• 전력전자학회논문지
• /
• 제19권1호
• /
• pp.71-79
• /
• 2014

In this paper, a new grid voltage estimation algorithm without voltage sensors is proposed for the three-phase vienna rectifier. Generally, input voltage sensor circuits increase size and cost of the PWM rectifier In order to reduce the cost and size and in order to increase reliability from the electrical noise, grid voltage estimation scheme without input voltage sensor is highly required. In this paper, the grid voltage estimation algorithm is proposed by a simple MRAS(Model Reference Adaptive System) observer without input voltage sensors. The validity of the proposed method is proven by simulation and experiment on the three-phase vienna rectifier system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.208-209
• /
• 2013

본 논문에서는 PWM 정류시스템의 간소화, 안정화, 비용상승의 문제점을 해결하기 위한 4스위치 3상 Z-소스 PWM 정류기의 센서리스 제어 기법을 제안하였다. 제안한 정류기는 입력단 전원전압 센서 없이 입력전류 센서와 DC-link단 전압센서 만을 이용하여 전원전압을 추종하고 DC-link 전압제어를 구현 하였으며, 이를 PSIM 시뮬레이션을 통하여 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 추계학술대회
• /
• pp.18-19
• /
• 2011

본 논문에서는 3상 PWM 정류기의 스위치 개방 고장시 감지 및 허용 운전 방법에 대해 제안한다. 스위치의 개방 고장이 발생 하면, 한상의 전류가 반주기 동안 나타나지 않기 때문에 출력 직류전압의 리플로 나타나게 된다. 이경우 고장 감지 및 허용 운전을 하지 않으면, 전력 품질을 저하되며, 직류 링크 콘덴서의 수명이 감축되는 문제를 발생 시킨다. 제안된 기법은 추가적인 하드웨어 없이 간단한 모델 적응 제어 (Model Reference Adaptive System)을 이용하여, 고장된 스위치를 감지 하며, 고장난 스위치의 반대 스위치를 켜고 나머지 2상을 전류제어 하여 3상 전류를 평형상태로 만들어 출력 직류전압의 리플을 줄이는 허용운전을 제안한다. 본 논문은 6kW급 3상 PWM 정류기 시스템을 모의해석을 통해 제안된 기법의 타당성을 입증 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.451-455
• /
• 1991

The PWM control technique is proposed which can eliminate the harmonic components of the nonsinusoidal ac line current such as the current of 6-phase rectifier by injecting PWM current. TSC(Time-Sharing Control) is adopted to avoid the unbalance between three PWM injection currents at the three-phase system. Also a new power circuit for three-phase filter is suggested for realizing the proposed PWM control technique. The operation characteristics are investigated theoretically and experimentally to show the feasibility of the optimized injection method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.529-534
• /
• 2000

Diode rectifier has been widely used as he preregulator of inverter arc welding machine(IAW). As it is linked to power utility a disorder of other instruments can be burst out. The adoption of voltage source PWM converters can be considered and which must catch the compromise of between performance and cost. So in this paper voltage source PWM converters which have single (i.e. PWM converter) control switch respectively are analyzed and evaluated through digital simulation and experiment. In addition the improved input characteristics of IAW are shown and compare to those of conventional one.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권2호
• /
• pp.123-129
• /
• 2000

This paper proposes a novel current control method of three-phase PWM rectifiers using estimated currents without phase current sensors. The phase currents are reconstructed from switching states of the rectifier and the measured dc output currents. To eliminate the calculation time delay effect of the microprosessor, the current at the next sampling instant are predicted by a predictive state observer and then are used for feedback control. Experimental results show that the control performance of the proposed system is almost the same as that of the phase current sensor-based system.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.188-192
• /
• 2000

This paper presents a novel prototype of soft-switching PWM Full-bridge converter which incorporates active power switches in series with each rectifier diode in transformer secondary side. Switching and conduction losses of all the switches and devices are reduced as well as commutating current and circulating current flowing through transformer as compared with conventional converter. And duty ratio of primary switches is constant for maximum voltage conversion ratio. But this converter can be varied output by duty ratio of secondary switches. Operation principles basically the same as that of the PWM Full-bridge converter published previously. The operating characteristics of this converter are illustrate and discussed including the simulated analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.367-370
• /
• 1987

A high-performance PWM technique in current-controlled AC to DC converter is introduced. This converter used information about source voltage vectors to make good PWM switching pattern that it can control the DC output voltage with reduced ripple factor and rapid response. In addition to reduction of harmonic current, AC input power factor can be controlled to leading or lagging by current reference. Simulation was made based on analytical approach and it showed a good agreement with theory.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.933-934
• /
• 2006

본 논문에서는 새로운 양방향 ZVS PWM Sepic/Zeta 컨버터를 제안한다. 제안한 컨버터는 PWM 제어가능한 컨버터로서 입력과 출력전압의 극성이 같은 비반전 컨버터의 특징을 지니며 DC 전압의 전달함수가 양방향 모두 M=D/(1-D)로 동일하다. 또한 각방향으로 전력전달시 다이오드와 병렬로 연결된 MOSFET가 다이오드의 'ON'시 동시에 'ON'되어 Sychronous Rectifier로 동작하므로 도통손을 저감하였으며, Auxiliary Resonant Commutated Pole를 사용하여 저감된 스위칭 손실을 갖는 특성을 지니고 있다. 또한 Transformer 버전이 존재하므로 입력과 출력사잉에 전기적 절연을 필요로 하는 실제응용에 유용하게 사용할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.246-248
• /
• 1994

This paper describes a bidirectional Voltage Source PWM Converter for an elevator. From the study of boost rectifier, the control circuit desisted by full digital DSP technique. The characteristic of control circuit is that implements of space-vector PWM method and has feedback loop of DC side load current which reduce DC voltage flucturation.