• 약학회지
• /
• 제58권3호
• /
• pp.171-180
• /
• 2014

To enhance the in vitro permeation of lovastatin through excised hairless mouse and human cadaver skins, solubility was determined in various hydrophilic and lipophilic vehicles, and the effects of vehicles and penetration enhancers on the skin permeation from solution formulations were investigated. Solubility of lovastatin was highest in N-methyl-2-pyrrolidone (NMP) ($278.2{\pm}10.1$ mg/ml) and dimethyl sulfoxide (DMSO) ($162.2{\pm}9.7$ mg/ml). Among different pure vehicles used, NMP, DMSO, propylene glycol and isopropyl myristate provided some drug permeation ($6.9{\pm}1.1$, $5.9{\pm}1.6$, $3.0{\pm}0.5$ and $2.2{\pm}0.3{\mu}g/cm^2$ at 24 hr, respectively) through hairless mouse skin. The addition of oleic acid, linoleic acid and oleyl alcohol to DMSO showed the maximum permeation at around 5 v/v%, however, capric acid and caprylic acid had no enhancing effect. The increase of enhancer concentrations showed bell-shaped permeation rate, suggesting the presence of optimal concentration in lovastatin penetration. Increasing donor concentration from 10 mg/ml to 80 mg/ml in DMSO and a cosolvent of DMSO, NMP and DGME (3 : 3 : 4 v/v) did not show significant dose dependent permeation in both hairless mouse and human cadaver skins. The maximum lovastatin flux through human cadaver skin was found to be $0.87{\pm}0.46{\mu}g/cm^2$/hr with 5 v/v% linoleic acid and donor dose of 4 mg/0.64 $cm^2$ in the cosolvent. These results suggest that transdermal delivery of lovastatin would be feasible by establishing the optimal concentrations of donor dose and unsaturated fatty acids in appropriate vehicles.

• Elastomers and Composites
• /
• 제40권4호
• /
• pp.249-257
• /
• 2005

폴리우레탄 프리폴리머들이 폴리올과 디이소시아네이트로부터 제조되었다. 이온화되지 않은 폴리우레탄 프리폴리머들은 폴리프로필렌 글리콜(PPG, MW:1000), 디메치롤 프로피온산(DMPA)과 이소포론 디이소시아네이트(IPDI)를 사용하여 합성되었다. 폴리올과 디이소시아네이트의 몰비를 변화시키면서 합성된 폴리우레탄 프리폴리머들은 물에 분산된 후 물성을 측정하였다. 실험결과는 프리폴리머가 하드세그먼트 40%, NCO 3.43%, [NCO]:[OH]=1.5:1.0의 조건에서 가장 안정한 분산액을 보여 주었고, 30%의 고형분으로 물에 분산되었다. 폴리우레탄 프리폴리머들은 또한 PPG와 DMPA의 몰비를 변화시키면서 합성되었다. DMPA의 몰비가 높을 때 폴리우레탄 수분산액의 입경은 감소하였다 3가지 종류의 말단기 차단제(blocking agent)를 사용하여 제조된 폴리우레탄 프리폴리머들은 사용된 차단제에 따라 각각 다른 초기 해리 온도를 나타내었고 3가지 종류의 차단제에 대한 해리의 시작은 모두 30분 안에 일어났다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.58-63
• /
• 2006

In this study, performance of 2 pure hydrocarbons and 3 mixtures was measured in an attempt to substitute R22 under 3 different temperature conditions. The mixtures were composed of R1270(propylene), R290(propane) and R152a. They were tested in a refrigerating bench tester with a hermetic rotary compressor The test bench provided about 3.5 kW capacity and water and water/glycol mixture were employed as the secondary heat transfer fluids. All tests were conducted under the same external conditions resulting in the average saturation temperatures of $7^{\circ}C/45^{\circ}C$ and $-7^{\circ}C/41^{\circ}C$ and $-21^{\circ}C/28^{\circ}C$ in the evaporator and condenser, respectively. Test results show that the coefficient of performance (COP) of these refrigerants is up to 11.54% higher than that of R22 in all temperature conditions. Compressor discharge temperatures were reduced by $14{\sim}31^{\circ}C$ with these fluids. There was no problem with mineral oil since the mixtures were mainly composed of hydrocarbons. The amount of charge was reduced up to 58% as compared to R22. Overall, these fluids provide good performance with reasonable energy savings without any environmental problem and thus can be used as long term alternatives for residential air-conditioning and heat pumping application.

• Nano
• /
• 제13권12호
• /
• pp.1850141.1-1850141.11
• /
• 2018

Sodium ion batteries based on the more sodium source reserve than that of lithium have been designed as promising alternatives to lithium ion batteries. However, several problems including unsatisfied specific capacity and serious cyclic stability must be solved before the reality. One of the effective approaches to solve the abovementioned problems is to search for suitable anode materials. In this work, we designed and prepared $FeSe_2$ nanoflakes via a simple hydrothermal method which can be adjusted in composition by Fe precursor. As a potential anode for sodium storage, the optimized $FeSe_2$ electrode was further evaluated in different electrolytes of $NaClO_4$ in propylene carbonate/fluoroethylene carbonate and $NaCF_3SO_3$ in diethylene glycol dimethyl ether. The capacity was about $470mAh\;g^{-1}$ and $535mAh\;g^{-1}$ at $0.5A\;g^{-1}$, respectively, in the voltage between 0.5 V and 2.9 V in the cycle of stabilization phase. Superior performance both in capacity and in stability was obtained in ether-based electrolyte, which affords the property without plugging the intermediates of transition metal dichalcogenides during charge/discharge processes.

• Imaging Science in Dentistry
• /
• 제52권4호
• /
• pp.399-408
• /
• 2022

Purpose: The purpose of this study was to compare volume measurements obtained using 2 image software packages on Digital Imaging and Communications in Medicine (DICOM) images acquired from 1 multidetector computed tomography and 5 cone-beam computed tomography devices, using different protocols for physical volume measurements. Materials and Methods: Four pieces of bovine leg were prepared. Marrow was removed from 3 pieces, leaving cortical bone exposed. The resulting space of 1 piece was filled with water, another was filled with propylene glycol, and the third was left unfilled. The marrow in the fourth sample was left fully intact. Volume measurements were obtained after importing DICOM images into the Dolphin Imaging 11.95 and ITK-SNAP software programs. Data were analyzed using 3-way analysis of variance with a generalized linear model to determine the effects of voxel size, software, and content on percentage mean volume differences between tomographic protocols. A significance level of 0.05 was used. Results: The intraclass correlation coefficients for intraobserver and interobserver reliability were, respectively, 0.915 and 0.764 for the Dolphin software and 0.894 and 0.766 for the ITK-SNAP software. Three sources of statistically significant variation were identified: the interaction between software and content (P=0.001), the main effect of content (P=0.014), and the main effect of software (P=0.001). Voxel size was not associated with statistically significant differences in volume measurements. Conclusion: Both content and software influenced the accuracy of volume measurements, especially when the content had gray values similar to those of the adjacent tissues.

• 약학회지
• /
• 제42권3호
• /
• pp.290-295
• /
• 1998

To optimize the formulation of acetaminophen liquid suppository, the effect of additives on the physicochemical properties of liquid suppository base was investigated. The physi cochemical properties of P 407/P 188 (15/15%) (abbreviated in 15/15) and P 407/P l88 (15/20%) (abbreviated in 15/20) were measured after the addition of following additives; 2.5% acetaminophen as an active ingredient, vehicle components (5% ethanol, 5% propylene glycol, 5% glycerin), preservatives (0.1% sodium benzoate, 0,1% methylparahydroxybenzoate, 0.1% propylparahydroxybenzoate) and 1% of sodium chloride as an ionic strength controlling agent. Poloxamer gel was prepared with three different buffer solutions (pH 1.2, 4.0 and 6.8) and the physicochemical properties, gelation temperature, gel strength and bioadhesive force, were determined. In the results, the effect of additives on the physicochemical properties was dependent on their bonding capacities including hydrogen bonding and cross-linking bonding. Because the hydrogen-bonding capacities of acetaminophen, ethanol and propylene glycol were smaller than that of poloxamer, the binding force of poloxamer gel became weak by their putting in between poloxamer gel. Therefore, the gelation temperature (15/15, $35.7^{\circ}C$ vs 37.0, 39.4 $38.2^{\circ}C$; 15/20, $29.2^{\circ}C$ vs 31.2, 32.0, $30.3^{\circ}C$) increased, and gel strength (15/15, 4.03 see vs 2.72, 2.08, 3.12sec; 15/20, 300g vs 50, 50, 200g) and bioadhesive force (15/15, $6.8{\times}10^2\;dyne/cm^2$ vs 3.2, 6.0, $6.0{\times}10^2\;dyne/cm^2$; 15/20, $97.3{\times}10^2\;dyne/cm^2$ vs 11.1, 89.5, $92.0{\times}10^2\;dyne/cm^2$) decreased. Furthermore, the binding force of poloxamer gel became strong due to the hydrogen-bonding capacities of glycerin and the cross-liking bonding of sodium salt. Then, the gelation temperature (15/15, 35.0, $32.1^{\circ}C$; 15/20, 26.0, $21.0^{\circ}C$) decreased, and gel strength (15/15, 6.51 see, 300g; 15/20, 500, 650g) and bioadhesive force (15/15, 7.2, $81.6{\times}10^2\;dyne/cm^2$; 15/20, 112.3, $309.2{\times}10^2\;dyne/cm^2$) increased. The effect of pH on the physicochemical properties of poloxamer gel was dependent on the ingredients with which the buffer solutions were prepared. Poloxamer gels prepared with pH 1.2 and 4.0 buffer solutions had the increasing gelation temperature (15/15, 37.5, $38.1^{\circ}C$; 15/20, 33.1, $34.0^{\circ}C$) and the decreasing gel strength (15/15, 2.98, 3.81sec; 15/20, 200, 200g) and bioadhesive force (15/15, $7.0{\times}10^2dyne/cm^2$; 15/20, $74.0{\sim}88.1{\times}10^2dyne/cm^2$) owing to HCl. Poloxamer gel prepared with pH 6.8 buffer solutions had the decreasing gelation temperature (15/15, $27.2^{\circ}C$; 15/20, $22.3^{\circ}C$) and the increasing gel strength (15/15, 400g; 15/20, 550g) and bioadhesive force (15/15, $207.0{\times}10^2dyne/cm^2$; 15/20, $215.0{\times}10^2dyne/cm^2$) due to the cross-linking bonding of $NaH_2PO_4\;and\;K_2HPO_4$.

• 청정기술
• /
• 제28권2호
• /
• pp.131-137
• /
• 2022

현재 반도체 공정에서 다양한 by-product 및 미사용 가스가 배출되고 있다. 오염물질을 함유한 배기는 일반적으로 유기, 산, 알칼리, 열, 캐비넷 배기 등으로 분류하며, 각각의 배기 특성에 맞는 대기 방지설비에서 처리 후 배출된다. 유기 배기 물질로서 휘발성 유기 화합물(volatile organic compound, VOC)은 산소 함유 탄화수소, 유황 함유 계 탄화수소 및 휘발성 탄화수소를 총칭하는 물질이고, 알칼리 배기의 주요성분은 암모니아(NH₃), 수산화테트라메틸암모늄(Tetramethylammonium hydroxide, TMAH)등이 있다. 본 연구의 목적은 유기와 알칼리 배기가스를 동시에 처리하기 위해 직접 연소 및 로 내 온도를 일정하게 유지하여 연소 특성 파악하고 NO_X 저감률을 분석하고자 진행하였다. VOC는 Acetone, IPA(isopropyl alcohol), PGMEA(propylene glycol methyl ether acetate)을 사용하였으며, 알칼리 배기 대표 물질로는 암모니아를 사용하였다. 실험 변수로는 온도와 당량 비(equivalence ratio, ER)로 배기가스 특성을 살펴보았다. 물질별 단독 및 혼합 연소테스트를 진행하였다. VOC 단독 테스트 결과 당량 비 1.4 조건에서 완전 연소가 일어남을 확인하였다. 암모니아는 당량 비 감소에 따라 산소 및 질소산화물의 농도가 감소하였다. 혼합 연소 운전 결과 배기가스 조성 내 질소산화물의 대부분은 일산화질소였으며 이산화질소는 10 ppm 부근으로 검출되었다. 전체적으로 질소산화물의 농도는 반응온도가 증가하면서 산화반응이 활성화되어 감소하는 경향을 나타나지만 이산화탄소의 농도는 증가하는 경향을 확인하였다. 전기열원을 적용한 무 화염 연소 기술을 적용하였을 때 VOC 및 암모니아 연소가 원활하게 일어남으로써 현재 별도로 운전되는 유기 및 알칼리 배기 시스템보다 경제성 및 공간적인 측면에서 장점이 있다고 판단된다.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1997년도 춘계학술대회
• /
• pp.116-116
• /
• 1997

Complex formation of practically insoluble dexamethasone dipropionate (DDP) with ${\beta}$-cyclodextrin (${\beta}$-CD), dimethyl-${\beta}$-cyclodextrin (DMCD), trimethyl-${\beta}$-cyclodextrin (TMCD), 2-hydroxypropyl-${\beta}$-cyclodextrin (HPCD) and sulfobutyl ether ${\beta}$-cyclodextrin (SBCD) in water was investigated by solubility method at various temperatures. Water solubility of DDP was found to be 1.78 $\mu\textrm{g}$/$m\ell$ at 37$^{\circ}C$. Propylene glycol (PG)-water cosolvent increased the solubility of DDP, but the solubilization was not sufficient (8.93 $\mu\textrm{g}$/$m\ell$ in 20% PG). The addition of CD markedly increased the solubility of DDP in water, and A$\sub$L/ type phase solubility diagrams were obtained with ${\beta}$-CD, TMCD, HPCD and SBCD, where the apparent stability constants of the soluble complexes at 25$^{\circ}C$ were determined to be 1388, 216, 1054, and 1992 M$\^$-1/, respectively. However, DMCD remarkably increased the solubility of DDP, and showed an A$\sub$P/ type diagram, suggesting that DMCD forms a soluble complex of high order with DDP. The stability constant for the DDP-DMCD complex at 25$^{\circ}C$ was determined to be 19132 M$\^$-1/. The thermodynamic parameters were calculated for the inclusion complex formation in aqueous solution. CD (1${\times}$10$\^$-2/M) remarkably decreased the partition coefficients of DDP between isopropyl myristate/water in the order of TMCD < ${\beta}$-CD < HPCD < SBCD < DMCD, and in squalane/water system in the order of HPCD < TMCD < ${\beta}$-CD < DMCD < DMCD $\leq$ SBCD. This finding represents that, in a o/w type cream, cyclodextrin complexation with DDP may result in high concentration of DDP in aqueous phase. The permeation of DDP through a cellophane membrane was highly suppressed by the addition of CD, and the degree of suppression was different among CDs, indicating that CD may control the skin permeation of DDP. The dissolution rates of solid dispersions with CDs were much faster than those of drugs alone and corresponding physical mixtures. All DDP-CD solid dispersions exceeded the equilibrium solubility. Consequently these results suggest that complex formation of DDP with CDs may provide useful means to markedly enhance the solubility, and CDs are useful in the semi-solid preparations such as creams and gels for topical application.

• Journal of Pharmaceutical Investigation
• /
• 제32권4호
• /
• pp.267-275
• /
• 2002

A self-microemulsifying drug delivery system (SMEDDS) was developed to increase the dissolution rate, solubility, and ultimately bioavailability of a poorly water soluble drug, lovastatin. SMEDDS was thε mixtures of oils, surfactants, and cosurfactants, which emulsify under conditions of gentle agitation, similar to those which would be encountered in the gastro-intestinal (GI) tract. Various types of self-emulsifying formulations were prepared using four types of oil (Capryol 90, Lauroglycol 90, Labrafil M 1944 CS and Labrafil M 2125), two surfactants (Cremophor EL and Tween 80), and three cosurfactants (Carbitol, PEG 400 and propylene glycol). Thε efficiency of emulsification was studied using a laser diffraction size analyzer to determine particle size distributions of the resultant emulsions. Optimized formulations selected for bioavailability assessment were Carpryol 90 (40%), Cremophor EL (30%) and Carbitol (30%). SMEDDS containing lovastatin (20 mg and 5 mg) were compared to a conventional lovastatin tablet $(Mevacor^{\circledR},\;20\;mg/tab)$ by the oral administration as prefilled hard gelatin capsules to fasted beagle dogs for in vivo study. The arεa under the serum concentration-time curve from time zero to the last measured time in serum, $AUC_{0{\rightarrow}24h}$, was significantly greater in SMEDDS, suggesting that bioavailability increase 130% and 192% by the SMEDDS, respectively. The self-emulsifying formulations of lovastatin afforded the improvement in absolute oral bioavailability relative to previous data of lovastatin tablet formulation. These data indicate the utility of dispersed self-emulsifying formulations for the oral delivery of lovastatin and potentially other poorly absorbed drugs.

• 약학회지
• /
• 제41권3호
• /
• pp.305-311
• /
• 1997

Sustained release-microspheres and immediate release-pellets were prepared to develop a controlled release multiparticulate system containing both water soluble and insoluble dr ug. Pseudoephedrin.HCl (EPD) and terfenadine (TRF) were used as model drugs, respectively. Sustained release-EPD microspheres were prepared by solvent evaporation method using Eudragit RL or RS as a matrix combined with pH-insensitive film coating. Smaller EPD microspheres were obtained when smaller amount of Eudragit as a matrix material or larger amount of magnesium stearate as a dispersing agent was used. However the obtained microspheres did not show syfficient sustained release characteristics. About 97% of EPD was released after 1 hr irrespective of matrix material used. Subsequent coating of the microspheres with pH-insensitive polymer such as Eudragit RS or ethylcelulose (EC) resulted good sustained in 37.5, 73.3 and 92.0% release of encapsulated EPD in distilled water after 1, 3 abd 7 hr, respectively. It corresponds to mean dissolution time (MDT) of 2.3 hr, which is much larger than that of un-coated EPD microspheres (0.0048 hr). Immediate release TRF pellets were prepared by spherically agglomerated crystallization using Eudragit E as an inert matrix and methylene chloride as a liquid binder. Using Eudragit E alone as a matrix resulted in satisfactory physical properties of the pellets such as sphericity, surface texture and flowability, but led to slower release of TRF from pellets than un-modified TRF powder (MDT of 1.70 vs 1.43 hr in pH 1.2 dissolution medium). Introducing propylene glycol or sodium lauryl sulfate as an emulsifier brought about faster release of TRF from pellets (MDT of 1.14 and 0.95 hr, respectively). In conclusion, microencapsulation by solvent evaporation combined with film coating and spherically agglomerated crystallization were successfully utilized to prepare controlled release multiparticulate system composed of sustained release EPD-microspheres and immediate release TRF pellets.