• Korean Journal of Environmental Agriculture
• /
• v.24 no.3
• /
• pp.203-209
• /
• 2005

Objective of this research was to assess the effectiveness of the different sources of the zero-valent irons (ZVIs) on the reduction of the toxic Cr(VI) to the nonhazardous Cr(III) in an aqueous solution. The physical and chemical properties of the six ZVIs were determined. Particle size and specific surface area of the ZVIs were in the ranges of $85.55{\sim}196.46{\mu}m\;and\;0.055{\sim}0.091m^2/g$, respectively. Most of the ZVIs contained Fe greater than 98% except for J (93%) and PU (88%). Reduction efficiencies of the ZVI for Cr(VI) reduction were varied with kinds of ZVIs. The J and PU ZVIs reduced 100% and 98% of Cr(VI) in the aqueous solution, respectively, within 3 hrs of reaction. However, PA, F, Sand J1 reduced 74, 65, 29 and 11% of Cr(VI), respectively, after 48 hrs. The pH of the reacting solution was rapidly increased from 3 to $4.34{\sim}9.04$ within 3 hrs. The oxidation-reduction potential (Eh) of the reacting solution was dropped from 600 to 319 mV within 3 hrs following addition of ZVIs to the Cr(VI) contaminated water. The capability of ZVIs for Cr(VI) reduction was the orders of PU > J > PA > F > S > J1, which coincided with the capacities to increase the pH and decrease the redox potentials. Results suggested that the reduction of Cr(VI) to Cr(III) was derived from the oxidation of the ZVI in the aqueous solution.

• Journal of Science and Technology Studies
• /
• v.2 no.2 s.4
• /
• pp.1-23
• /
• 2002

This Article examines the main approaches to the public understanding of science(PUS) in light of the changing relation of science and public. Traditional approach called deficit model recognizes scientific knowledge as a entity, unidirectionally diffusing to public. This View basically presupposes the gap between science and public. Meanwhile, this approach has an aspiration to reduce the gap. So there is a paradoxical situation in the traditional PUS. Public perception of environmental crisis and risk of science has been risen since late 1980's. And the science technology studies (STS) have criticized traditional approach. STS proposes new approach of constructive PUS. Constructive PUS conceives the public to have heterogeneous, local characteristic. This approach has been very fertile both in theory and practice. But most recently, newly proposed approach, so called heterogeneous PUS, criticizes constructive PUS. Main point of criticism is that constructive PUS has dichotomy between science and public, and romanticizes the public. It is uncertain whether heterogeneous PUS can take place of constructive PUS. But this trend has the implication that the relation of science and public is constantly changing.

• Environmental Engineering Research
• /
• v.9 no.2
• /
• pp.75-87
• /
• 2004

• 대한방사선방어학회:학술대회논문집
• /
• 2011.11a
• /
• pp.256-257
• /
• 2011

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.348-350
• /
• 2001

Polyurethane(PU)은 내마모성, 내약품성, 내용제성이 좋으며 내노화성과 산소에 대한 안정성이 뛰어난 고분자로서 spandex를 비롯하여 코팅, 고무, 도료, 플라스틱, 복합재료 등의 여러 분야에서 이용되어지며 PU를 전기방사 하여 얻은 부직포는 wound dressing, anti-bacteria mask, 인조 피혁, stent 등에 이용할 수 있을 것으로 기대된다. (중략)

• 한국초전도학회:학술대회논문집
• /
• v.15
• /
• pp.3-3
• /
• 2005

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.41-47
• /
• 2016

High efficiency video coding (HEVC) employs a coding tree unit (CTU) to improve the coding efficiency. A CTU consists of coding units (CU), prediction units (PU), and transform units (TU). All possible block partitions should be performed on each depth level to obtain the best combination of CUs, PUs, and TUs. To reduce the complexity of block partitioning process, this paper proposes the PU mode skip algorithm with region of interest (RoI) selection using motion vector. In addition, this paper presents the CU depth level skip algorithm using the co-located block information in the previously encoded frames. First, the RoI selection algorithm distinguishes between dynamic CTUs and static CTUs and then, asymmetric motion partitioning (AMP) blocks are skipped in the static CTUs. Second, the depth level skip algorithm predicts the most probable target depth level from average depth in one CTU. The experimental results show that the proposed fast CU decision algorithm can reduce the total encoding time up to 44.8% compared to the HEVC test model (HM) 14.0 reference software encoder. Moreover, the proposed algorithm shows only 2.5% Bjontegaard delta bit rate (BDBR) loss.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.58-58
• /
• 2011

CNT 나노기술을 응용한 IT산업용 적층간지용 ESD(정전방전, Electrostatic Dissipation)PU 발포필름의 제조 가공기술 및 상품화 개발은 전자제품 패키지에 요구되는 쿠션성과 정전방전 기능을 갖는 폴리우레탄 발포 필름의 제조기술을 확립함으로써 가능 할 수 있다. 특히 IT산업용 필름제품이 개발되면 ESD 성능을 발휘하게 됨으로서 정전기 쇼크에 의한 각종 전자제품의 오작동이나 파손 방지가 가능하게 되어 포장재, 자동차, 전자제품의 하우징 등으로 사용될 수 있게 된다. 현재까지 ESD 기능을 부여하기 위해서 사용되는 충전재로는 금속섬유, 금속플레이크, 탄소섬유, 카본블랙 등이 있으며, 최근 탄소나노튜브를 응용한 연구가 많이 진행되고 있는데 탄소나노튜브는 직경이 수십nm, 종횡비 1000이상의 나노섬유형태로 서 전기전도성이 구리수준으로 알려져 있고 소량을 충전할 시 기계적 특성도 오히려 증대하는 장점을 가지고 있으며 전기적 특성으로는 상대적으로 낮은 나노튜브 함량에서는 ESD를 들 수 있고 높은 함량에서는 전자파 차폐성까지 기대되고 있다. 본 연구에서는 우수한 인장강도, 기계적 강도, 열적 안정성, 내약품성을 가지면서 습식 또는 용융공정을 통해 용이하게 시트, 필름, 코팅제를 제조할 수 있는 방수, 투습방수성을 가지는 유연재료인 폴리우레탄(PU) 1액형 PU에 MWNT 함량이 3wt%인 IPA/MWNT 분산용액을 PU 함량 대비 20, 30, 40파트로 함유시켜 $120^{\circ}C$에서 2분 건조시켜 제조한 그라운드 필름에 2액형 PU와 IPA/MWNT 분산용액에 발포제를 첨가하여 발포온도 140, 150, $160^{\circ}C$에서 5분간 건조시켜 시료 필름을 제조하였다. 제조된 필름의 전기전도성 측정은 부피저항과, 표면저항을 각각 측정하여 확인하였으며, 필름의 마찰 대전압은 E.S.T-7 마찰 대전압 시험기를 이용하여 표면 마찰 대전압과 반감기를 측정하여 확인하고, 필름의 물리적 특성은 인장시험기를 이용하여 breaking stress, breaking strain을 구하였다. 필름의 표면 특성은 영상 현미경 시스템을 사용하여 ${\times}1000$ 배율로 측정하여 분산특성과의 연관성을 확인하였다.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.8
• /
• pp.1044-1050
• /
• 2014

Since there is no consensus about the most reliable assays to detect invasive aspergillosis from samples obtained by minimally invasive or noninvasive methods, we compared the efficacy of an enzyme-linked immunosorbent assay (ELISA) for galactomannan (GM) detection and quantitative real-time PCR assay (qRT-PCR) for the diagnosis of invasive pulmonary aspergillosis. Neutropenic, male Sprague-Dawley rats (specific pathogen free; 8 weeks old; weight, $200{\pm}20g$) were immunosuppressed with cyclophosphamide and infected with Aspergillus fumigatus intratracheally. Tissue and whole blood samples were harvested on days 1, 3, 5, and 7 post-infection and examined with GM ELISA and qRT-PCR. The A. fumigatus DNA detection sequence was detected in the following number of samples from 12 immunosuppressed, infected rats examined on the scheduled days: day 1 (0/12), day 3 (0/12), day 5 (6/12), and day 7 (8/12) post-infection. The sensitivity and specificity of the qRT-PCR assay was 29.2% and 100%, respectively. Receiver operating characteristic curve (ROC) analysis indicated a Ct (cycle threshold) cut-off value of 15.35, and the area under the curve (AUC) was 0.627. The GM assay detected antigen in sera obtained on day 1 (5/12), day 3 (9/12), day 5 (12/12), and day 7 (12/12) post-infection, and thus had a sensitivity of 79.2% and a specificity of 100%. The ROC of the GM assay indicated that the optimal Ct cut-off value was 1.40 (AUC, 0.919). The GM assay was more sensitive than the qRT-PCR assay in diagnosing invasive pulmonary aspergillosis in rats.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1128-1135
• /
• 2019

In this study, different types of polyether amines and H₁₂MDI were used to synthesize water dispersed urea resins, which can be applied to coating material on the concrete slabs for bicycle road using the ordinary application equipments. The concentrations of several polyether amines with different molecular weights and the number of amine functionality were varied to set up the optimal condition for water dispersed urea resin preparation with both an excellent tensile strength and an elongation. In addition, the effect of DMPA[2,2-Bis(hydroxymethyl)propanoic acid] concentration on the storage stability of the water dispersed urea resin was also investigated. The formation of urea bonds from isocyanate and polyether amines was confirmed through FT-IR ATR spectroscopy. From the mechanical properties of urea resins, PU-4 and PU-6, which were prepared with both diamines and triamine of different molecular weights and number of functionality, showed the tensile strength of 10.5 N/㎟ and 12.7 N/㎟, respectively and the elongation of 1165 % and 969%, respectively. Among the water dispersed urea resin synthesized with different contents of DMPA, PU-6 showed the highest mechanical properties, a tensile strength of 14.2 N/㎟ and an elongation of 993%. In addition, the water dispersion state of this PU-6 was the most stable even after 8 weeks.