• 대한토목학회논문집
• /
• 제40권1호
• /
• pp.69-76
• /
• 2020

도로의 부속시설인 교량은 시공과정에서 콘크리트 및 강재와 같이 환경영향이 큰 자원을 다량 소비하며 이로 인해 큰 환경적 부담을 발생시킨다. 교량의 시공으로 인해 발생하는 환경영향을 줄이기 위해서는 초기 설계단계에서 합리적인 자료를 토대로 환경영향에 대한 검토가 수행되어야 한다. 이 연구는 초기 설계단계의 교량형식 선정과정에서 LCA (Life Cycle Assessment) 기반의 환경영향평가가 가능한 기초자료를 제공하고자 하였다. 이를 위해 기 시공된 4가지 형식(일반 PSC거더, IPC거더, e-Beam, DR거더)의 PSC교량에 대한 설계자료를 수집하고 LCA를 수행하여 환경부하 원단위값과 영향요인을 분석하였다. 분석결과 IPC거더의 환경영향이 가장 작게 나타났고, e-Beam의 환경영향은 IPC거더 보다 133.7% 크게 평가되었다. 또한 콘크리트, 철근, PC강연선, 각재, 쉬즈관, 강판이 PSC거더 전체 환경영향의 약 98.5%를 발생시키는 주요인자로 도출되었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.422-429
• /
• 2005

It is limited to decrease height or section even by system conversion to indeterminate structure - continuous beam - in existing PSC girder bridges. In this study, the movement of connection is analyzed through actual field test, by increasing stiffness of negative moment area in continuous PSC bridge and developing continuous PSC bridge with embedded steel plate, that can overcome the demerit of existing connection. As a result, it is confirmed that the body unification of the connection is being realized and maintained. Moreover, the height of a span is suggested in continuous PSC girder bridge with embedded steel plate by computational analysis

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.451-452
• /
• 2010

PSC I 거더교는 시공성, 경제성, 사용성, 안전성 등 모든 면에서 성능이 매우 우수하여 지금까지 가장 많이 건설되어 온 교량형식이다. 그러나, 국내의 경우에는 표준거더의 형고가 높게 설계되어 장지간화에는 제한적이었다. 따라서, 본 논문에서는 가로보 정착구조를 적용하고 다단계 인장기술을 이용한 연속화 PSC거더의 기술을 개발하는데 그 목적을 두었다.

• 한국안전학회지
• /
• 제21권3호
• /
• pp.94-100
• /
• 2006

The goal of this study is to show the way to increase the safety of deteriorated PSC beam bridges by the to-box reinforcing method. This method is to change the open girder section into the closed box section by connecting bottom flanges of neighboring PSC girders with the precast panels embedding PS tendons at the anchor block. The box section is composed of three concrete members with different casting ages, RC slab, PSC beam, precast panel. This different aging requires a time-dependent analysis considering construction sequences. Reliability index and failure probability are produced by the AFOSM reliability analysis. Transversely five schemes and longitudinally two schemes are considered. The full reinforcing scheme, transversely and longitudinally, shows the highest reliability index, but it requires more cost for retrofit. The partial reinforcing scheme 4, 4-1 are recommended in this study as the economically best scheme.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.538-543
• /
• 2003

This study is the developed prediction of residual effective prestress force of prestressed concrete beam bridges. Developed prediction method is based on the center camber of prestressed concrete beam, structural design. report of various PSC beams, construction reference materials of PSC beams. Evaluation of residual effective prestress force by developed method is compared with evaluation by structural design. This comparison results shows that this developed method is very effective method. Therefore prediction of residual effective prestress force by this developed method will be used for evaluation of the rating of various PSC beam bridges(road bridges and railway bridges).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1203-1208
• /
• 2005

This study is the evaluation of rating of railway prestressed concrete beam bridges by prediction of residual effective prestress force. Therefore, developed prediction method is based on the center camber of prestressed concrete beam, structural design report of various PSC beams, construction reference materials of PSC beams. Both rating evaluation and residual effective prestress force by developed method is compared with evaluation by structural design. This comparison results shows that this developed method is very effective method. Therefore evaluation of rating by prediction of residual effective prestress force will be used for evaluation of the rating of railway PSC beam bridges.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권6호
• /
• pp.205-213
• /
• 2008

FRP 스트럿을 가진 PSC 박스거더 교량 구조는 기존의 PSC 박스거더를 효율적으로 변형시켜 넓어진 상부 슬래브의 캔틸레버 부분을 스트럿으로 지지하는 구조형식으로, 상부구조의 자중을 줄여 하부구조의 크기를 경감시키므로 경제적이고 미관이 뛰어난 교량 건설을 가능하게 한다. 본 연구에서는 국내에서 처음 시도되는 FRP 스트럿을 가진 PSC 박스거더의 실물모형 재하실험과 유한요소해석을 수행하여 상호 결과를 비교함으로써 FRP 스트럿을 가진 PSC 박스거더 교량 구조에서 FRP 스트럿과 스트럿 적용에 따른 상부 슬래브의 구조적 안전성에 대하여 평가하였다.

• Computers and Concrete
• /
• 제17권2호
• /
• pp.241-253
• /
• 2016

Depending on the researcher, the effect of prestressing on the natural frequency of a PSC (prestressed concrete) structure appear to have been interpreted differently. Most laboratory tests on PSC beams available showed that the natural frequency is increased appreciably by prestressing. On the other hand, some other references based on field experience argued that the dynamic response of a PSC structure does not change regardless of the prestressing applied. Therefore, the deduced conclusions are inconsistent. Because an experiment with and without prestressing is a difficult task on a full size PSC bridge, the change in natural frequency of a PSC bridge due to prestressing may not be examined through field measurements. The study examined analytically the effects of prestressing on the natural frequency of PSC bridges. A finite element program for an undamped dynamic motion of a beam-tendon system was developed with additional geometric stiffness. The analytical results confirm that a key parameter in changing the natural frequency due to prestressing is the relative ratio of prestressing to the total weight of the structure rather than the prestressing itself.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.320-328
• /
• 2011

The down town passage segment which follows in the straight line which follows recently in high speed of the railway and rail construction is increasing. Also according to quality of life improvement of the citizens whom follows in national income increase the resident demand only becomes larger day by day about a environmental creation which is comfortable and house environmental etc. Demand of the citizens is not the problem of today yesterday about like this railway mean of transportation and with the fact that continuously will increase in future. This study is to predict and reduce railway noise from the conventional PSC-beam bridges which passes through urban areas under the government strateges of speed and weight increases of railway. The purpose of this study is to recommend a proper noise prediction method for designing pleasant roadside environments. The railway design including existing line reconstructions should minimize curved alignment to increase train speed to 180~200km/hr under the government's long-term planing such as the 4th Comprehensive National Development Plan (2000~2020), National Intermodal Transportation Plan (2000~2019) and National Railroad Network Establishment Plan (2006~2015), Since the PSC-beam bridges are mainly used for bridge structures urban areas, noise measurements were performed and analyzed to recommend the noise prediction methods for each type and speed of train respectively.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2008년도 정기학술발표대회 논문집
• /
• pp.445-448
• /
• 2008

국내 도로건설사업에 있어서 개략공사비 산정 기준은 건설교통부 및 기획예산처, 한국도로공사 등에서 제시하는 평균 건설단가를 기준으로 활용하고 있다. 이때 도로의 등급, 구조물 추간의 구성 비율 등에 따라 공사비를 도정하고 있으나 다양한 공사 특성을 반영하고, 지속적인 공사비 갱신의 기준 등에 한계를 가지고 있다. 대규모 재원이 투입되는 건설공사의 공사비를 합리적인 방법으로 적정하게 예측하는 것은 사업비 관리 측면에서 필수적인 요소는 기술이라 할 수 있다. 본 연구에서는 기획단계에서 가용한 정보를 활용하여 공사비를 예측할 수 있는 사에 기반추론 PSC BEAM교의 개략공사비 산정모델을 개발하였다. 제시된 공사비 예측모델을 검증하기 위하여 표본교량을 대상으로 공사비를 추정한 결과 $-11.92%{\sim}3.20%$의 추정편차를 나타내었으며, 기존 개략공사비 산정 기준에 비해 신뢰도가 향상되었다.