• 조명전기설비학회논문지
• /
• 제21권8호
• /
• pp.54-63
• /
• 2007

본 논문은 태양광 인버터 시스템의 최대출력을 근사적으로 구하는 새로운 방법과 태양광 추적 방법을 제시한다. 제시한 새로운 MPPT 제어는 LRCM(Linear Reoriented Coordinates Method)이라 하며, 본 논문에서는 PV 어레이를 위한 DC측 동적 방정식과 LRCM을 사용하여 계통연계를 위한 새로운 수학적인 동적 모델을 제시한다. LRCM은 근사적인 해법으로 반복적으로 나타나는 최적 전압과 최대 전력을 결정하며 계산시간을 절약할 수 있다는 장점을 가진다. 또한 태양광 추적 방식은 고정식에 비하여 태양광 발전 효율을 50[%]이상 향상시킨다. 본 논문은 LRCM을 사용한 MPPT와 국내 기상상태에 적합한 프로그램 방식을 이용하여 태양광 추적기법을 제시하고, 실험을 통해 제시한 기법의 타당성을 입증한다.

• Journal of Radiation Protection and Research
• /
• 제28권4호
• /
• pp.281-290
• /
• 2003

The KN-12 spent nuclear fuel transport cask, which is a Type B(U) package designed to comply with the requirements of Korea Atomic Energy Act[1], IAEA Safety Standards Series No.TS-R-1[2] and US 10 CFR Part 71[3], is designed for carrying up to 12 PWR spent fuel assemblies in a basket structure. The cask has been licensed in accordance with Korea Atomic Energy Act and was fabricated in Korea in accordance with the requirements of ASME B&PV Sec.III, Div.3[4]. The cask must maintain thermal integrity in accordance with the related regulations and be evaluated to verify that the thermal performance of the cask complies with the regulatory requirements. The temperatures of the cask and components were determined by using finite elements methods with a numerical tool, safety tests using an 1/8 height slice model of the real cask were conducted to demonstrate verification of the numerical tool and methods, and heat transfer tests for normal transport conditions were performed as a fabrication acceptance test to demonstrate the heat transfer capability of the cask.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권2호
• /
• pp.42-47
• /
• 2016

A free-piston reciprocating expander is a device which operates without any mechanical linkage to a stationary part. Since the motion of the floating piston is only controlled by the pressure difference at two ends of the piston, this kind of expander may indispensably require a sophisticated active control system equipped with multiple valves and reservoirs. In this paper, we have suggested a novel design that can further reduce complexity of the previously developed cryogenic free-piston expander configuration. It is a simple replacement of both multiple valves and reservoirs by a combination of an orifice valve and a reservoir. The functional characteristic of the integrated orifice-reservoir configuration is similar to that of a phase controller applied in a pulse tube refrigerator so that we designate the one as a phase controller. Depending on the orifice valve size in the phase controller, the different PV work which affects the expander performance is generated. The numerical model of this unique free-piston reciprocating expander utilizing a phase controller is established to understand and analyze quantitatively the performance variation of the expander under different valve timing and orifice valve size. The room temperature experiments are carried out to examine the performance of this newly developed cryogenic expander.

• 전기학회논문지
• /
• 제64권3호
• /
• pp.393-398
• /
• 2015

City or Community-scale Energy Management System(CEMS) is used to reduce the total energy consumed in the city by arranging the energy resources efficiently at the planning stage and controlling them economically at the operating stage. Of the operational functions of the CEMS, generation forecasting of renewable energy resources is an essential feature for the effective supply scheduling. This is because it can develop daily operating schedules of controllable generators in the city (e.g. diesel turbine, micro-gas turbine, ESS, CHP and so on) in order to minimize the inflow of the external power supply system, considering the amount of power generated by the uncontrollable renewable energy resources. This paper is written to introduce numerical models for photo-voltaic power generation prediction based on the weather forecasting information. Unlike the conventional methods using the average radiation or average utilization rate, the proposed models are developed for CEMS applications using the realtime weather forecast information provided by the National Weather Service.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.185-190
• /
• 2009

Due to the building energy consumption of total energy consumption of Korea takes over 24%, economizing building energy and using renewable energy resources is being required. To suggest the prototype of zero energy house of country house, the passive systems and active systems are applicated and simulated. In case of wall insulation system is applicated, the heating load of building is reduced. Also, clear triple pair glazing system reduced 2.1% of heating load of building. The amount of reducing heating load by infiltration is depending on the Heating system. In this model, the 0.3ACH made 14.6% saving on heating load from base infiltration 0.82ACH. The solar thermal system of active system could save 80% of DHW and PV system supplies electric power more than average consumption of year. Through the optimum process, the end use of zero energy house of country house is 36kWh/m2.yr and total energy consumption is reduced about 74.2%.

• 한국태양에너지학회 논문집
• /
• 제33권3호
• /
• pp.107-113
• /
• 2013

In this study, three different types of experimental models of BIPV curtain wall units with GIGS modules were built, and their thermal and electrical performances were analyzed. The experimental results showed that the temperature of the rear side of the GIGS module with the application of an insulation in the curtain wall spandrels was higher than a GIGS module standalone by $22^{\circ}C$, which results in a reduction in the power generation of the former by 8 %. On the other hand, when ventilation was applied to the model to improve the power generation performance, the module temperature was observed to be $142^{\circ}C$ lower compared to the enclosed type, and the power generation performance improved by 5 %. It confirmed that the temperature increase in the rear side of the GIGS module with insulation layer reduced the electrical performance of the module. Based on this, it is claimed that providing sufficient ventilation at the GIGS applied spandrels contribute to improve the power generation of the GIGS module.

• 도시과학
• /
• 제8권1호
• /
• pp.7-14
• /
• 2019

Recently, interest in solar energy, which is the center of new government energy policy, is increasing. However, the focus is on mass production of solar power plants, and policies and related technologies for maintenance and management of existing installed PV modules are insufficient. In this study, we use UAV (Unmanned Aerial Vehicle) to acquire RGB and infrared images, apply it to the structure-from-motion (SfM) based image analysis tool, model the three- And the position of the hot spot was monitored and coordinates were detected. As a result, it is possible to provide basic spatial information for maintenance of solar module by monitoring and position detection of hot-spot suspected solar cells by superimposing infrared image and RGB image based on unmanned aerial vehicle.

• Current Photovoltaic Research
• /
• 제6권4호
• /
• pp.109-118
• /
• 2018

Silicon (Si) solar cells are the most successful technology which are ruling the present photovoltaic (PV) market. In that essence, multijunction (MJ) solar cells provided a new path to improve the state-of-art efficiencies. There are so many hurdles to grow the MJ III-V materials on Si substrate as Si with other materials often demands similar qualities, so it is needed to realize the prospective of Si tandem solar cells. However, Si tandem solar cells with MJ III-V materials have shown the maximum efficiency of 30 %. This work reviews the development of the III-V/Si solar cells with the synopsis of various growth mechanisms i.e hetero-epitaxy, wafer bonding and mechanical stacking of III-V materials on Si substrate. Theoretical approaches to design efficient tandem cell with an analysis of state-of-art silicon solar cells, sensitivity, difficulties and their probable solutions are discussed in this work. An analytical model which yields the practical efficiency values to design the high efficiency III-V/Si solar cells is described briefly.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.2883-2897
• /
• 2022

According to the Renewable Energy 3020 Implementation Plan announced in 2017 by the South Korean government, the electricity share of renewable energy will be expanded to 20% of the total electricity generation by 2030. Given the intermittency of electricity generation from renewable energy, realization of such a plan presents challenges to managing South Korea's isolated national electric grid and implies potentially large excess electricity generation in certain situations. The purpose of this study is: 1) to develop a model to accurately simulate the effects of excess electricity generation from renewables which would arise during the transition, and 2) to propose strategies to manage excess electricity generation through effective utilization of domestic electricity generating capabilities. Our results show that in periods of greater PV and wind power, namely the spring and fall seasons, the frequency of excess electricity generation increases, while electricity demand decreases. This being the case, flexible operation of coal and nuclear power plants along with LNG and pumped-storage hydroelectricity can be used to counterbalance the excess electricity generation from renewables. In addition, nuclear energy plays an important role in reducing CO₂ emissions and electricity costs unlike the fossil fuel-based generation sources outlined in the 8th Basic Plan.

• Korean Journal of Radiology
• /
• 제23권3호
• /
• pp.322-332
• /
• 2022

Objective: CT plays a central role in determining the resectability of pancreatic cancer, which directs the use of neoadjuvant therapy. This study aimed to assess the diagnostic accuracy of CT in predicting circumferential resection margin (CRM) involvement in patients with resectable or borderline resectable pancreatic head cancer. Materials and Methods: Seventy-seven patients who were scheduled for upfront surgery for resectable or borderline resectable pancreatic head cancer were prospectively enrolled, and 75 patients (38 male and 37 female; mean age ± standard deviation, 68 ± 11 years) were finally analyzed. The CRM status was evaluated separately for the superior mesenteric artery (SMA) and posterior and superior mesenteric vein/portal vein (SMV/PV) margins. Three independent radiologists reviewed the preoperative CT images and evaluated the resection margin status. The reference standard for CRM status was pathologic examination of pancreaticoduodenectomy specimens in an axial plane perpendicular to the axis of the second portion of the duodenum. The diagnostic accuracy of CT was assessed for overall CRM involvement, defined as involvement of the SMA or posterior margins (per-patient analysis), and involvement of each of the three resection margins (per-margin analysis). The data were pooled using a crossed random effects model. Results: Forty patients had pathologically confirmed overall CRM involvement in pancreatic cancer, while CRM involvement was not seen in 35 patients. For overall CRM involvement, the pooled sensitivity and specificity were 15% (95% confidence interval: 7%-49%) and 99% (96%-100%), respectively. For each of the resection margins, the pooled sensitivity and specificity were 14% (9%-54%) and 99% (38%-100%) for the SMA margin, 12% (8%-46%) and 99% (97%-100%) for the posterior margin; and 37% (29%-53%) and 96% (31%-100%) for the SMV/PV margin, respectively. Conclusion: CT showed very high specificity but low sensitivity in predicting pathological CRM involvement in pancreatic cancer.