이를 이용한 전력밀도(power density)가 높은 무연계 압전변압기를 제작하여 그에 대한 전기적 특성을 조사하였다. 따라서 본 연구에서는 무연 압전변압기용 압전 세라믹스를 개발하기 위해 뛰어난 압전 및 유전특성을 가진 무연$(Na,K)NbO_3$계 세라믹스를 기본조성으로 하였고, KCN을 복합 첨가하여 볼 변화에 따른 미세구조, 압전 및 유전특성을 조사하고. 가장 우수한 조성으로 비납 압전변압기를 제작하여 전기적특성을 조사하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.4
• /
• pp.354-360
• /
• 2002

The piezoelectric composites had many advantages in comparison with conventional piezoelectric ceramics and piezopolymers for ultrasonic transducers used in NDT and in medical ultrasionic imaging. The electromechanical coupling coefficient should be high and the acoustic impedance should be low in these applications. However, the cross-coupling with spurious oscillations caused by laterally running plate waves exhibited complex motions in the surface of piezoelectric composites with coarse lateral spatial scale. The thickness mode electromechanical coupling coefficient of 1-3type of piezoelectric compoistes were 0.36 to 0.64, and the acoustic impedance of them were 9.8 to 22.7 MRayl. The lateral resonance frequency of 1-3 type piezoelectric composites shifted to high frequency region with decreasing lateral spatial scale.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1645-1652
• /
• 2013

In this paper, a new piezoelectric transducer for high performance ultrasonic flaw detector used in non-destructive test (NDT) is implemented. Here, the goals for some major characteristics such as piezoelectric strain constant and electro-mechanical coupling factor are fixed in advanced. Then, the parameters obtained by finite element analysis (FEA) are exploited to design and implement the piezoelectric transducer. As a result of experiments using manufactured samples, it is proved that the new PZT ceramics satisfy the goals very well. It has much improved impedance characteristic at the resonant frequency and generation of ultrasonic signals. In addition, ultrasonic flaw detector with the new transducer provides increased flaw detecting gain than the conventional one. Thus, it is considered that the new flaw detector contributes significantly to improve reliability of the NDT.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.27-28
• /
• 2005

본 연구에서는$Cr_2O_3$ 와 $Nb_2O_5$ 를 첨가한 $Pb(Zr_{0.54}Ti_{0.48})O_3$ 세라믹스에서 $Nb_2O_5$ 첨가량에 따른 소결 및 압전, 유전특성을 조사하였다. $Pb(Zr_{0.54}Ti_{0.48})O_3$ + 0.2 wt% $Cr_2O_3$ + wt% $Nb_2O_5$ ($0.{\sim}2wt.%$)의 첨가량에 따른 압전, 유전특성 및 미세구조에 관해 연구하였다. 본조성에서 $Nb_2O_5$ 첨가량이 증가함에 따라 입경의 크기는 증가하였으며, 0.5 wt% $Nb_2O_5$ 첨가조성에서 $4\sim5\mu m$의 최대 평균입경을 보이다가 그 이상의 첨가 조성에서 급격히 감소하였다. 유전상수와 kp 는 $Nb_2O_5$ 첨가량이 1.0 wt% 조성까지 증가하였다가 그 이상 조성에서 감소하였다. $Nb_2O_5$ 첨가량이 증가함에 따라 삼방정(rhombohedral)구조에서 정방정(tetragonal)구조로 상전이 일어났으며, 본 조성의 상경계 영역인 0.5 wt% 조성에서 $\varepsilon_r$ = 730, $k_p$ = 0.72, $d_{33}$ = 450, $g_{33}$ = 70의 우수한 압전 특성을 나타내었다. 이러한 조성은 접촉센서용 복합압전소재의 실용가능성을 제시하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.59-59
• /
• 2008

Pb(Zr,Ti)$O_3$(PZT)는 현재 가장 우수한 압전특성을 가진 압전 재료로써, 압전효과와 역압전효과를 이용한 압전 액추에이터, 압전 트랜스듀서, 센서, 레조네이터 등의 활동에 대한 연구과 활발하게 이루어 지고 있다. 그러나 압전성이 우수한 PZT 세라믹스들은 Pb 성분이 포함되어 있기 때문에 환경오염뿐 아니라, 경제적인 측면에서도 많은 문제점을 가지고 있어 최근에는 유해원소인 Pb를 포함하지 않는 친환경 압전 세라믹스에 관한 연구가 활발히 진행되고 있다. (Na, K)$NbO_3$은 뛰어난 특성을 가지고 있어 Pb를 기본조성으로 하는 압전세라믹스를 대체할 수 있는 대표적인 물질중의 하나로 알려져 있다. 그러나, potassium의 수분과의 반응성과, 소결시 휘발로 인해 높은 소결밀도의 NKN을 제조하기 어렵다. 이러한 단점을 보안하기 위해 Hot pressing, Hot forging, SPS 등 여러가지 방법을 이용하여 연구가 수행되고 있지만, 고가의 제조공정을 이용해야만 한다. 본 연구에서는 $BaSrTiO_3$의 새로운 고용체를 추가시켜 기본 NKN 조성보다 소결밀도, 유전 및 압전특성을 향상시키고자 하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.5
• /
• pp.585-596
• /
• 2012

PVDF(poly vinylidene fluoride) and P(VDF-TrFE)(poly vinylidene fluoride-tetrafluoroethylene) are the typical piezoelectric polymers with unique properties. Even they are inferior to conventional piezoelectric ceramics PZT in electromechanical conversion efficiency and interior loss, though they are superior in receiving sensitivity and frequency bandwidth. Their acoustic impedances are relatively close to water or biological tissue and it is easier to make thin film than other piezoelectric materials. Futhermore, the film is so flexible that it is easy to attach on a complex surface. Those properties are suitable for the ultrasound transducers which are useful for medical and biological application, so that various types of polymer transducers have been developed. In this paper, several important considerations for design and fabrication of piezoelectric polymer transducers were described and their effect on the transducer performance were demonstrated through the KLM model analysis. Then, it was briefly reviewed about the structures of the polymer transducers developed for obtaining images as well as the characteristics of the images in several important medical and biological application fields.