• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권1호
• /
• pp.120-128
• /
• 2017

This paper describes a neural stimulation system that employs an inductive coupling link to transfer power and data wirelessly. For the reliable data and power delivery, a self-referenced amplitude-shift keying (ASK) demodulator and a wide-range voltage regulator are suggested and implemented in the proposed stimulator system. The prototype fabricated in 0.35 um BCD process successfully transferred 1.2 Kbps data bi-directionally while supplying 4.5 mW power to internal MCU and stimulation block.

• International Journal of Concrete Structures and Materials
• /
• 제1권1호
• /
• pp.45-55
• /
• 2007

Ten beams bonded with glass fiber reinforced polymer (GFRP) laminates were tested under cyclic loading with the load range and the FRP reinforcement ratio as test parameters. The maximum load level during cyclic loading was 55%, 65% and 75% of the static flexural strength while the minimum load level was kept constant at 35%. Deflections of the beams at the end of 525000 cycles were found to increase by 16% and 44% when the maximum load level was increased from 55% to 65% and 75% of the static flexural strength, respectively. Beams with FRP reinforcement ratios of 0.64% and 1.28% were found to exhibit lesser deflections of about 15% and 20%, respectively, compared to a similar beam without FRP reinforcement. An analytical approach based on cycle-dependent effective moduli of elasticity of concrete and FRP reinforcement is presented and found to predict the deflections of the test beams well.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.520-529
• /
• 2006

그 동안 몇 차례 오스터버그 셀$(O-cell^{\circledR})$을 이용한 양방향 말뚝 재하시험기법이 국내에 성공적으로 소개/적용된 바 있다. 이 방법은 상대적으로 새롭고 독특한 방법으로서 시험비용과 기존 재래적인 시험방법이 적용상 제한을 받는 경우나 대규모 시험에서 발생할 수 있는 문제점들을 극복할 수 있다. 국내에서는 설계목적을 위한 시험말뚝 뿐 아니라 설계하중이 큰 실제말뚝에 대한 시험이 증가하는 추세에 있다. 이 논문에서 소개하는 양방향 재하시험 방법을 적용하면 기존의 소규모 재하시험 방법에서 발생될 수 있는 주면 마찰력과 선단지지력의 분리측정이나 각각의 지지력에 대한 극한상태를 확인하지 못하는 한계를 극복할 수 있고 시험하중이 270MN을 초과하는 경우까지 적용할 수 있는 장점을 갖고 있다. 본 논문에서는 오스터버그 셀을 이용한 정적 재하시험 방법에 대하여 말뚝종류별로 상세히 기술하였으며 이 시험방법의 장점과 국내현장에 적용되었던 사례를 소개하였다.

• 한국터널지하공간학회 논문집
• /
• 제17권6호
• /
• pp.587-596
• /
• 2015

Recent years have shown great advances in the feasibility of long subsea tunnels. Projects such as the Channel Tunnel, the Stoerebelt Tunnel or the Bosporus Crossing have pushed the boundaries of TBM tunneling technology and fueled the work on feasibility studies for even more challenging projects such as crossing the Qiongzhou or Gibraltar Straits. There are numerous geotechnical challenges such as wide variations of ground conditions, high operation pressures or long tunnel distances and finally geological uncertainties which must be solved in order to attempt such projects. Several operational challenges such as large muck quantities interventions under difficult conditions and long transport distances also have to be tackled. TBM manufacturer and construction industry have developed a number of approaches to these challenges which point into the right technical direction and have been proven successfully in recent experiences. Their further development will allow attempting several megaprojects which are currently under discussion.

• 산업경영시스템학회지
• /
• 제32권1호
• /
• pp.79-84
• /
• 2009

In this paper, a best-first branch and bound algorithm based upon the bottom-up approach for the unweighted unconstrained two-dimensional cutting problem is proposed to find the optimal solution to the problem. The algorithm uses simple and effective methods to prevent constructing duplicated patterns and reduces the searching space by dividing the branched node set. It also uses a efficient bounding strategy to fathom the set of patterns. Computational results are compared with veil-known exact algorithms and demonstrate the efficiency of the proposed algorithm.

• 한국유기농업학회지
• /
• 제23권4호
• /
• pp.615-641
• /
• 2015

This study analyzes an economic efficiencies of apples, pears, and grapes farming. We evaluate an annual economic overall efficiency (OE), allocative efficiency (AE), technology efficiency (TE), pure technology efficiency (PTE), and scale efficiency (SE) using data envelopment analysis (DEA). We also measure returns to scale of farms, and the change of technical efficiency of frontier farms. Lastly we estimate the effects of some explanatory variables on allocative, pure technical, and scale efficiencies.

• 한국유기농업학회지
• /
• 제25권4호
• /
• pp.679-697
• /
• 2017

This study analyzes an economic efficiency of environmental friendly farm and conventional farm using the data envelopment analysis (DEA). We compare the economic efficiency of Environmental Friendly farm and Conventional farm. We also analyze the effects of some explanatory variables on allocative efficiency (AE), pure technology efficiency (PTE) and scale efficiency (SE). In the case of strawberries farm, environmental friendly farm has higher overall efficiency (OE) than conventional farm. But tomatoes farm has higher overall efficiency (OE) than conventional farm. And We measure returns to scale of farms. Most strawberries and tomatoes farms showed Increasing to Scale (IRS).

• Journal of Applied Biological Chemistry
• /
• 제60권3호
• /
• pp.207-211
• /
• 2017

It is introduced an outstanding book about an important topic in occupational and environmental sciences i.e., the opportunities and challenges that may be connected with increasing the use and distribution of rare earth elements. These chemically similar elements, comprising the lanthanides, scandium, and yttrium, are involved in a number of essential technological applications, and their effects raise a number of human health issues of relevance to the occupational and environmental sciences. The book that I introduced here, "Rare Earth Elements in Human and Environmental Health; At the Crossroads between Toxicity and Safety" edited by Giovanni Pagano (Pan Stanford Publishing Pte. Ltd., Temasek Boulevard, Singapore) represents a break from that situation. It is essential to increase our knowledge about the environmental fate and biological effects of these technologically important metals in order to prevent unforeseen long-term man-made consequences to human health. This book is likely to become an important resource for scientists, engineers, and decision makers who understand the need for sensible exploitation of this resource.

• Structural Engineering and Mechanics
• /
• 제35권6호
• /
• pp.699-715
• /
• 2010

This paper investigates the structural responses of axially restrained steel beams under fire conditions by a nonlinear finite element method. The axial restraint is represented by a linear elastic spring. Different parameters which include beam slenderness ratio, external load level and axial restraint ratio are investigated. The process of forming a mid-span plastic hinge at the mid-span under a rising temperature is studied. In line with forming a fully plastic hinge at mid-span, the response of a restrained beam under rising temperature can be divided into three stages, viz. no plastic hinge, hinge forming and rotating, and catenary action stage. During catenary action stage, the axial restraint pulls the heated beam and prevents it from failing. This study introduces definitions of beam limiting temperature $T_{lim}$, catenary temperature $T_{ctn}$ and warning time $t_{wn}$. Influences of slenderness ratio, load level and axial restraint ratio on $T_{lim}$, $T_{ctn}$ and $t_{wn}$ are examined.

• The Korean Journal of Ecology
• /
• 제11권3호
• /
• pp.153-173
• /
• 1988

The structure of vegetation of Mt. Cheomchal, Jindo-gun, Chollanamdo were surveyed from 1985 to 1987. The vascular plants was listed 785 taxa classified into 680 speciesm 1 subspecies, 95 varieties, 9 forma, 484 genera, 139 families, and 42 orders. The floral data showed the ecological characteristics such as the value 1.71 in Pte-Q and N-$D_1-R_5-$e in biological type. Vegetation of Mt. Cheomchal is classified into 8 communities: Quercus salicina community, Castanopsis cuspidata var. sieboldii community, Quercus acuta community, and Camellia japonica community as evergreen broad-leaved forest, Quercus variabilis Pinus densiflora community, Carpinus coreana community and Carpinus tschonoskii-quercus variabilis community as deciduous broad-leaved forest, and Pinus densiflora community as pine forest.