• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.544-547
• /
• 2002

According to the rising of national economic level. domestic consumption of vegetables having high additive values is increased continuously due to increased consumption of meat in last decade. These vegetables are produced almost in this country and are limited to import from neighbor countries in due of high transportation expenses for storing in refrigerated container. It is very important to mechanize the harvest work, forming more than 30% for their production cost, in order to cultivate variable vegetables at the same time according to their harvesting seasons. In this state its former harvest methods, with using of human power or semi-automatic harvest, caused to increase their production cost due to high labor cost and low working efficiency. The former onion harvest being operated almost by semi-automatic plant distributer mechanism have many limit and troublesome for cultivation spaces, vinyle mulched ridge, gravel mixture in soil. Therefore, it is necessary to develope a fully automatic and self-running situation and overcome above handicaps, even in the farm covered with vinyle house or mulch sheets. This newly developed onion harvest can be applied to plant various young trees and will be able to export together with onion haying their competition in the worldwide market in which the culinary vegetable method or farm conditions is similar to our country.

• Journal of Biosystems Engineering
• /
• v.26 no.4
• /
• pp.331-336
• /
• 2001

This study was to develop a kerosene flame weeder. An air compressor was driven though the PTO of a tractor to provide necessary air for fuel combustion and proper pressure to supply fuel from fuel tank to the nozzle. It was found that the flame was extinguished very easily by wind and vibration of the tractor. This trouble could be solved by attaching a burner cap, which is a modified venturi tube, at the end of the nozzle. The constructed flame weeder was tested for the weeding capability in the prepared field. Weed extinction rate and weight decrease rate were analysed. Measured maximum flame temperature was 1,121$\^{C}$ when the fuel consumption was 13.41 kg/h and fuel supply pressure was 88.2 kPa. The maximum temperature occurred at 20cm from the front end the burner, and it decreased to 46$\^{C}$ as the distance increased to 110cm. The flame length of up to 70cm, where the flame temperature was higher than 372$\^{C}$, would be used for weeding purpose. Weed extinction rate and weight decreasing rate increased as the fuel consumption increased. The flame weeder was evaluated to be a practical weeder through improvement as the weed extinction rate and weight decrease rate were analysed to be 75% and 85%, respectively when the fuel consumption was 116.87kg/ha.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.4
• /
• pp.488-503
• /
• 2012

The stern boat deployment system was investigated to evaluate the capability of launching and recovering rigid hull inflatable boat (RHIB) via the stern ramp. The main parameters to launch and recover RHIB were tested at the design stage. The combined hydrodynamic effect of the stern wake and the water jet flow made it difficult to maintain the maneuvering and sea-keeping ability of RHIB approaching to the stern ramp. The safe recovery course was proposed to maintain the directional control of RHIB and to reduce the combined hydrodynamic effect in the transom zone. To evaluate the feasibility of RHIB recovery, the stern sill depth was measured in various conditions and the ramp availability time was obtained. Also, the experimental percent time operability (PTO) test was performed by the number of successive launching and recovering operations.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.2
• /
• pp.46-50
• /
• 2016

When rotating the clutch drum in the power take-off (PTO) gear box of an armored recovery vehicle, lots of inner oil is drained through the adapter by centrifugal force. Therefore, a lack of lubrication is caused by inner oil loss, and the bearing is damaged by overheating. This study, therefore, aims to design an oil-controlling adapter by using shape alteration to prevent oil loss. Both the original and improved adapters were tested at 1,800rpm by using an operational test machine. When applying the original adapter to the gear box, the bearing was damaged by overheating, which was caused by the lack of lubrication. When applying the improved oil-controlling adapter, on the other hand, it prevented the loss of inner oil. Applying the improved adapter is expected to prevent the overheating caused by lack of lubrication.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.4
• /
• pp.739-749
• /
• 2015

A new conceptual dual-buoy Wave Energy Converter (WEC) for the enhancement of energy extraction efficiency is suggested. Based on actual wave data, the design process for the suggested WEC is conducted in such a way as to ensure that it is suitable in real sea. Actual wave data measured in Korea's East Sea (position: $36.404N^{\circ}$ and $129.274E^{\circ}$) from May 1, 2002 to March 29, 2005 were used as the input wave spectrum for the performance estimation of the dual-buoy WEC. The suggested WEC, a point absorber type, consists of two concentric floating circular cylinders (an inner and a hollow outer buoy). Multiple resonant frequencies in proposed WEC affect the Power Ttake-off (PTO) performance of the WEC. Based on the numerical results, several design strategies are proposed to further enhance the extraction efficiency, including intentional mismatching among the heave natural frequencies of dual buoys, the natural frequency of the internal fluid, and the peak frequency of the input wave spectrum.

• Journal of Biosystems Engineering
• /
• v.25 no.4
• /
• pp.257-264
• /
• 2000

A tractor attached TMR(model 430) mixer has been developed in a previous study. However, the mixer was found to be improved through field applications in its capacity, manufacturing cost, ergonomic design and power-train requirement. The TMR mixer was modified into a model TMR500, approved by Institute of Agricultural Mechanization, as follows : 1. Roughage cutting system was seperated from the mixer, resulting in the 33% reduction of manufacturing cost. 2. Enlarged hopper capacity enabled to feed 60 heads at a batch. 3. Hydraulically controlled gate system saved ergonomic man power. 4. Power transmission system was changed from a chain-sprocket system(27:1) to the gear-train reduction system(38.6:1) to satisfy the recommended use of 540rpm PTO input.

• Ocean Systems Engineering
• /
• v.2 no.4
• /
• pp.297-314
• /
• 2012

Power-take-off through inner dynamic system inside a floating buoy is suggested. The power take-off system is characterized by mass, stiffness, and damping and generates power through the relative heave motion between the buoy and inner mass (magnet or amateur). A systematic hydrodynamic theory is developed for the suggested WEC and the developed theory is illustrated by a case study. A vertical truncated cylinder is selected as a buoy and the optimal condition of the inner dynamic system for maximum PTO (power take off) through double resonance for the given wave condition is systematically investigated. Through the case study, it is seen that the maximum power can actually be obtained at the optimal spring and damper condition, as predicted by the developed WEC theory. However, the band-width of high performance region is not necessarily the greatest at the optimal (maximum-power-take-off) condition, so it has to be taken into consideration in the actual design of the WEC.

• The Journal of Korean Physical Therapy
• /
• v.33 no.5
• /
• pp.217-223
• /
• 2021

Purpose: This study sought to identify the effects of coordinative locomotor training (CLT) using elastic bands on the flexibility and body alignment of right-handed baseball players in elementary school. Methods: The subjects were 20 instructed right-handed baseball players in elementary school. They were classified into the experimental group with 10 players (n=10) to be given coordinative locomotor training using elastic bands and the control group with 10 players (n=10). Flexibility was measured by the sit and reach exercise. Body alignment was measured using formetric 4D method to measure the trunk imbalance angle (TI), trunk torsion angle (TT), pelvic tilt angle (PTi), pelvic torsion angle (PTo), pelvic rotation angle (PR), kyphotic angle (Ky), and lordotic angle (Lo). Results: There was a significant increase in the flexibility within the experimental group (p<0.05). after the intervention. There was also a significant increase in the difference between the experimental group and the control group (p<0.05). There was a significant decrease in PR during body alignment in the experimental group after intervention (p<0.05). An analysis of the differences between groups showed a significant decrease in the PR of the experimental group compared to the control group (p<0.05). Conclusion: These findings show that coordinative locomotor training using elastic bands would be effective for enhancing the flexibility and pelvic rotation of elementary school right-handed baseball players.

• Ocean Systems Engineering
• /
• v.8 no.4
• /
• pp.361-380
• /
• 2018

The dynamic performance of the wave energy converter (WEC) rotor with different geometric parameters such as depth of submergence and beak angle has been assessed by considering the linear potential flow theory using WAMIT solver and along with the computational fluid dynamics (CFD). The effect of viscous damping is incorporated by conducting numerical free decay test using CFD. The hydrodynamic coefficients obtained from the WAMIT, viscous damping from the CFD and estimated PTO damping are used to solve the equation of motion to obtain the final pitch response, mean optimal power and capture width. The viscous damping is almost 0.9 to 4.6 times when compared to the actual damping. It is observed that by neglecting the viscous damping the pitch response and power are overestimated when compared to the without viscous damping. The performance of the pitch WEC rotor in the Jeju western coast at the Chagwido is analyzed using Joint North Sea Wave Project (JONSWAP) spectrum and square-root of average extracted power is obtained. The performance of WEC rotor with depth of submergence 2.8 m and beak angle $60^{\circ}$ found to be good compared to the other rotors.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.3
• /
• pp.115-121
• /
• 2021

PURPOSE: This study analyzed the correlation between the plantar pressure and body alignment according to the dominant hand of elementary school baseball players. METHODS: The subjects consisted of 32 elementary school baseball players. The 32 players were classified in the right-hand dominant group (Rt. Group, n = 22) and left-hand dominant group (Lt. group, n = 10). The plantar pressure was measured using a pedoscan to determine the maximum pressure and pressure distribution. The body alignment was measured using a fometric 4D to measure the trunk imbalance angle (TI), pelvic tilt angle (PTi), pelvic torsion angle (PTo), pelvis rotation angle (PR), kyphotic angle (Ky), lordotic angle (Lo), and trunk torsion angle (TT). RESULTS: Participants showed correlations in the Rt. group, according to the left maximum pressure, Lo (r = .592, p < .05), and TT (r = .514, p < .05); according to the right maximum pressure, PR (r = .539, p < .05), and Lo (r = .503, p < .05). In the left pressure distribution, the PR (r = -.521, p < .05) showed a negative correlation. In the Lt. group, the PT (r = -.591, p < .05) showed a negative correlation in the left pressure distribution. CONCLUSION: These results can be used as basic data for a body analysis study of elementary school baseball players in the future.