• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.206-212
• /
• 2008

Alginate obtained from marine brown algae, is a copolymer with repeating units of $\alpha$-($1{\rightarrow}4$)-L-guluronic acid(G) and $\beta$-($1{\rightarrow}4$)-D-mannuronic acid(M). It has good properties such as biocompatibility, non-toxicity. and hydrophilicity. However, alginate alone cannot be electrospun due to high viscosity and conductivity. To solve this problem. electro spinning of sodium alginate(SA) was performed by blending with poly(ethylene oxide)(PEO) and poly(vinyl alcohol)(PVA) in this study. Characteristics of SA/PEO nanofibers and SA/PVA nanofibers were estimated by SEM and XRD analyses. Optimal nanofiber webs are obtained from 2/2 wt% of SA/PEO and 2/7 wt% of SA/PVA. SA/PEO and SA/PVA nanofiber webs may have potentials for tissue engineering scaffold and wound dressing.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.137-140
• /
• 2009

Nowadays, the high performance composite materials are famous for the new construction materials as the construction buildings are bigger and higher. Out of them of all, the fiber reinforced concrete and mortar have been studied to develop and strengthen the performances of concrete, such as tensile strength, durability and the resistibility of crack. Also, it is considered that precast concrete is important alternatives of dry process for saving time, upgrading the material's quality and the productivity. Thus, PC panel is being produced for the use of dry wall as well as exterior finishing materials and it requires lots of tests and studies to be conducted to meet the various functional conditions. According to this study, it is considered that PVA fiber might be more effective than nylon fiber for developing the exterior PC panels.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.5
• /
• pp.101-107
• /
• 2008

This study investigated fundamental characters of the concrete according to various fiber types and contents and their properties of spatting resistance and residual compressive strength after fire test corresponding to ISO and RABT heating corves. The results were summarized as following. The Flowability was gradually declined as the increase of fiber contents, and it was the most favorable with nylon(NY) fibers. The decrease of air contents due to increasing fiber contents was in order by polypropylene(PP), polyvinyl alcohol(PVA) and NY fibers. The compressive strengths were over 40 MPa at 7 days and 50 MPa at 28 days. It was in order by PVA, PP and NY fibers. For the spatting properties, all specimens were prevented at ISO heating curve. In the other hand, the partial spatting at the surface occurred on the plain without fibers, but it was prevented over 0.10 % of PVA and 0.05 % of PP and NY fibers at the RABT heating curve.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1553-1560
• /
• 2021

We have confirmed that optimized transmittance and surface resistance by electrospinning time, also the fabricated transparent electrode composed of silver nanofiber with excellent electrical, optical and mechanical performances is showed applicability to next generation flexible displays such as solar cells, displays, and touch screens. → We have confirmed the optimized transmittance and surface resistance by electrospinning time Also the fabricated transparent electrode composed of silver nanofiber with excellent electrical, optical and mechanical performances showed applicability to next generation flexible displays such as solar cells, displays, and touch screens.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2001.08a
• /
• pp.51-68
• /
• 2001

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.122-129
• /
• 2019

Cracks in concrete structures are inevitable phenomena caused by shrinkage, hydration heat, and external loads. These cracks facilitate the penetration of external harmful ions into the concrete, which greatly reduces its durability. Recently, self-healing concrete has been actively studied. Also, self-healing fiber-reinforced concrete have been studied to control the crack in concrete and to maximize the shelf-healing capability. In this study, mortar specimens containing PVA fiber, fly ash and crystalline admixture were fabricated. The compressive and flexural strength were evaluated. Also, the self-healing performance was evaluated by the absorption test. From the results, it was confirmed that the amount of water absorbed by healing of the crack decreased as time increased. It was also found that PVA fiber is beneficial for the production of calcium carbonate, an additional healing product.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.2
• /
• pp.269-277
• /
• 2018

This study extracted Artemisia capillaris Thunberg with distilled water and ethanol to investigate its antioxidant effect. We then investigated the possibility of producing nanofibers by an electrospinning process by adding the extracts to polyvinyl alcohol (PVA). The electrospinning method used a PVA concentration of 12wt.%, an applied voltage of 10kV, and a tip-to-collector distance of 15cm. Total polyphenol and total flavonoid contents were measured to verify the antioxidant activity of Artemisia capillaris Thunberg extracts (ACEs). The total polyphenol content of the distilled water extract and the ethanol extract were measured as 218.47 and 271.26mg/g, respectively, and the total flavonoid content of the distilled water extract and the ethanol extract were measured as 141.68 and 34.98mg/g, respectively. As the content of the ACEs in the PVA nanofibers increased, the Diameters of the nanofibers and the uniformity of the diameters decreased. The electrospinning process was fabricated in a relatively uniform form without beads, and the diameters of the nanofibers that were produced ranged from 340 to 390nm. The results of FT-IR, XRD and DSC analyses confirmed that the ACEs were well mixed with the PVA molecules and were electrospun.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.8
• /
• pp.3-11
• /
• 2018

In this study, total nine R/C beams, designed by the PVA Fiber with ground granulated blast furnace slag and recycled fine aggregate were constructed and tested under monotonic loading. In the material development, micromechanics was adopted to properly select the optimized range of the composite based on steady-state cracking theory and experimental studies on the matrix and interracial properties. Experimental programs were carried out to improve and evaluate the structural performance of the test specimens: the load-displacement, the failure mode, the maximum strength, and ductility capacity were assessed. Test results showed that test specimens (BSPR-20, 40) was increased the maximum load carrying capacity by 3~6% and the ductility capacity by 9~14% in comparison with the standard specimen (BSS). And the specimens (BSPR-60, 80, 100) was decreased the maximum load carrying capacity by 0~4% and the ductility capacity by 79% in comparison with the standard specimen (BSS) respectively.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.87-90
• /
• 2003

Polyvinyl Alcohol(PVA)와 같이 분자간 결합력이 큰 극성고분자에 극성의 가소제를 도입하여 가역적 가소화기법을 이용하여 비결정영역뿐만 아니라 결정영역까지도 가소화시켜 연신성을 개선시키고자하는 연구가 일부 이루어져 왔다. 특히 요드는 극성고분자의 비결정 영역뿐만 아니라 결정영역까지 침투한다는 사실이 밝혀지면서 PVA의 요드 처리에 대한 연구가 많이 이루어져왔다[1-3]. 그러나 지금까지의 연구에서는 대부분 필름이나 섬유와 같이 성형가공된 상태에서, 즉 결정화가 이루어진 후에 요드화를 시켰기 때문에 그 응용범위나 연구에 있어서 한계를 지니고 있다고 할 수 있다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.189-190
• /
• 2007