• Bulletin of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.281-285
• /
• 2010

Hemodialysis vascular access dysfunction (HVAD) due to the aggressive development of venous neointimal hyperplasia remains a major complication for patients with synthetic arteriovenous grafts. Paclitaxel-coated expanded polytetrafluoroethylene (ePTFE) grafts effectively prevent neointimal hyperplasia and stenosis. However, perigraft inflammation or edema can be another complication of ePTFE grafts, preventing early cannulation. Three different types of ePTFE grafts, including grafts without paclitaxel coating (control group, n = 12), grafts with paclitaxel coating at a dose density of $0.61ug/mm^2$ (low concentration group, n = 12), and grafts with paclitaxel coating at a dose density of $1.15ug/mm^2$ (high concentration group, n = 12) were placed in the backs of 12 rabbits, simultaneously. Six rabbits were euthanized after one week and the remaining six were euthanized two weeks after implantation. Perigraft inflammation, graft wall inflammation, stromal cell proliferation, blood vessel formation, tissue necrosis and edema were analyzed for the grafts in each animal. Inflammation surrounding the paclitaxel-coated grafts was significantly reduced compared to the control group. Stromal cell layers were detected at the interface between the graft and the surrounding tissue in the control group, infiltrated into the graft interstices, and differentiated into myofibroblasts for graft healing. Paclitaxel-coated grafts inhibited stromal cell proliferation and infiltration into the graft wall. Tissue necrosis and edema were not detected in either of the paclitaxel-coated graft groups.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.508-513
• /
• 2021

In order to improve the durability of a proton exchange membrane fuel cells (PEMFC), it is essential to improve the durability of the polymer membrane. In order to improve the durability of the membrane, an e-PTFE support and a radical scavenger are added. In this study, the chemical durability of the reinforced membrane with ePTFE support and the non-reinforced membrane was compared by Fenton reaction. In the Fenton experiment of the polymer membrane without the addition of a radical scavenger, the absorption rate of hydrogen peroxide solution and iron ions through the cross section of the specimen cut into small pieces was higher in the reinforced membrane, so that the fluorine outflow concentration was higher. According to the type and amount of radical scavenger added, the fluorine outflow concentration of the reinforced membrane has a large difference of more than 3 times, indicating that the effect of the radical scavenger was stronger than that of the support.

• The Journal of Korean Medicine
• /
• v.18 no.1
• /
• pp.316-325
• /
• 1997

The dried unripe fruit of Poncirus trifoliata L. is widely used to treat urticaria, itch and indigestion in folk medicine. And recently it was reported the component of the fruit was found to exhibit an inhibitory effect on histamine release from mast cells. So to evaluate the effect of aqueous extract of Poncirus trifoliata L.(PTFE) on compound 48/80-induced histamine release, the study was carried out in rat peritoneal mast cell. PTFE $(10^{-3}{\sim}1mg/ml)$ inhibits the histamine release induced by compound 48/80 $(5{\mu}g/ml)$ in rat peritoneal mast cells. To clarify the mechanism of these inhibition, we investigated the effect of PTFE on cAMP and intracellular calcium content. The increase in cAMP content, when PTFE was added, was transient. At concentration of 1mg/ml, the cAMP content of mast cells was significantly increased at a rate of 53 times of basal cells at 10sec. PTFE inhibits histamine release by augmenting the cAMP content in mast cells. Moreover, PTFE inhibits intracellular calcium release induced by compound 48/80. This result suggests that PTFE may be useful for the prevention and treatment of allergy-related disease.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.5
• /
• pp.353-358
• /
• 2011

In this study, ammonia removal characteristics in membrane contactor system under various operating conditions were evaluated. The mass transfer coefficient was used to quantitatively compare the effect of various operation conditions on ammonia removal efficiency. Effective removal of ammonia was possible with the tubular PTFE membrane contactor system at all tested conditions. Among the various operation parameters, contact time and solution pH showed significant effect on ammonia removal mechanism. Overall ammonia removal rate was not significantly affected by influent suspended solution concentration unlike other pressure driven membrane filtration processes. Also the osmotic distillation phenomena which deteriorate the mass transfer efficiency can be minimized by preheating of strip solution. Membrane contactor system can be a possible alternative to treat high strength nitrogen wastewater by optimizing operation conditions such as stripping solution flow rate, influent wastewater temperature, and influent pH.

• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.230-239
• /
• 1992

Nickel was used as a catalyst for the hydrogen electrode in alkaline fuel cell. The optimum electrolyte concentration and recommendable operating temperature identified from polarization curves were 6N KOH and $80^{\circ}C$, respectively. Comparing the conductivity, apparent porosity and current density at porous hydrogen electrode manufactured with various PTFE additions, the proper content of PTFE was 10wt%. Chemisorption was carried out to define the appropriate surface area. The electrode produced with 10wt% of PTFE and sintered at $340^{\circ}C$ showed more than $200mA/cm^2$ of current density. The morphology of electrode surface was investigated with SEM. Cold pressing, hot pressing, rolling and calendering methods were carried out for manufacturing the electrode, and electrochemical characteristics for each method was studied.

• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.293-298
• /
• 2014

We prepared hydrophilic porous supporters for the reinforced composite fuel cell membrane by radiation grafting of acrylonitrile (AN) and hydrophilic sodium allylsulfonate (SAS) into a porous polytetrafluoroethylene (PTFE) supporter. The physicochemical properties of the supporters prepared under various reaction conditions such as molar ratio of SAS/AN, monomer concentration, and irradiation dose were evaluated. FTIR was utilized to confirm the successful introduction of SAS/AN copolymer chains into the porous PTFE. The pores of the porous PTFE film were found to be decreased with an increase in the degree of grafting by using FE-SEM and gurley number. Furthermore, by analyzing the degree of grafting, contact angle, and TBO (toluidine blue O) uptake, the hydrophilicity of the prepared supporters was found to increase with an increase in the degree of grafting.

• Membrane Journal
• /
• v.33 no.4
• /
• pp.201-210
• /
• 2023

Dust filter membranes play a crucial role in human life and various industries, as they contribute to several important aspects of human health, safety, and environmental protection. This study presents the development of a polysulfone@polyphenylene sulfide/polytetrafluoroethylene (PSf@PPS/ePTFE) composite dust filter membrane with excellent thermal stability and adhesion properties for high-temperature conditions. FT-IR analysis confirms successful impregnation of PSf adhesive onto PPS fabric and interaction with ePTFE support. FE-SEM images reveal improved fiber interconnection and adhesion with increased PSf concentration. PSf@PPS/ePTFE-5 exhibits the most suitable porous structure. The composite membrane demonstrates exceptional thermal stability up to 400℃. Peel resistance tests show sufficient adhesion for dust filtration, ensuring reliable performance under tough, high-temperature conditions without compromising air permeability. This membrane offers promising potential for industrial applications. Further optimizations and applications can be explored.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.1
• /
• pp.95-106
• /
• 2011

Even though MBR processes have many advantages such as high quality effluents, a small footprint and convenience for operation compared to conventional activated sludge processes, there are some shortcomings in terms of the cost and potential fouling incident that keeps MBR (Membrane bioreactor) processes from being widely applied. To reduce these problems, PTFE (Polytetrafluoroethylene) flat sheet membranes that have excellent permeability and durability were tested instead of PVDF (Polyvinylidene fluoride) membrane which is being used widely in water treatment. Low concentration of sodium hydroxide (NaOH) was also added into the membrane modules in order to prevent the membrane fouling as well as to provide the alkalinity. With conditions mentioned above, a pilot-scale MBR system based on the MLE (Modified Ludzack Ettinger) process was operated at flux of 40 $L/m^{2}/hr$ and over 15,000 mg/L MLSS concentration for about 8 months. And coagulant(alum) was added into the membrane tank to remove phosphorus. Although the more coagulant is added the more effectively phosphorus is removed, that can lead to fouling for a long operation(Ronseca et al.,2009). By the way there is a research that fouling grow up after stopping injection of coagulant(Holbrook, 2004). Stable operation of MBR systems was achieved without major chemical cleaning and the effluent quality was found to be good enough to comply with the treated waste water quality regulations of the Korea.

• Membrane Journal
• /
• v.16 no.4
• /
• pp.259-267
• /
• 2006

The critical breakthrough pressure through both porous PVDF (polyvinylidenefluoride) and PTFE (poly-tetrafluoroethylene) was measured using pure water, $0.1M{\sim}4.0M$ NaOH aqueous solutions and $0.1M{\sim}3.0M\;NaHSO_3$ aqueous solutions. The critical breakthrough pressure through PTFE was observed to be higher than that through PVDF membrane at the same pore size. The critical breakthrough pressure decreased as the molar concentration of NaOH increased up to 1.0 M reaching the minimum and then increased further after 1.0 M NaOH up to 4.0 M NaOH. On the other hand, the critical breakthrough pressure measured using $NaHSO_3$ aqueous solutions was decreased with increasing the concentration of $NaHSO_3$. The critical breakthrough pressure could be well interpreted with Cantor's equation.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.2
• /
• pp.76-82
• /
• 2005

In this paper, a method for analyzing the thermal recovery characteristics of the nozzle of gas circuit breaker was described. In order to obtain thermal recovery characteristics, the transient simulation of SF6 arc plasma within the nozzle was carried out. In particular, the nozzle ablation was taken into account by simultaneously solving the PTFE concentration equation with the governing equations such as continuity, momentum and energy equation. After that, post arc current calculation was performed with the rate of rise of recovery voltage changed. From the calculated post arc current, it was possible to suggest the thermal recovery characteristics of the nozzle of gas circuit breaker.