• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.605-609
• /
• 2000

This paper presents a development of the Pulse Width Modulation ASIC for control of the AC servo or spindle motor in machine tools. The ASIC is designed two PWM functions for simultaneous control of a converter and an inverter. Also the device includes additionally two UART functions for interfacing the RS232C with PC or other devices. The device is connected to the microprocessor of Intel or Motorola by bus interface. The required output voltage and frequency for the motor control is programmed to the PWM block and the corresponding switching signals are calculated and generated with regard to the programmed value.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.442-443
• /
• 2011

In this paper, a voltage control method based on DQ transformation and Space Vector Pulse Width Modulation (SVPWM) for a single phase three-level converter is proposed. This control method is designed to use DC values instead of using instantaneous values of current which are usually used in single-phase application, so that it results in a fast and robust voltage control response. Simulation results demonstrate the validity of the control strategies.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1067-1070
• /
• 1992

Optimal Asymmetrical Pulse-width Modulated (APWM) technique for ac chopper is proposed which can improve the input power factor and eliminate the harmonics of output voltage up to a specified order, and also enables linear control of the fundamental component of the output voltage. The PWM switching patterns at the specified phase angle are obtained by Newton-Raphson method and theoretical comparisons are made with other PWM and APWM technique.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.10a
• /
• pp.443-446
• /
• 2004

This paper discusses an intelligent digital redesign technique for designing a fuzzy pulse-width-modulated (PWM) control. First when we are given a well-designed fuzzy analog control, the equivalent digital control is intelligently redesigned. Using the similar technique we intelligently redesign the fuzzy PWM control from the intelligently redesigned fuzzy digital control. A stabilizability of the intelligently redesigned PWM control is rigorously analyzed.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.527-530
• /
• 1989

In order to reduce harmonic contents in the inverter output, various PWM ( pulse with modulation ) techniques have been utilized. This paper suggests a single phase inverter with 4-level output and its PWM control scheme. The proposed 4-level output inverter shows better performence than the 3-level output one in respects of the current error and the switching frequency.

• Journal of Industrial Technology
• /
• v.30 no.B
• /
• pp.109-112
• /
• 2010

Unlike the general lighting systems, stage lighting system requires accurate dimming control and reduction of flicker phenomenon. In this paper, we studied PWM dimming control and linear voltage level control methods. PWM Dimming is easy control and flicker phenomenon of linear voltage level dimming does not happen by experiment result. We concluded that stage lighting dimming system required to combine two techniques of the PWM and linear voltage level dimming control method.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1995.10a
• /
• pp.80-84
• /
• 1995

ABSTRACT - This paper presents a software based 3 phase 5 level pulse-width modulation(PWM) inverter to reduce total harmonic distortion. The proposed modulation technique can reduce total harmonic distortion and significantly improve the performance of the inverter. In the modulation mode where the frequency ratio is 36 and modulation index is 1.2∼2.0, harmonic components have been mostly eliminated and the magnitude of fundamental component have been maximized by the 3 phase 5 level PWM inverter.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.11
• /
• pp.1441-1447
• /
• 1999

A discrete time domain modeling is presented for the pulse-width modulated series resonant converter (PWM-SRC) with a discontinuous current mode. This nonlinear system is linearized about its equilibrium state to obtain a linear discrete time model for the investigation of small signal performances such as the stability and transient response. The usefulness of this small signal model is verified through the dynamic simulation.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.106-108
• /
• 2020

This paper introduces a new pulse-width modulation (PWM) method to reduce common-mode voltages (CMVs) and compare its performance with other reduced CMV-PWM (RCMV-PWM) methods. To avoid the use of zero-vectors which cause high CMV peaks, the introduced method splits every reference vector into two vectors such that the peak-to-peak magnitude of CMV is reduced by one-third of conventional space-vector PWM (SVPWM). The performance of RCMV-PWMs altered by the modulation index are analyzed with simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1265-1268
• /
• 1996

This paper describes a new pulse width modulation (PWM) scheme suitable for microprocessor-based PWM inverters. Optimal switching patterns minimizing the performance index corresponding to the distortion factor are decided in real time by numerical calculation using the microprocessor-implemented control system. This PWM method is compared with conventional methods, such as the natural PWM and the direct PWM. Harmonic analysis using digital simulations shows that the proposed PWM scheme has much less low-order harmonics than the other methods. The validity of this method is verified in experiments using a microprocessor-based control system, where a 16-bit single-chip microcontroller, Intel 80c196kc is used.