• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.05a
• /
• pp.3-5
• /
• 1993

It is very important that a spectrum of reflectance is in accord wi th a spectrum of absorbance for a effective heating. Therefore. the objective of this study was to achieve a technical composite for material plan which PTC thermistor increase a radiation property of far-infrared and keep a characteristic of R-T The Ceramic speciman studies had the composition $BaTiO_3$ with additive of 1.67 $Al_2O_3$, 3.75 $SiO_2$, 1.25 $TiO_2$, 0.15 $Sb_2O_3$ and 0.00-0.182 $MnO_2$. $MnO_2$ amounts of additives was both increase on the anomalous resistivity-temperature characteristics and high efficiency on the radiation properties bodies of far-infrared. This result shows that specimens produced high emissivity(average 0.8) of far-infrared at 4.5-15$[{\mu}m]$ by measuring a characteristic of IR and R-T.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.104-106
• /
• 1995

A curious resistivity anomaly in high curie point barium-lead-titanate materials with positive temerature coefficient of resistivity (PTCR) has been observed just below the curie point, besides the normal PTCR anomaly. The additional resistivity anomaly was observed in the resistivity-temperature characteristics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.209-209
• /
• 2008

$BaTiO_3$는 대표적인 강유전체 재료로서 적층형 세라믹 콘덴서 (MLCC), PTC thermistor, resonator 등 다양한 분야에서 사용되고 있다. $BaTiO_3$ 기본조성으로 하는 PTC 써미스터는 온도가 올라감에 따라 저황이 높아지는 특성을 가지고 있으며, 이러한 PTCR 특성은 작동되는 큐리온도에 따라 그 적용이 달라진다. PTCR 소자는 소결온도, 소결분위기, 불순물, 첨가제 등의 제조공정상의 인자들과 기공률, 결정립 크기 등이 복합적으로 작용해 PTCR 특성에 영향을 미치기 때문에 제조하기에 무척 까다로운 소자로 알려져 있다. 하지만 우수한 특성을 지닌 PTCR 소자를 제조하기 위하여 새로운 조성개발이 이루어지고 있으며, 전기적 특성 개선, 재현성 확보, 제조원가 절감 등의 측면에서 새로운 공정개발이 이루어지고 있다. 본 연구에서는 Sm을 첨가한 $BaTiO_3$계 재료의 PTCR 특성에 미치는 Ti/Ba ratio 등의 변화에 따른 영향을 조사하고 공기 중과 환원분위기 중에서 소결된 시편의 차이점과 재산화 처리에 따른 PTC 특성에 미치는 영향을 R-T 측정으로 고찰하였다. 본 조성은 환원 분위기에서 소결할 경우 그 미세구조는 Ti/Ba ratio비가 높을 때 grain size가 커져 상온 비저항을 낮출 수 있었다. Sm 첨가로 상온 비저항값은 낮출 수 있었으나 공기 중에서 재산화 처리하더라도 jumping ratio$(R_{max}/R_{25^{\circ}C})$는 Ti/Ba ratio와 거의 무관한 것으로 분석되었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.35-36
• /
• 2008

PTC thermistor are characterized by an increase in the electrical resistance with temperature. The PTC materials of middle Curie point were produced or that of high Curie point (above $200^{\circ}C$), it was determined that compositional modifications of $Pb^{2+}$ for $Ba^{2+}$ produce change sin the Curie point to higher temperature. PTC ceramic materials with the Curie point above $120^{\circ}C$ were prepared by adding $PbTiO_3$, PbO or $Pb_3O_4$ into $BaTiO_3$. Thereby, adding $Pb^{2+}$ into $BaTiO_3$-based PTC material to improve Tc was studied broadly, however, weal know that PbO was poisonous and prone to volatilize, then to pollute the circumstance and hurt to people, so we should dope other innocuous additives instead of lead to increase Tc of composite PTC material. In order to prepare lead-free $BaTiO_3$-based PTC with middle Curie point, the incorporation on $Bi_{1/2}K_{1/2}TiO_3$ into $BaTiO_3$-based ceramics was investigated on samples containing 0, 1, 2, 3, 4, and 50mol% of $Bi_{1/2}K_{1/2}TiO_3$. $Bi_{1/2}K_{1/2}TiO_3$ was compounded as standby material by conventional solid-state reaction technique. The starting materials were $Bi_2O_3$, $K_2CO_3$, $BaCO_3$ and $TiO_2$ powder, and using solid-state reaction method, too. The microstructures of samples were investigated by SEM, DSC, XRD and dielectric properties. Phase composition and lattice parameters were investigated by X-ray diffraction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.57-58
• /
• 2008

PTC thermistor are characterized by an increase in the electrical resistance with temperature. The PTC materials of middle Curie point were produced or that of high Curie point (above $200^{\circ}C$), it was determined that compositional modifications of $Pb^{2+}$ for $Ba^{2+}$ produce change sin the Curie point to higher temperature. PTC ceramic materials with the Curie point above $120^{\circ}C$ were prepared by adding $PbTiO_3$, PbO or $Pb_3O_4$ into $BaTiO_3$. Thereby, adding $Pb^{2+}$ into $BaTiO_3$-based PTC material to improve Tc was studied broadly, however, weal know that PbO was poisonous and prone to volatilize, then to pollute the circumstance and hurt to people, so we should dope other innocuous additives instead of lead to increase Tc of composite PTC material. In order to prepare lead-free $BaTiO_3$-based PTC with middle Curie point, the incorporation on $Bi_{1/2}Na_{1/2}TiO_3$ into $BaTiO_3$-based ceramics was investigated on samples containing 0, 1, 2, 3, 4, and 50mol% of $Bi_{1/2}Na_{1/2}TiO_3$. $Bi_{1/2}Na_{1/2}TiO_3$ was compounded as standby material by conventional solid-state reaction technique. The starting materials were $Bi_{1/2}Na_{1/2}TiO_3$, $BaCO_3$, $TiO_2$ and $Y_2O_3$ powder, and using solid-state reaction method, too. The microstructures of samples were investigated by SEM, DSC, XRD and dielectric properties. Phase composition and lattice parameters were investigated by X-ray diffraction.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.115-120
• /
• 2008

The thermistors and AD590 are widely used for temperature measurement in space application. The resistance of thermistor will vary according to the temperature variation therefore the external voltage or current stimulus signal have to be provided to measure resistance variation. Recently high resolution electro optic camera system of satellite requires tight thermal control of the camera structure to minimize the thermal structural distortion which can affects the image quality. In order to achieve $1^{\circ}$(deg C) thermal control requirement, the accuracy of temperature measurement have to be higher than $0.3^{\circ}$(deg C). In this paper, the accuracy of temperature measurement using thermistors is estimated and analyzed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.157-157
• /
• 2009

$BaTiO_3$를 기본조성으로 하는 PTC 써미스터는 Curie 온도이상에서 저항이 급격히 상승하는 반도성 전자세라믹스로서 degaussing 소자, 정온 발열체, 온도센서, 전류 제한 소자 등 상업적으로 폭넓게 사용되고 있다. 본 소자는 소결온도, 소결 및 열처리 분위기, 불순물, 첨가제 등의 제조공정상의 인자들과 기공률, 결정립 크기 등이 복합적으로 작용하여 PTCR 특성이 크게 영향을 받기 때문에 제조하기에 무척 까다로운 소자로 알려져 있다. 특히 과전류 보호 소자용으로 사용하기 위해서는 상온 비저항을 크게 낮추어야 하며 이에 대한 연구가 계속 진행되고 있다. 따라서 본 연구에서는 SiO2을 0.5~10 at%로 달리한 조성으로 환원 분위기에서 소결하고 공기 중에서 재산화 처리하여 재료의 PTC 특성에 어떠한 영향을 미치는지 분석하였다. 소정의 조성을 선택하여 $1180^{\circ}C{\sim}1240^{\circ}C$에서 2시간 동안 환원분위기에서 소결하고, $800^{\circ}C$에서 1 시간 공기 중에서 재산화 처리한 후 R-T 특성을 측정하여 SiO2 함량에 따른 PTC 특성을 분석하였다. 그 결과 SiO2의 함량이 증가할수록 상온 저항은 낮아지다가 3.0 at% 이상으로 첨가할 경우 급격히 상승하는 경향을 나타내었다. 특히 SiO2를 1.0~3.0 at% 일 때 우수한 PTC 특성을 가졌다. $1180^{\circ}C$에서는 소결 밀도가 낮아 상온 비저항이 크게 높았지만, $1200^{\circ}C{\sim}1220^{\circ}C$에서는 정상 입성장이 나타나면서 일반적인 PTC 특성을 가졌지만, $1240^{\circ}C$ 이상에서는 공정 액상이 형성되어 비정상 입성장이 일어나 상온 비저항이 크게 낮아졌다. 한편 점핑비-log(Rmax/Rmin)는 SiO2 함량이 증가할수록 높아지다가 3.0 at% 이상에서는 낮아짐을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.278-281
• /
• 1991

1) The specimen with 0.175[mol%] of additive $Sb_2O_3$ was minute and didn't appear porosity. The relation between the ratio of resistivity at $160^{\circ}C$ to that at $121^{\circ}C$ of the specimen with 0.175[mol%] of additive $Sb_2O_3$ was $3{\times}10^4$ and it's great value from among specimens. 2) The curie temperature of the specimen with 0.2 [mol%] of additive $Sb_2O_3$ was $140^{\circ}C$ AND it's great value from among specimens and those of other were $121^{\circ}C$ in all therefore, the specimen with above 0.2[mol%] of additive $Sb_2O_3$ is not match for PTCR 3) The variation of radiation properties of the specimen with 0.2[mol%] of additive $Sb_2O_3$ was very steep in the range of far-infrared $5{\sim}10[{\mu}m]$ but radiation percentage was very high of 0.92 in the range of $10[{\mu}m]$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.35-38
• /
• 2005

The effect of reduction and re-oxidation firing on the PTCR properties of Sm-doped Barium Titanate ceramics was investigated for the application of multilayered PTC thermistor. The lattice parameter a, c decreases monotonically with increasing oxygen concentration in the reoxidation atmosphere, which seems to be related with the electrostatic Coulomb interaction between oxygen vancancy and nearest other atoms. With increasing oxygen concentration, the resistivity at room temperature and the magnitude of resistivity jump as a function of temperature increased in the region of oxygen concentration of 0 $\sim$ 10%. However, the resistivity at room temperature and the magnitude of resistivity jump is nearly constant and saturated in the region of oxygen concentration of 10 $\sim$ 20%. These phenomena is considered to be related with the variation of oxygen and barium-vancany concentration near the grain boundary.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.182-182
• /
• 2009

The effect of Re-oxidation on the PTCR properties of Sm-doped barium titanate ceramics was investigated by means of impedance spectroscopy. Electrical properties such as resistance vs. temperature, I-V curve were measured and microstructure was observed with SEM photography. Sample was fabricated with thick film process such as tape casting of green sheet, screen printing of electrode pattern, stacking, firing in reduced atmosphere and re-oxidation, etc. As the temperature of re-oxidation increases, resistance jump as a function of temperature enhances but resistance at room temperature increases. These behavior of resistance as a function of temperature, dependent on the re-oxidation condition, is analyzed with Cole-Cole impedance plot and is shown to be related with the degree of oxidation of grain boundary regardless of grain core during re-oxidation process of sample.