• Journal of the Korean Solar Energy Society
• /
• v.34 no.1
• /
• pp.98-104
• /
• 2014

Photovoltaic (PV) cell is considered as one of the finest ways to utilize the solar power. A study of improving solar cell's efficiency is important because the lifetime of solar cell is determined by photovoltaic module technology. Therefore, oxidation (and/or corrosion) of solder materials will be one of the primary yield and long-term reliability risk factor. Recently, the development of lead-free solder alloy has been done actively about lead-free solder alloys of the thermodynamic and mechanical properties. However, the oxidation behavior have rarely been investigated In this study, the oxidations of 60 wt% Sn-40 wt% Pb, 62 wt% Sn-36 wt% Pb -2 wt% Ag, 50wt% Sn-48 wt% Bi-2 wt% Ag alloys for the interconnect ribbon after exposure in atmosphere at $100^{\circ}C$ for several times were investigated. The wettability of 62 wt% Sn-36 wt% Pb-2 wt% Ag and 50 wt% Sn-48 wt% Bi-2 wt% Ag solders was also studied to compare with that of 60 wt% Sn-40 wt% Pb alloy. The results howed that the zero cross time and the wetting time of 50 wt% Sn-48 wt% Bi-2 wt% Ag solder were better than other two samples. The surface of tested samples was analyzed by XPS. The XPS result showed that in all samples, SnO grew first and then the mixture of SnO and $SnO_2$ was detected. $SnO_2$ grew predominantly for the long time aging. Moreover XPS depth profile analysis has found surface enrichment of tin oxide.

• The Plant Pathology Journal
• /
• v.22 no.1
• /
• pp.75-89
• /
• 2006

The actinomycete strain JK-1 that showed strong inhibitory activity against some plant pathogenic fungi and oomycetes was isolated from Jung-bal Mountain in Ko-yang, Korea. The strain JK-1 produced spores singly borne on sporophores and the spores were spherical and 0.9-1.2 11m in diameter. The cell wall of the strain JK-1 contained meso-diaminopimelic acid. The actinomycete strain JK-1 was identified as the genus Micromonospora based on the morphological, physiological, biochemical and chemotaxonomic characteristics. From the 168 rDNA analysis, the strain JK-1 was assigned to M aurantiaca. The antibiotic MA-1 was purified from the culture broth of M aurantiaca JK-1 using various purification procedures, such as Diaion HP20 chromatography, C18 flash column chromatography, silica gel flash column chromatography and Sephadex LH-20 column chromatography. $^{1}H-$, $^{13}C-NMR$ and EI mass spectral analysis of the antibiotic MA-1 revealed that the antibiotic MA-1 is identical to phenylacetic acid. Phenylacetic acid showed in vitro inhibitory effects against fungal and oomycete pathogens Alternaria mali, Botrytis cinerea, Magnaporthe grisea, Phytophthora capsici and yeast Saccharomyces cerevisiae at < 100 $\mug$ $ml^{-1}$. In addition, phenylacetic, acid completely inhibited the growth of Sclerotinia sclerotiorum, Bacillus subtilis, Candida albicans, Xanthomonas campestris pv. vesicatoria at < $\mug$ $ml^{-1}$. Phenylacetic acid strongly inhibited conidial germination and hyphal growth of M grisea and C. orbiculare. Phenylacetic acid showed significantly high levels of inhibitory' effect against rice blast and cucumber anthracnose diseases at 250 $\mug$ $ml^{-1}$. The control efficacies of phenylacetic acid against the two diseases were similar to those of commercial compounds tricyclazole, iprobenfos and chlorothalonil .n the greenhouse.

• Journal of Hydrogen and New Energy
• /
• v.27 no.1
• /
• pp.114-120
• /
• 2016

This paper describes generating efficiency characteristics of the double acting Stirling engine/generator for domestic small-scale CHP (Combined Heat and Power) system. In small distributed generation applications, Stirling engine has competition from fuel cell, microturbine and etc. In order to be economical in the applications, a long life with minimum maintenance is generally required. Free piston Stirling engine (FPSE) has no crank and rotating parts to generate lateral forces and require lubrication. Double acting Stirling engine/generator has one displacer and two power piston which are supported by flexure springs. Two power pistons oscillate with symmetric displacement and are connected with moving magnet type linear generators for power generation from PV work. In experiments, 1 kW class double acting free piston Stirling engine/generator is fabricated and tested. Heat is supplied to hot end of engine by the combustion of natural gas and converted to electric power by linear generators which are assembled with power pistons. The electric parameters such as voltage, current and phase are measured with for variable flow rate of fuel gas. Especially, generating efficiency of FPSE is measured with three different measurement methods. Generating efficiency of the double acting Stirling engine/alternator is about 24%.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.127.1-127.1
• /
• 2011

In this paper, ZnO:Al thin films with c-axis preferred orientation were prepared on Soda lime glass substrates by RF magnetron sputtering technique. AZO thin film were prepared in order to clarify optimum conditions for growth of the thin film depending upon process, and then by changing a number of deposition conditions and substrate temperature conditions variously, structural and electrical characteristics were measured. For the manufacture of the AZO were vapor-deposited in the named order. It is well-known that post-annealing is an important method to improve crystal quality. For the annealing process, the dislocation nd other defects arise in the material and adsorption/decomposition occurs. The XRD patterns of the AZO films deposited with grey theory prediction design, annealed in a vacuum ambient($2.0{\times}10-3$Torr)at temperatures of 200, 300, 400 and $500^{\circ}C$ for a period of 30min. The diffraction patterns of all the films show the AZO films had a hexagonal wurtzite structure with a preferential orientation along the c-axis perpendicular to the substrate surface. As can be seen, the (002)peak intensities of the AZO films became more intense and sharper when the annealing temperature increased. On the other hand, When the annealing temperature was $500^{\circ}C$ the peak intensity decreased. The surface morphologies and surface toughness of films were examined by atomic force microscopy(AFM, XE-100, PSIA). Electrical resistivity, Gall mobility and carrier concentration were measured by Hall effect measuring system (HL5500PC, Accent optical Technology, USA). The optical absorption spectra of films in the ultraviolet-visibleinfrared( UV-Vis-IR) region were recorder by the UV spectrophotometer(U-3501, Hitachi, Japan). The resistivity, carrier concentration, and Hall mobility of ZnS deposited on glass substrate as a function of post-annealing.