• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.3
• /
• pp.455-459
• /
• 1992

Five type of formulated diet from agricultural by-products (ABP) were fed to four breedtype of cattle in feedlot. The ABP used are palm kernel cake (PKC), palm press fibre (PPF), palm oil mill effluent (POME), cocoa pod (COP), coffee pulp (COF) and pineapple waste (PAP). The formulated diets are PS (52% PKC, 15% PPF and 30% POME), PF (57% PKC, 20% PPF and 20% POME), PA (2% PKC and 55% PAP), CO (42% PKC and 55% COP) and CF (67% PKC and 30% COF) with 1% urea, 1% NaCl and 1% vitamins premix. The cattle breedtypes are Kedah-Kelantan (KK), Brahman-KK (BK), Hereford-KK (HK) and Sahiwal-Friesian (SF). The result showed that breedtype significantly affect all the carcass characteristic except dressing percentage. Each breedtype has it's specific carcass characteristics. HK cattle gave high marbling, BK has high % of carcass bone, KK has high % of carcass meat and low % of carcass fat (lean meat type) and SF has high % of carcass fat. Diet-type significantly affect the deposition of fat in the carcass. High moisture diets (PA and CO) produced significantly higher % carcass bone, the lowest % carcass fat and the highest % carcass meat (65.3%). PF, CF, PA and CO diets produced 63.4%, 59.9%, 55.3% and 54.1% carcass meat respectively.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.461-470
• /
• 2014

This paper presents a probabilistic power flow (PPF) analysis method for distribution network incorporating the randomness and correlation of photovoltaic (PV) generation. Based on the multivariate kernel density estimation theory, the probabilistic model of PV generation is proposed without any assumption of theoretical parametric distribution, which can accurately capture not only the randomness but also the correlation of PV resources at adjacent locations. The PPF method is developed by combining the proposed PV model and Monte Carlo technique to evaluate the influence of the randomness and correlation of PV generation on the performance of distribution networks. The historical power output data of three neighboring PV generators in Oregon, USA, and 34-bus/69-bus radial distribution networks are used to demonstrate the correctness, effectiveness, and application of the proposed PV model and PPF method.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2709-2716
• /
• 2020

Compositions of large nuclear cores (e.g. boiling water reactors) are highly heterogeneous in terms of fuel composition, control rod insertions and flow regimes. For this reason, they usually lack high order of symmetry (e.g. 1/4, 1/8) making it difficult to estimate their neutronic parameters for large spaces of possible loading patterns. A detailed hyperparameter optimization technique (a combination of manual and Gaussian process search) is used to train and optimize deep neural networks for the prediction of three neutronic parameters for the Ringhals-1 BWR unit: power peaking factors (PPF), control rod bank level, and cycle length. Simulation data is generated based on half-symmetry using PARCS core simulator by shuffling a total of 196 assemblies. The results demonstrate a promising performance by the deep networks as acceptable mean absolute error values are found for the global maximum PPF (~0.2) and for the radially and axially averaged PPF (~0.05). The mean difference between targets and predictions for the control rod level is about 5% insertion depth. Lastly, cycle length labels are predicted with 82% accuracy. The results also demonstrate that 10,000 samples are adequate to capture about 80% of the high-dimensional space, with minor improvements found for larger number of samples. The promising findings of this work prove the ability of deep neural networks to resolve high dimensionality issues of large cores in the nuclear area.

• Journal of Bio-Environment Control
• /
• v.11 no.1
• /
• pp.40-44
• /
• 2002

A prototype of closed-type transplant production system(CTTPS) with fully environmental control was developed to produce massively quality transplants. Four photosynthetic photon flux(PPF) levels of 200,300,400 and 500$\mu$mol . m$^{-2}$ .s$^{-1}$ , four photoperiod levels of 1816 h,12/12h, 9/15 h and 6/18 h were provided to analyze the growth and development of cucumber plug seedlings(Cucumis sativus L., cv. Kyuewosalichungiang) as affected by PPF and photoperiod in a CTTPS. Effect of photoperiod on the growth and development of cucumber plug seedlings produced in a CTTPS was higher than PPF, Stem diameters dry weight of shoot and roots number of leaves, leaf with and length, and SPAD value of cucumber plug seedlings produced in a CTTPS were significantly high as compared to the control. But stem length of plug seedlings produced in a CTTPS was shorter than those of the control. Growth characteristics of cucumber plug seedlings raised at photoperiod of 6/18 h and PPF of 200$\mu$mol . m$^{-2}$ .s$^{-1}$ were similar to the those of the control. These results suggest that cucumber quality transplant can be produced at relatively short photoperiod and low PPF, It means that the electric energy consumed for the production of cucumber plug seedlings in a CTTPS can be saved.

• Journal of Bio-Environment Control
• /
• v.11 no.3
• /
• pp.115-120
• /
• 2002

Growth and development of Limonium spp.‘Ocean Blue’plantlets were studied under three levels of photosynthetic photon flux (PPF),70,150 and 220 $\mu$mol. $m^{-2}$ . $s^{-1}$ , two levels of $CO_2$ concentration, 500 and 1000 $\mu$mol. $m^{-1}$ , and two levels of number of air exchanges per hour (NAEH),0.1 $h^{-1}$ and 2.8 $h^{-l}$. Explants were obtained from photomixotrophically-micropropagated plantlets. Four explants per vessel were cultured under cool-white fluorescent lamps for 16 h. $d^{-1}$ at 25$\pm$11$^{\circ}C$ and 70~80% relative humidity. In treatments of 2.8 $h^{-1}$ NAEH, a 10 mm round hole made on the vessel cap was sealed with a microporous filter and two $CO_2$ concentrations in the culture rooms were provided from a liquefied $CO_2$ tank. Fresh and dry weights, height, length of the longest root, number of loaves, and leaf area significantly increased with increasing PPF and especially, $CO_2$ concentration. Growth was enhanced by a 2.8 $h^{-1}$ NAEH. Overall, treatment with a 220 $\mu$mol. $m^{-2}$ . $s^{-1}$ PPF and a 1000 $\mu$mol. $m^{-1}$ $CO_2$ resulted in the most vigorous growth of Limonium spp. ‘Ocean Blue’ plantlets.s.

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.14-23
• /
• 2013

This study evaluated the influence of light quality and intensity during healing and acclimatization on the $CO_2$ exchange rate, growth, and morphogenesis of grafted pepper (Capsicum annuum L.) transplants, using a system for the continuous measurement of the $CO_2$ exchange rate. C. annuum L. 'Nokkwang' and 'Tantan' were used as scions and rootstocks, respectively. Before grafting, the transplants were grown for four weeks in a growth chamber with artificial light, where the temperature was set at $25/18^{\circ}C$ (light/dark period) and the light period was 14 hours $d^{-1}$. The grafted pepper transplants were then healed and acclimatized under different light quality conditions using fluorescent lamps (control) and red, blue, and red + blue light-emitting diodes (LEDs). All the transplants were irradiated for 12 hours per day, for six days, at a photosynthetic photon flux (PPF) of 50, 100, or 180 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. The higher PPF levels increased the $CO_2$ exchange rate during the healing and acclimatization. A smaller increase in the $CO_2$ exchange rates was observed in the transplants under red LEDs. At a PPF of 180 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, the $CO_2$ exchange rate of the transplants irradiated with red LEDs was lowest and it was 37% lower than those irradiated with fluorescent lamps. The $CO_2$ exchange rates of transplants irradiated with blue LEDs was the highest and 20% higher than those irradiated under fluorescent lamps. The graft take was not affected by the light quality. The grafted pepper transplants irradiated with red LEDs had a lower SPAD value, leaf dry weight, and dry matter content. The transplants irradiated with blue LEDs had longer shoot length and heavier stem fresh weight than those irradiated with the other treatments. Leaves irradiated with the red LED had the smallest leaf area and showed leaf epinasty. In addition, the palisade and spongy cells of the pepper leaves were dysplastic and exhibited hyperplasia. Grafted pepper transplants treated with red + blue LEDs showed similar growth and morphology to those transplants irradiated with fluorescent lamps. These results suggest that high-quality grafted pepper transplants can be obtained by healing and acclimatization under a combination of blue and red lights at a high PPF level.

• Journal of Plant Biotechnology
• /
• v.32 no.1
• /
• pp.23-29
• /
• 2005

Shoots of balloon flower (Platycodon grandiflorum A. DC.) derived from in vitro germinated seeds were cultured on MS medium containing $0.1\;\cal{mg/L}$ NAA under various photosynthetic photon flux (PPF) 33, 66, and $99\;{\mu}mol\;m^{-2}s^{-1}$ with or without membrane filter. Number of air exchanges per hour (NAEH) of the culture vessel with membrane filter on the lid was $4.9 h^{-1}$ and that without membrane filter was $0.1 h^{-1}$ Plantlets grown in $4.9 h^{-1}$ NAEH showed greater growth than in $0.1 h^{-1}$ NAEH. According to increase of PPF, plantlets growth decreased in $0.1 h^{-1}$ NAEH while it increased in $4.9 h^{-1}$ NAEH. At the same PPF, fresh weight and sugar content in plantlets in $4.9 h^{-1}$ NAEH were above 1.9, 2.0 times higher than those in $0.1 h^{-1}$ NAEH, respectively. Also they were enhanced in $4.9 h^{-1}$ NAEH by increase of PPF whereas no significance in $0.1 h^{-1}$ NAEH. The percentage of water content of plantlets in $4.9 h^{-1}$ NAEH was $4.2\~5.5\%$ lower than those in $0.1 h^{-1}$ and no difference in PPF. The content of total chlorophyll in plantlets in $4.9 h^{-1}$ NAEH was higher $0.27\~0.79\;\cal{mg/g}$ F.W. than that in $0.1 h^{-1}$ NAEH. By increase of PPF, it was decreased in $0.1 h^{-1}$ NAEH while had no significant difference in $4.9 h^{-1}$ NAEH. Guard and subsidiary cells of leaves in $4.9 h^{-1}$ NAEH were more developed than in $0.1 h^{-1}$ NAEH. Especially, in $99\;{\mu}mol\;m^{-2}s^{-1}$ leaves in $0.1 h^{-1}$ NAEH had undeveloped subsidiary cells and wide open stomata whereas those in $4.9 h^{-1}$ NAEH had well-developed subsidiary cells.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.8
• /
• pp.612-618
• /
• 2003

A hybrid vibration control scheme using ER fluid and PZT patches is proposed. Dynamic characteristics of the beam embedded with the ER fluid can be controled by changing the strength of the electric field applied on the ER fluid, thus provides a mean to avoid the resonance. It was found that active vibration control of the structure embedded with ER fluid failed to suppress the vibration excited with broad band frequency due to the limited change of the dynamic characteristics of the structure. To compensate this limited effect of the control scheme with ER fluid alone, PPF control using PZT patches as sensors and actuators is added to construct a hybrid controller. Experimental results suggests that proposed hybrid controller is effective to suppress the additional resonance vibration that appears when each controller is used alone.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.382-387
• /
• 2003

Many type of smart materials and control laws are available to actively adjust the structure from various external disturbances. Usually, a certain type of control law to activate a specific smart material is tell established, but the effectiveness of the control scheme is limited by the choice of the smart materials and the responses of the structure. ER fluid is adequate to provide small but arbitrary control forces at any point along the structure. It was found that active vibration control of the structure embedded with ER fluids fluidly to suppress the vibration excited with broad band frequency due to the limited change of the structure characteristics. To compensate this limited effect of the control scheme with ER fluid alone, PPF control using PZT as an actuator is added to construct a hybrid controller.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.44-45
• /
• 2018

In this study, water vapor pressure of high strength concrete reinforced with amorphous steel fiber(AF) was evaluated. Experimental results show that spalling occurs when the incorporation rate of amorphous steel fiber is 0.5 vol.% or more. This is because the ratio of AF increased per unit area influenced the formation of the water vapor pressure discharge passage by the polypropylene fiber(PPF) melting. Therefore, it is necessary to find the proper mixing ratio of AF and PPF to prevent spalling.