• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.1-9
• /
• 2013

PURPOSES: The purpose of this study is to evaluate physical properties, durability, fatigue resistance, and long-term performance of poly-urethane concrete (PU) which can be possible application of thin layer on long-span orthotropic steel bridge and to check structural stability of bridge structure. METHODS : Various tests of physical properties, such as flexural strength, tensile strength, bond strength and coefficient of thermal expansion tests were conducted for physical property evaluation using two types of poly urethane concrete which have different curing time. Freezing and thawing test, accelerated weathering test and chloride ion penetration test were performed to evaluate the effect of exposed to marine environment. Beam fatigue test and small scale accelerated pavement test were performed to assess the resistance of PU against fatigue damage and long-term performance. Structural analysis were conducted to figure out structural stability of bridge structure and thin bridge deck pavement system. RESULTS: The property tests results showed that similar results were observed overall however the flexural strength of PUa was higher than those of PUb. It was also found that PU materials showed durability at marine environment. Beam fatigue test results showed that the resistances of the PUa against fatigue damage were two times higher than those of the PUb. It was found form small scale accelerated pavement test to evaluate long-term performance that there is no distress observed after 800,000 load applications. Structural analysis to figure out structural stability of bridge structure and thin bridge deck pavement system indicated that bridge structures were needed to increase thickness of steel deck plate or to improve longitudinal rib shape. CONCLUSIONS: It has been known that the use of PU can be positively considered to thin layer on long-span orthotropic steel bridge in terms of properties considered marine environment, resistance of fatigue damage and long-term performance.

• 한국분말재료학회지
• /
• 제27권6호
• /
• pp.490-497
• /
• 2020

The 3D printing process provides a higher degree of freedom when designing ceramic parts than the conventional press forming process. However, the generation and growth of the microcracks induced during heat treatment is thought to be due to the occurrence of local tensile stress caused by the thermal decomposition of the binder inside the green body. In this study, an alumina columnar specimen, which is a representative ceramic material, is fabricated using the digital light process (DLP) 3D printing method. DTG analysis is performed to investigate the cause of the occurrence of microcracks by analyzing the debinding process in which microcracks are mainly generated. HDDA of epoxy acrylates, which is the main binder, rapidly debinded in the range of 200 to 500℃, and microcracks are observed because of real-time microscopic image observation. For mitigating the rapid debinding process of HDDA, other types of acrylates PETA, PUA, and MMA are added, and the effect of these additives on the debinding rate is investigated. By analyzing the DTG in the 25 to 300℃ region, it is confirmed that the PETA monomer and the PUA monomer can suppress the rapid decomposition rate of HDDA in this temperature range.

• 접착 및 계면
• /
• 제23권4호
• /
• pp.137-143
• /
• 2022

본 연구에서는 신발 및 의류용 접착제로 접착력과 굴곡성이 우수한 폴리우레탄 아크릴레이트 수지를 합성하기 위하여 폴리에스테르 폴리올인 poly(tetramethylene adiphate glycol) (PTAd)와 폴리에테르 폴리올인 poly(tetramethylene ether glycol) (PTMG)를 4,4'-methylene diphenyl diisocyanate (MDI), isophorone diisocyanate (IPDI), 1,4-butandiol (1,4-BD), 2-ydroxyethyl methacrylate (2-HEMA), dibutyl amine (DBA)와 함께 사용하여 폴리우레탄 아크릴레이트를 합성하였으며, 폴리올을 병용한 폴리우레탄 아크릴레이트의 열적·기계적 특성, 접착력 및 굴곡성을 검토하였다. 합성된 폴리우레탄 아크릴레이트의 유리전이온도는 -70~-40 ℃ 범위로 확인되었으며, PTAd 함량이 증가함에 따라 유리전이온도, 분해온도, 인장강도, 접착력 및 내열성이 증가하였고 반대로 신장률, 내수성 및 굴곡성은 감소되었다. 합성된 폴리우레탄 아크릴레이트는 PTAd와 PTMG 비율이 5:5일 때 높은 접착력과 굴곡성을 나타내었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.426-428
• /
• 2007

A simple method is presented for fabricating micro/nanoscale combined hierarchical structures using a two-step UV-assisted capillary molding technique. This lithographic method consists of two steps: (i) fabrication of partially cured polymer microstructures using a PDMS mold and (ii) subsequent nanofabrication using a high-resolution polyurethane acrylate (PUA) mold on top of the pre-formed microstructures. Using this technique, various micro/nano hierarchical structures were fabricated with minimum resolution down to 70 nm over a large area with very good reproducibility.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.252-254
• /
• 2002

In this study, polyurethane acrylate macromer was synthesized and it was used in a gel polymer electrolyte, and then its electrochemical performances were evaluated. LiCoO$_2$/GPE/MCF cells were also prepared and their performances depending on discharge currents and temperatures were evaluated. ionic conductivity of the gel polymer electrolyte with PUA at room temperature and -20$^{\circ}C$ was ca. 4.5 x 10$\^$-3/ S/cm and 1.7${\times}$10$\^$-3/ S/cm, respectively. GPE was stable electrochemically up to 4.5 V vs. Li/Li$\^$+/. LiCoO$_2$/GPE/MCF cell showed a good high-rate and a low-temperature performance.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.239-245
• /
• 2010

Breathable waterproof PET fabrics were prepared by the UV coating of UV-curable polyurethaneacrylate(PUA) formulation mixed with polyethyleneglycol(PEG) as a water soluble pore former. The dispersed PEG in the UV-cured coating was extracted by warm water, which can generate individual circular pores uniformly distributed all over the coating instead of pore channels. Accordingly the moisture permeability of the microporously coated fabrics increased substantially with increasing PEG addition without significant reduction of hydrostatic pressure. Also the silicone diacrylate addition in the formulation was beneficial in increasing the hydrostatic pressure. The UV-based microporous coating can be an alternative to conventional thermal curing of solventborne polyurethane coating owing to the enhanced environment friendliness and energy saving.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.284-284
• /
• 2010

We report a fabrication of 6, 13-bis(triisopropylsilylethynyl) (TIPS) pentacene nanowires that made on Si substrates by liquid bridge-nanotransfer molding (LB-nTM) with polyurethane acrylate (PUA) mold. LB-nTM is based on the direct transfer of various materials from a stamp to a substrate via a liquid bridge between them. In liquid bridge-transfer process, the liquid layer serves as an adhesion layer to provide good conformal contact and form covalent bonding between the TIPS-pentacene nanowire and the Si substrate. The patterned TIPS-Pentacene nanowires have been investigated by Atomic force microscopy (AFM), Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM) and electrical properties.

• Korean Journal of Hydrosciences
• /
• 제2권
• /
• pp.115-126
• /
• 1991

The anaerobic digester with sludge from sewage treatment plant was operated in the laboratory for two year to investigate the enumeration and activity of methanogenic microorganisms. In this experimental study, the effects of HRT on the degradation characteristics of organic materials and on the number of methanogenic bacteria produced were investigated. By making the media with the repeated wxperiment, the number and activity of methanogenic bacteria were measured. The increase of the removal rate of organic acid in the digester was oberved at HRT of 2 days. The total number of methane forming bacteria estimated by the MPN method showed 2.3 $\times$ $ at HRT of 3 days, 7$\times$$ of 5 days and 7.9$\times$$ $/ml of 10 days. The optimum incubation time for measuring the number of methanogenic bacteria was found as more than four weeks. The PMA revealed 161ml CH$/l day at HRT of 10 days and the PUA 290mg COD/l day. At the incubation time 4.3 days, the maximum value of CH$ *59.1%) was found. At this time, $ was found as 15.3% and $ 25.6%.

• Applied Microscopy
• /
• 제50권
• /
• pp.26.1-26.3
• /
• 2020

The biocompatible polyurethane acrylate (PUA) nanopillars were fabricated by soft lithography using three different sizes of nanobeads (350, 500, and 1000 nm), and the human adipose-derived stem cells (hASCs) were cultured on the nanopillars. The hASCs and their various behaviors, such as cytoplasmic projections, migration, and morphology, were observed by high resolution images using a scanning electron microscope (SEM). With the accurate analysis by SEM for the controlled sizes of nanopillars, the deflections are observed at pillars fabricated with 350- and 500- nm nanobeads. These high-resolution images could offer crucial information to elucidate the complicated correlations between nanopillars and the cells, such as morphology and cytoplasmic projections.

• 한국가시화정보학회지
• /
• 제5권1호
• /
• pp.3-8
• /
• 2007

We present simple methods for fabricating high aspect-ratio polymer nanostructures on a solid substrate by rigiflex lithography with tailored capillarity and adhesive force. In the first method, a thin, thermoplastic polymer film was prepared by spin coating on a substrate and the temperature was raised above the polymer's glass transition temperature ($T_g$) while in conformal contact with a poly(urethane acrylate) (PUA) mold having nano-cavities. Consequently, capillarity forces the polymer film to rise into the void space of the mold, resulting in nanostructures with an aspect ratio of ${\sim}4$. In the second method, very high aspect-ratio (>20) nanohairs were fabricated by elongating the pre-formed nanostructures upon removal of the mold with the aid of tailored capillarity and adhesive force at the mold/polymer interface. Finally, these two methods were further used to fabricate micro/nano hierarchical structures by sequential application of the molding process for mimicking nature's functional surfaces such as a lotus leaf and gecko foot hairs.