• Korean Journal of Materials Research
• /
• v.24 no.9
• /
• pp.458-464
• /
• 2014

Light scattering enhancement is widely used to enhance the optical absorption efficiency of dye-sensitized solar cells. In this work, we systematically analyzed the effects of spherical voids distributed as light-scattering centers in photoanode films made of an assembly of zinc oxide nanoparticles. Spherical voids in electrode films were formed using a sacrificial template of polystyrene (PS) spheres. The diameter and volume concentration of these spheres was varied to optimize the efficiency of dye-sensitized solar cells. The effects of film thickness on this efficiency was also examined. Electrochemical impedance spectroscopy was performed to study electron transport in the electrodes. The highest power conversion efficiency of 4.07 % was observed with $12{\mu}m$ film thickness. This relatively low optimum thickness of the electrode film is due to the enhanced light absorption caused by the light scattering centers of voids distributed in the film.

• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.60-72
• /
• 1981

This study was carried out to find out the effects of the sheaf size of paddy harvested by the binders on the threshing performance, load characteristics and power requirement of an auto-feed thresher. The results of the study are summarized as follows: 1. The seperating performance of the thresher appeared to be satisfactory for all the sheaf sizes although the amount of rubbishes and empty grains slightly increased with the sheaf size of paddy. 2. There was no significant difference in grain output quality of the thresher among the three sheaf sizes. However, the amount of grains left unthreshed increased with the sheaf size. In the case of the largest sheaf size with the feed rate of 780kg/h, it exceeded the limit set by the national inspection regulations. 3. The position of the feed-chain rail gave a significant effect on the power requirement of the thresher. At the feed rate of 780kg/h, the net power required to convey sheafs through the feed chain was in the range of 0.37 to 0.50 PS for the middle and lowest position of feed-chain rail, and there was no significant difference among the sheaf sizes. At the highest position, however, it appeared that the smallest sheaf required more power than the others. The net power requirements at this position were 1.03, 0.59. 0.65 PS for the smallest, medium and largest sheafs respectively. 4. The torques of both the thresher and the engine shaft increased with the feed rate and were not affected by the sheaf size for the lower two feed rates of 520 and 780kg/h. At the highest feed rate of 1,040 kg/h, however, they were affected by the sheaf size. In this case, the medium sheaf size gave lower values than the others. 5. The variations in the thresher and the engine torque increased with the feed rate and were not affected by the sheaf size for the feed rate of 520kg/h. At the feed rate of 780kg/h, however, they increased with sheaf size. And at the feed rate of 1,040 kg/h, the torque variations increased greatly for all the sheaf sizes due to an over-load operating condition. 6. It appeared that the average and maximum power requirements of the thresher increased with the feed rate. But, there was no significant difference in power requirement among the sheaf sizes for the lower two feed rates. 7. The threshing efficiency of the thresher was in the range of 214-249 kg/ps.h with the feed rates of 520 and 780 kg/h, and it was not affected by both the sheaf size and the feed rate. At the feed rate of 1,040 kg/h, however, it decreased to as low as 171-174 kg/ps.h because of a sudden increase in power requirement. 8. The average power requirements of the engine were slightly higher than those of the thresher due to the slippage of flat belt between the thresher and engine. It appeared that power transmission from the engine to the thresher was maintained properly since slippages were moderately low with the range of 2.78 to 6.51% throughout the tests. 9. The specific fuel consumption of the engine (diesel 8PS) decreased as the feed rate increased. However, there was no significant reduction in specific fuel consumption as the feed rate increased above 780 kg/h.

• Journal of Life Science
• /
• v.18 no.1
• /
• pp.46-51
• /
• 2008

This study investigated the effects of Punica granatum L. (PG) ethanol extracts on serum lipid levels in ovariectomized rats. In order to elucidate the effects of PG ethanol extracts on the change of lipid concentration in rats, Sprague-Dawley female rats were randomly assigned to groups as follows: sham-operated rats (sham), ovariectomized control rats (OVX-control), ovariectomized rats supplemented with ethanol extracts of PG seed at 50 mg/kg bw/day (OVX-PS50), ovariectomized rats supplemented with ethanol extracts of PG seed at 200 mg/kg bw/day (OVX-PS200), ovariectomized rats supplemented with ethanol extracts of PG peel at 50 mg/kg bw/day (OVX-PS50), ovariectomized rats supplemented with ethanol extracts of PG peel at 200 mg/kg bw/day (OVX-PP200). PG ethanol extracts were orally supplemented at the level of 1mL per day for 7 weeks. The body weight gain, food intake and food efficiency ratio were not significantly different between groups by t-test. The levels of total-cholesterol and triglyceride in serum were not changed by supplementation of PG ethanol extracts. The level of HDL-cholesterol on serum of the OVX-PS50 and OVX-PS200 groups were similar to the OVX-control group, but the OVX-PP50 and OVX-PP200 groups were higher than sham group. These results suggest that ethanol extracts of PG peel were more effected than those of PG seed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.7
• /
• pp.980-987
• /
• 2012

In order to investigate the effect of physical forms of starter diets on performance, weaning age, nutrient digestibility and rumen biochemical factors, 24 female of neonatal Brown Swiss calves (average body weight of $39.5{\pm}1.2kg$) were randomly assigned to three treatments. Dietary treatments were mashed (MS), pelleted (PS), and texturized (TS) starter using 8 calves from birth till 90 days of age in each treatment. Diets were formulated to be iso-nitrogenous with 21% crude protein. Based on the experimental results, calves that received PS and TS diets, had significant higher average daily gain (ADG) than those receiving MS (p<0.01). Dry matter intake in calves fed PS and TS was greater than calves fed MS (p<0.05), but there was no significant difference in feed efficiency. Treatments had no effect on initiation of rumination. Weaning age of calves in MS was longer than the other two treatments (p<0.05). Crude protein and organic matter digestibility in MS treated calves were lower than other treatments (p<0.05). No differences were observed in neutral detergent fiber (NDF) and ash digestibility among treatments (p>0.05). Ruminal pH was higher (p<0.01) in MS than the other groups, but ruminal ammonia (g/dl) concentration was not different among the treatments. Body measurements such as body length, pin width, hip width, pin to hip length, size of metacarpus and metatarsus bones, hip height, wither height, stomach size and heart girth were not significantly different among the treatments. Overall, it is concluded that starter diets in the form of pellet and texture can improve performance in neonatal Brown Swiss calves compared to the mashed form.

• Membrane and Water Treatment
• /
• v.6 no.1
• /
• pp.1-13
• /
• 2015

The modification of ultrafiltration membranes with carbon nanotube (CNT) buckypaper on fouling control was investigated. Two types of commercially available flat-sheet membranes were used: PS35 and PES900C/D (PES) (the PS35 membranes were hydrophilic with a molecular weight cutoff of 20 kDa, and the PES membranes were hydrophobic with a molecular weight cutoff of 20 kDa). The CNT buckypaper modified ultrafiltration membranes were prepared by filtering a CNT suspension through the flat-sheet membrane in a dead-end ultrafiltration unit. After modification, the pure water flux of PES was significantly increased, while the pure water flux of PS35 was decreased. The properties of the CNT modified membranes were also investigated. Considering the antifouling properties, pure water flux of the modified membrane, and the stability of CNT buckypaper layer on the membrane surface, ethanol solution with a concentration of 50 wt.%, multi-walled carbon nanotubes (MWCNTs) with a larger diameter (30-50 nm), and the CNT loading with $7.5g/m^2$ was selected. The CNT buckypaper on the surface of ultrafiltration membranes can trap the pollutants in sewage effluent and prevent them reaching the surface of virgin membranes. Water quality analysis showed that the effluent quality of the modified membrane was obviously improved. The removal efficiency of humic acid and protein-like matters by the modified membrane was significant. These results indicate the potential application of the CNT buckypaper layer modified membranes in the field of wastewater reclaim.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.727-733
• /
• 2008

An authentication between a user's terminal and a Access Control Router (ACR) is preceded so that a user receives secure WiBro services. Otherwise they can be exposed from many attack risks. So the Telecommunications Technology Association (TTA) constituted a mechanism of the mutual authentication for WiBro service. In mechanism a user executes the mutual authentication between a Portable Equipment (PE) and the ACR by using Portable Internet Subscriber Identity Module (PISIM). But this standard needs many message to authenticate the ACR and the users cann't use wireless Internet service. Therefore in this paper we propose the key agreement protocol between the PSS and the ACR to authenticate the PSS to ACR. At this time Power Support Device (PSD) fer supporting the calculated quantity of the PSS is participated in the key agreement protocol. The ACR sends a generated key to Key Authentication Server (KAS) via secure IPsec tunnel and then it preserves the identity of the PSS and the value of key after it enciphered them. In conclusion we analyze the security and efficiency of the proposed protocol.

• Journal of Korean Society on Water Environment
• /
• v.38 no.6
• /
• pp.282-291
• /
• 2022

Since the efficiency of wastewater treatment using microalgae differs depending on the metabolic characteristics of the species, it is important to understand the characteristics of target algae prior to the application in wastewater treatment. In this study, for the application of Arthrospira platensis to wastewater treatment, which is a filamentous alkaliphilic cyanobacteria, basic species specificity was identified and the possibility of application to wastewater treatment was investigated. As a result of the species specificity investigation, the specific growth rate between pH 7.0 and 11.0 showed the highest value near pH 9 at 0.25/day. The reason for the relatively low growth(0.08/day) at pH 11 was thought to be the CA(carbonic anhydrase) enzyme that is involved in carbon fixation during photosynthesis has the highest activity at pH 8.0 to 9.0, and at pH 11, CA activity was relatively low. In addition, A. platensis showed optimal growth at 400 PPFD(photosynthetic photon flux density) and 30℃, and this means that cyanobacteria such as A. platensis have a larger number of PS-I(photosystem I) than that of PS-II(photosystem II). It was speculated that it was because higher light intensity and temperature were required to sufficiently generate electrons to transfer to PS-I. Regarding the applicability of A. platensis, it was suggested that if a system using the synergistic effect of co-culture of A. platensis and bacteria was developed, a more efficient system would be possible. And different from single cocci, filamentous A. platensis expected to have a positive impact on harvesting, which is very important in the latter part of the wastewater treatment process.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.44 no.2
• /
• pp.133-139
• /
• 2024

This study aimed to evaluate the efficiency of combining acidification with adsorbents (zeolite and biochar) to mitigate the environmental impacts of pig slurry, focusing on ammonia (NH₃) emission and nitrate (NO₃^-) leaching. The four treatments were applied: 1) pig slurry (PS) alone as a control, 2) acidified PS (AP), 3) acidified pig slurry with zeolite (APZ), and 4) acidified pig slurry with biochar (APB). The AP mitigates NH₃ emission and NO₃^- leaching compared to PS alone. Acidification reduced the cumulative NH₃ emission and its emission factor by 35.9% and 12.5%, respectively. The APZ and APB increased NH₄⁺-N concentration, with the highest level in APB, compared to AP. The NH₄⁺ adsorption capacity of APB (0.90 mg g^-1) was higher than that of APZ (0.63 mg g^-1). The APB and APZ treatments induced less NH₃ emission compared to AP. The cumulative NH₃ emission was reduced by 12.2% and 27.6% in APZ and APB, respectively, compared to AP treatment. NO₃^- leaching began to appear on days 12 and 13, and its peak reached on days 16 and 17, which were later than AP. The cumulative NO₃^- leaching decreased by 17.7% and 25.0% in APZ and APB, respectively, compared to AP treatment. These results suggest that combining biochar or zeolite with acidified pig slurry is an effective method to mitigate NH₃ emission and NO₃^- leaching, with biochar being particularly effective.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.4
• /
• pp.207-212
• /
• 2015

Wi-Fi Direct allows battery powered mobile devices to form a wireless ad hoc network. Since one member of the network called Group Owner (GO) takes the role of managing the network, the network lifetime is mainly affected by the energy efficiency of GO. Hence, Wi-Fi Direct defines power saving schemes that allow GO to save the energy by turning off its radio interface during the periods called absence periods. However, the Wi-Fi Direct specification does not specify how to set parameters (denoted by PS parameters) determining the schedule of the absence periods. In this paper, we therefore propose a novel traffic-aware power saving scheme for Wi-Fi Direct networks. In particular, the proposed scheme estimates the application-level traffic load and adaptively tunes the PS parameters according to the estimated value.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.307-310
• /
• 2000

ATM is the switching and multiplexing technology chosen by the ITU-T for the operation of B-lSDN. Basically, ATM technology is designed to combine the reliability of circuit switching with the efficiency and flexibility of packet switching technology. For servicing QoS in IPOA(IP over ATM) when the larger effort is given, it will be the good method that the original QoS benefits having ATM switching have in ATM layer underlying layer. The IETF has recently proposed Differentiated Services framework for provision of QoS. In this paper we analyse performance of two Diffserv mechanism. Threshold Dropping and Priority Scheduling. Threshold Dropping and Priority Scheduling can be regarded as basic mechanisms from which the other mechanisms have been derived. Hence comparative performance of these two mechanisms in providing required QoS is an important issue. In this Paper we carry out a performance comparison of the TD and PS mechanisms with the aim of providing the same level of packet loss to the preferred flow. Our comparison of the TD and PS allows us to determine resultant packet loss for the non-preferred flows as a function of various parameters of the two mechanisms.