• 제목/요약/키워드: PVC-membrane

검색결과 169건 처리시간 0.028초

피막법에 의한 경구투여용 제어방출제제의 개발-III-테오필린함유 제어방출제제의 제조 및 사람의 타액중 농도로부터의 평가- (Development of Controlled Release Oral Drug Delivery System by Membrane-Coating Method-III- Preparation of Theophylline Tablets and Pharmacokinetic Evaluation in Man-)

  • 심창구;김종국;이민화;김신근
    • Journal of Pharmaceutical Investigation
    • /
    • 제22권3호
    • /
    • pp.205-210
    • /
    • 1992
  • In order to develop a controlled-release oral drug delivery system (DDS) of theophylline (TP), microporous membrane-coated tablets were prepared and evaluated in vitro and in vivo. Rapidly water-soluble core tablets of TP (300 mg) were prepared by wet granulation and compression technique, Then the core tablets were spray-coated with polyvinylchloride (PVC) in which micronized sucrose particles were dispersed. Effect of formula compositions of coating suspensions on the pharmaceutical characteristics such as membrane strength and dissolution was investigated in vitro. The membranes remained unbroken in pH 1.2 buffer at $37^{\circ}C$ at least for 2 hours after the disintergration test. TP was released from the coated-released tablets at a zero-order rate over 8 hours. The release at pH 1.2 and 4.0 was similar in rate but a little more rapid than that at pH 6.8. The coated tablets were administered to three healthy male volunteers and their saliva profiles of TP were compared with those from the commercial sustained release TP tablets such as Slobid and Asconthin. Saliva TP concentrations from the coated tablets were successfully sustained over 48 hours after the dosing and were comparable to those of the commercial sustained-release tablets. The membrane-coating technique is very simple and does not need any sophisticated equipments. In this respect, the membrane-coated tablets may be superior to the commercial sustained-release tablets and this technique is worth adopting by the pharmaceutical industries.

  • PDF

건축용 막구조 제품의 실리콘 기능성 코팅에 관한 연구 (A study on the functional coatings using silicone resin of Architectural membrane structures products)

  • 최윤성;이장훈;윤남식;김수홍;유구근
    • 한국염색가공학회:학술대회논문집
    • /
    • 한국염색가공학회 2012년도 제46차 학술발표회
    • /
    • pp.106-106
    • /
    • 2012
  • 막구조(Membrane structure)란 건축분야에서 "fabric structure" 또는 tension structure"와 같이 사용되는 용어로 코팅된 직물(coated fabrics)을 주재료로 사용하는 구조를 말한다. 특히 구조체로서 연성의 막을 이용 이것에 초기 장력을 주어 강성을 늘림으로서 외부하중에 대하여 안정된 형태를 유지하는 장점을 갖고 있다. 초기 창안된 독일의 온화한 기후에 적용되는 반면 한국이나 일본에는 60m/sec를 넘나드는 태풍의 피해와 많은 적설량을 보이는 기후적 제약으로 발달되지 못하였다. 그러나 최근 새로운 소재의 막구조 제품 개발과 구조해석 방법 및 시공기술 등이 개발되어 보편화되어지고 있는 실정이다. 막구조용 재료로 사용되는 섬유소재는 주로 Polyester직물을 기재로 한 PVC 코팅 제품으로 일반 PVC 막재는 장력이 약하고, 광선에 의한 물성이 쉽게 변화되어 내구연한이 5~15년에 불과하다. 유리섬유나 아라미드섬유 등으로 제직한 기재에 고내열 실리콘이나 PTFE 수지를 코팅한 제품은 약품에 대한 내구성이 높고 자외선에 대해서는 매우 큰 저항성을 가지기 때문에 내구연한이 10년에서 30년 까지도 향상된다. 그러나 실리콘 코팅막은 세계적으로 가장 좋은 막재로 알려졌으나 자정능력(Self Cleaning)에 문제가 발생되어 사용량이 감소 추세라고 할 수 있다. 일반적인 코팅 가공의 경우 MEK, Toluene, DMF 등과 같은 유기용제를 다량 사용함에 따라 작업환경 및 대기오염, 화재 위험 등의 문제점이 있으며 특히 가공시 잔류되는 유기용제의 심각성이 대두되고 있는 상황이다. 이와 같이 코팅 가공제 자체를 친환경적인 물질로 대체하여 각종 환경규제에 대응하고 유해 폐기물의 발생을 줄일 수 있는 코팅 가공제 및 가공기술 개발이 절실하다. 이에 본 연구에서는 Glass-Fiber, Aramid 등의 슈퍼 섬유와 고 강력 섬유 등을 이용하여 PTFE 코팅제품과 비슷한 수준의 성능을 부여하는 무용제형 실리콘 코팅 수지를 개발하고 내구성능 향상, Self Cleaning성, 난연성, 자외선 차단, 인장강도 및 인열 강도의 향상 등 다양한 기능성을 부여하는 최적의 환경 친화적 코팅 공정 기술을 개발하여 차세대 건축용 막구조 제품을 개발하고자 한다.

  • PDF

양쪽성 가지형 공중합막을 이용한 다양한 모양의 은 나노입자 제조 (Preparation of Silver Nanoparticles with Various Morphology Using Amphiphilic Graft Copolymer Membranes)

  • 서진아;최진규;안성훈;연승현;김종학
    • 멤브레인
    • /
    • 제20권2호
    • /
    • pp.169-172
    • /
    • 2010
  • Poly(vinyl chloride)-g-poly(styrene sulfonic acid) (PVC-g-PSSA) 가지형 공중합체를 합성한 후, 이를 이용하여 $80^{\circ}C$에서 열적으로 환원하여 은 나노입자를 제조하였다. 반응 시간을 바꿈에 따라 다양한 구조의 은 나노입자를 제조하는데 성공하였다. 1시간 정도의 짧은 반응 시간에서는 가지형 공중합체의 미세 상분리 구조를 크게 변화시키지 않고 5 nm 크기의 작은 은 나노입자가 생성되었다. 5시간 정도의 중간 반응 시간에서는 30 내지 50 nm 정도의 크기를 갖는 은 나노입자가 생성되었다. 18시간 정도의 긴 반응 시간에서는, 은입자가 뭉친 허리케인 모양의 은 집합체가 관찰되었다.

능동형 박막 광도파로 칼슘 이온 센서의 개발 (Development of Active thin Film Optical Waveguide $C^{2+}$ -ion Sensor)

  • 이수미;강신원
    • 전자공학회논문지SC
    • /
    • 제37권4호
    • /
    • pp.49-54
    • /
    • 2000
  • 고분자 이온 감응막을 광도파로로 이용한 새로운 형태의 센서소자를 제작하여 칼슘이온의 농도 변화에 따른 그 특성을 평가하였다. 광도파로 소자는 실리카 유리기판에 기존의 반도체 사진식각법 (photolitho-graphy)을 이용하여 도파로가 형성되어질 부분을 에칭한 후 감지막을 스핀코팅법으로 코팅하여, 그 자체를 도파로로 이용한 고속 응답의 새로운 형태의 센서소자를 제작하였다. 도파로로 사용된 감지막은 칼슘이온에 대해 특이성을 가지는 변색성 이온감응물질인 ETH5294, 중성이온감응물질인 K23El, anionic site인 NaTm(CF/sub 3/)/sub 2/PB, 가소제인 DOP 및 PVC-PVAC-PVA 폴리머를 THF 용매에 녹여 스핀 코팅법으로 제작하였다. 여러 가지 변수에 따른 센서의 특성을 평가하기 위하여 도파로의 두께(즉, 감지막의 두께), 변색성 이온감응물질의 농도, 각 모드 변화에 따른 센서의 감응특성을 비교 평가하였다. 제작된 센서는 칼슘이온에 대해 1×10­6∼1M의 측정 범위를 가지며, 1×10­⁴∼1×10­¹M 영역에서 선형성을 가지며, 기존의 광학적 측정 방법인 분광분석법에 비해 높은 감도를 나타냄을 확인하였다.

  • PDF

La(III) Selective Membrane Sensor Based on a New N-N Schiff's Base

  • Ganjali, Mohammad Reza;Matloobi, Parisa;Ghorbani, Maryam;Norouzi, Parviz;Salavati-Niasari, Masoud
    • Bulletin of the Korean Chemical Society
    • /
    • 제26권1호
    • /
    • pp.38-42
    • /
    • 2005
  • Bis(2-methylbenzaldehyde)butane-2,3-dihydrazone(TDSB) was used as new N-N Schiff's base which plays the role of an excellent ion carrier in the construction of a La(III) membrane sensor. The best performance was obtained with a membrane containing, 30% poly(vinyl chloride), 60% benzyl acetate, 6% TDSB and 4% sodium tetraphenyl borate. This sensor reveals a very good selectivity towards La(III) ions over a wide variety of cations, including alkali, alkaline earth, transition and heavy metal ions. The proposed electrode exhibits a Nernstian behavior (with slope of 19.8 mV per decade) over a wide concentration range (1.0 ${\times}$ 10$^{-5}$-1.0 ${\times}$ 10$^{-1}$ M). The detection limit of the sensor is 7.0 ${\times}$ 10$^{-6}$ M. It has a very short response time, in the whole concentration range ($\sim$5 s), and can be used for at least twelve weeks in the pH range of 3.0-9.4. The proposed sensor was successfully applied as an indicator electrode for the potentiometric titration of a La(III) solution, with EDTA. It was also successfully applied in the determination of fluoride ions in three mouth wash preparations.

Improved Thiocyanate-Selective Electrode Based on Tetra(trimethylphenyl)-porphyrinato Manganese(III) Chloride: The Electronic and pH Effects

  • Seo, Hyung-Ran;Lee, Hyo-Kyoung;Jeon, Seung-Won
    • Bulletin of the Korean Chemical Society
    • /
    • 제25권10호
    • /
    • pp.1484-1488
    • /
    • 2004
  • The thiocyanate-selective PVC membrane electrodes based on 5,10,15,20-tetrakis(2,4,6-trimethylphenyl)-porphyrinatomanganese(III) chloride [Mn(TMP)Cl] and 5,10,15,20-tetrakis(2,6-dichlorophenyl)porphyrinatomanganese(III) chloride $[Mn(Cl_8TPP)Cl]$ as ion carriers were investigated. The effect of ionophores, membrane compositions, plasticizers, and solution pHs on the response characteristics were studied. The Mn(TMP)Cl as an ionophore shows the best potentiometric sensitivity with a slope of -58.7 mV/decade and a detection limit of $log[SCN^-]$ = -6.90, and selectivity for thiocyanate over strong hydrophobic interfering anions such as ${ClO_4}^-$ and salicylate. The potentiometric response is affected by the electronic effect of the substituents and solution pHs. The presence of substituents with electron donating and more liphophilic characters around the ligated metal center produces an improved response toward $SCN^-$.

Colonization of Microbial Biofilms in Pipeline of Water Reuse

  • Kumjaroen, Teratchara;Chiemchaisri, Wilai;Chiemchaisri, Chart
    • Environmental Engineering Research
    • /
    • 제19권3호
    • /
    • pp.275-281
    • /
    • 2014
  • Aim of this study was to investigate biofilms attached in pipeline of water reuse from the MBR system treating sewage without chlorination in correlation to the outflow water quality. Two general pipe materials: polyvinyl chloride (PVC) and polyethylene (PE) were employed in the experiment. The peak growths were found at week 4 in both pipes. The maximum biofilms in PE pipe was $33mgVSS/cm^2$ with the growth rate of $4.75mgVSS/cm^2-d$ which was significant higher than that of PVC pipe. Biofilms examined by PCR-DGGE technique revealed five bacterial species in PE biofilms namely Sinorhizobium medicae WSM419, Sinorhizobium fredii NGR234, Geobacter sp. M18, Parachlamydia acanthamoebae UV-7, and Mycobacterium chubuense NBB4. The VSS concentrations in outflow had directly correlated to the biofilm attachment and detachment. High COD concentrations of outflow appeared during biofilm detaching phase. In summary, water quality of reuse water corresponded to the biofilms attachment and detachment in the pipeline.

The Novel SCN- Ion-selective Electrode Based on the 1-Benzyl-3-(4-nitrophenyl) thio-urea Ionophore

  • Lee, Kyungmi;Kang, Dong Hyeon;Choe, Ju Eun;Yun, Mira;You, Jung-Min;Go, Min Jeong;Lee, Junseong;Jeon, Seungwon
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권11호
    • /
    • pp.3175-3180
    • /
    • 2014
  • A potentiometric sensor based on the 1-benzyl-3-(4-nitrophenyl) thio-urea was synthesized and tested as an ionophore in PVC based membrane sensor towards $SCN^-$ ions. This membrane exhibits a linear stable response over a wide concentration range ($1.0{\times}10^{-5}$ to $1.0{\times}10^{-2}M$) with a slope of -59.2 mV/dec., a detection limit of ${\log}[SCN^-]=-5.05$, and a selectivity coefficient for thiocyanate against perchlorate anion of ${\log}K^{pot}_{SCN^-j}=-0.133$. The selectivity series of the membrane is as follows: $SCN^-$ > $ClO_4{^-}$ > $I^-$ > $NO_3{^-}$ > $HSO_3{^-}$ > $Cl^-$ > $HSO_4{^-}$ > $F^-$ > $CH_3COO^-$ > $HCO_3{^-}$ > $Br^-$ > $H_2PO_4{^-}$ > $SO{_3}^{2-}$ > $SO{_4}^{2-}$ > $CO{_3}^{2-}$. The proposed electrode showed good selectivity and a good response for the $SCN^-$ ion over a wide variety of other anions in pH 6.0 buffer solutions and has a fast response time of about < 5s. The influences of the membrane by pH, ionophore, and plasticizer were studied.

화학센서를 위한 유기 용해성이 좋은 도전성 고분자가 포함된 전체 고체상태 이온 선택성 전극에 대한 연구 (All-Solid-State Ion-Selective Electrodes With Organic Solvents Soluble Conducting Polymer for Chemical Sensor)

  • 김중일;박정호;장원;허민;나영호;신재호;김도영;엄환섭;이상우;김인태
    • 한국응용과학기술학회지
    • /
    • 제30권2호
    • /
    • pp.258-263
    • /
    • 2013
  • Carbazole, EDOT 와 benzobisthiazole이 포함되어진 새로운 전도성 고분자의 합성 및 특징을 유기 분광학적인 방법으로 규명하였다. 포텐티오메트릭 이온 선택성 막 전극들은 넒은 감응범위($10^4{\sim}10^7$)와, 시료의 혼탁도에 영향을 주지 않으며, 빠른 감응 시간과 소형화가 쉬운 이유로 병원, 환경과 산업 현장에서 널리 이용되고 있다. 이 전극의 막에는 강한 흡착과 열적인 안정성에서 뛰어난 상온에서 경화시킨 (RTV)-타입 실리콘 고무가 사용되었다. 불행하게도, 이 실리콘 고무 기반의 전극의 높은 막 저항(PVC 기반의 것과 비교하여 $10^2{\sim}10^3$배 더 높은 수치)이 응용에 제한이 되어 왔다. 여기에서 우리는 실리콘 고무 막에 전도성 고분자를 첨가 하여 막 저항이 줄어든 새로운 고체 전극을 구현하였다.