• Science of Emotion and Sensibility
• /
• v.1 no.2
• /
• pp.55-63
• /
• 1998

섬유 패턴 디자인을 체계적이고 객관적으로 기술할 수 있는 도구를 패턴 디자인의 지각적 속성에 기초하여 개발하였다. 세 단계로 이루어진 연구의 첫 단계에서는 패턴 디자인의 단계를 실제 디자인 과정에 기초하여 'PP의 디자인', 'RPU의 디자인', 'RPU의 배열'의 순서로 개념화한 후, 이 데 영역에 걸쳐 30개의 지각적 특징들을 추출하였고, 섬유 패턴 디자인을 충실히 기술할 수 있다는 것을 확인하였다. 다음으로 추출된 30개의 지각적 특징들을 'PP의 모양에 의한 돌출성', 'PP의 색채에 의한 돌출성', 'PP들 모양의 다양성'. 'PP들의 변화도', 'PP들 색채의 다양성', 'RPU의 돌출성', 'RPU의 다양성'이라는 7개의 상위 특징으로 수렴시킨 후, 이 7개의 상위특징들을 다시 'PP에 의한 다양성', 'RPU의 돌출성' 'RPU의 다양성'이라는 4개의 최상위 특징으로 수렵시키는 방식으로 위계화 하여 섬유 패턴 디자인 요소 분석체계를 구성하였다. 또한 대표적인 섬유 패턴 디자인에 대한 이 체계의 기술 가능성을 검토함으로써 본 체계를 수정·보완하였다.

• Carbon letters
• /
• v.11 no.4
• /
• pp.311-315
• /
• 2010

In this work, the effect of glycidyl methacrylate grafted multi-walled carbon nanotubes (GMA-MWCNTs) on the viscoelastic behaviors of polypropylene (PP) based nanocomposites was studied. The GMA-MWCNTs/PP was prepared using a bravender at $200^{\circ}C$ by melt mixing as a function of GMA-MWCNT content. The viscoelastic behaviors of GMA-MWCNTs/PP nanocomposites were measured by a rheometer. It was found that the GMA-MWCNTs were homogeneously dispersed in the PP matrix. The GMA-MWCNTs/PP nanocomposites showed higher storage modulus, loss modulus, and shear viscosity compared to pure PP nanocomposites and the maximum value was shown at 2.0 wt% GMA-MWCNTs loading. These results were probably attributed to the strong interfacial interaction between the GMA-MWCNT and the PP matrix.

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.04a
• /
• pp.47-52
• /
• 1996

PP-PHE blends were prepared by mechanical blending using relatively high moecular weight polyhydrozyether(PHE) and popypropylene polymers. PP-PHE blends were prepared and characterized for the purpose of obtaining a dycable PP fibers with the composition of less than 10 wt.% of PHE. 1)yeable PP fibers were acquired through the melt spinning of the PP-PHE blend of comprising less than 10 wt.% of PHE. The resultant fibers had tensile strength of 2~3 g/d, elongation of 330~600%, initial modulus of 22~46 g/d and yield stress of 1.0 g/d, and exhibited markedly improved dyeing ability such as higher absorbance, higher dye adsorption and deeper shade than those of pure PP fiber.

• Elastomers and Composites
• /
• v.55 no.1
• /
• pp.1-5
• /
• 2020

This study examined the effects of the addition of maleic anhydride-grafted polypropylene (PP-g-MA) and polyolefin elastomer (POE) on polyamide 66 (PA66) and polypropylene (PP) blends. The blends of PA66/PP with PP-g-MA and POE were prepared using a twin screw extruder. Mechanical testing results revealed that the tensile, flexural, and izod impact strengths of the blends were maximized at a PP-g-MA content of 2 phr. The increased mechanical strength of the blends with PP-g-MA was attributed to the compatibilizing effect of the PA66 and PP blends. In addition, as the POE content increased, the impact strength of the blends increased. However, at a high POE content, the tensile and flexural strengths decreased, seemingly because of the lower mechanical properties of POE.

• Journal of Intelligence and Information Systems
• /
• v.3 no.2
• /
• pp.83-91
• /
• 1997

DELVAUX is an inductive learning environment that learns Bayesian classification rules from a set o examples. In DELVAUX, a genetic a, pp.oach is employed to learn the best rule-set, in which a population consists of rule-sets and rule-sets generate offspring by exchanging some of their rules. We have explored a meta-learning a, pp.oach in the DELVAUX learning environment to improve the classification performance of the DELVAUX system. The meta-learning a, pp.oach learns the bias of a classifier so that it can evaluate the prediction made by the classifier for a given example and thereby improve the overall performance of a classifier system. The paper discusses the meta-learning a, pp.oach in details and presents some empirical results that show the improvement we can achieve with the meta-learning a, pp.oach.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.1
• /
• pp.1-8
• /
• 2013

This study will not only prove experimental dynamic properties which are classified to slump, compressive strength, tensile strength, flexure strength and toughness granite soil concrete with a fine aggregate of granite soil and blast-furnace cement and polypropylene fiber over 45 mm, but also establish a basic data in order to use environment-friendly pavement through prove useful pavement mixed with granite and polypropylene (PP) fiber which is a kind of material to prevent a dry shrinkage clack, a partial destruction and useful and light. The value of slump test was gradually increased by PP fiber volume 3 $kgf/m^3$, but compressive strength took a sudden turn for the worse from 5 $kgf/m^3$. The compressive strength indicated a range of 13.72~18.35 MPa. On the contrary to compressive strength, the tensile strength showed to decrease with rising PP fiber volume, and the tensile strength indicated a range of 1.43~1.64 MPa. The tensile strength was stronger about 2~15 % in case of mixing with PP fiber volume than normal concrete. The flexural strength indicated a range of 2.76~3.41 MPa. The flexural strength was stronger about 20 % in case of PP fiber volume 0 $kg/m^3$ than PP fiber volume 9 $kg/m^3$. The toughness indicated a range of 0~25.46 $N{\cdot}mm$ and increased proportionally with PP fiber volume. The toughness was stronger about 8.3 times in case of PP fiber volume 9 $kg/m^3$ than PP fiber volume 1 $kg/m^3$. The pavement with PP fiber volume over such a fixed quantity in the park roads and walkways can have a effect to prevent not only resistance against clack but also rip off failures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.867-873
• /
• 2007

Thermal degradation characteristics of polypropylene and polystyrene have been studied in the thermogravimetric(TG) reactor and batch-type microreactor. The dynamic thermogravimetric curve of TG provided a valuable information about pyrolysis temperature. It was found that PS was thermally degraded at lower temperature of $30{\sim}50^{\circ}C$ than PP. It was found that the yield and molecular weight of liquid product in the microreactor were decreased with the increase of reaction temperature and time in the case of PP. The production of styrene monomer was significantly increased by the promotion of depolymerization with the increase of temperature and time. The chain-end scission rate parameters were determined to be 50.0 kcal/mole of PP, 45.2 kcal/mole of PS by the Arrhenius plot.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1991.04a
• /
• pp.1-4
• /
• 1991

고분자와 희석제 간의 interaction은 phase diagram의 형태로 결정하고 상분리 mechanism은 phase diagram에 의해 설명된다. Thermodynamic interaction이 TIPS 분리막의 구조에 미치는 영향을 조사하기 위하여 PP/C20alkane, PP/C20acid, PP/TA 3가지 system을 선택하였다. 200$^{\circ}$C에서 25 $^{\circ}$C로의 급냉과 분당 10 $^{\circ}$C의 냉각조건을 적용하였다. 각 phase diagram의 형태와 냉각조건에 따라 상분리 mechanism이 달라져서 서론에서 언급한 바와 같이 각기 특유의 구조를 갖게됨을 확인하였다. 같은 종류의 희석제의 chain length가 분리막의 구조에 미치는 영향을 조사하였다. 희석제의 chain length에 따라 결정화 온도가 달라지며 PP와의 결정화 속도 차이에 의하여 구조가 다양하게 변화되었다. 또한 가 희석제의 확산계수의 차이에 의하여 PP 결정화 시 희석제의 외부 방출 정도가 달라 이에 의한 구조의 차이도 관찰되었다. TIPS 공정에서 용액의 조성이 분리막의 구조에 미치는 영향을 조사하였는데, 조성에 의한 nucleation density의 차이에 따라 PP spherulite의 충돌 (impingment)등이 구조에 영향을 미쳤으며 porosity도 변화하였다. 또한 PP/TA system에서는 조성에 따라 상분리 mechanism이 달라져 현격한 구조의 차이를 보였다. 또한 냉각 속도에 따라 PP spherulitic structure가 변화함을 확인하였고, PP 결정화에 따른 희석제의 방출에 의하여 interspherulitic과 intraspherulitic pore를 갖는 2중 구조를 갖게 됨을 알 수 있다.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.742-748
• /
• 1998

Experiments have been conducted to investigate synergistic effects and mechanisms of the Alaskan subbituminous coal/polypropylene (PP). Coliquefaction of coal/PP gave the synergistic effect in yields by 17% compared to independent liquefactions of coal or PP at $430^{\circ}C$. To analyse coliquefaction mechanisms, the second and zeroth order kinetic models were developed for coal and PP conversions respectively. When the models were simulated to fit coliquefaction results, those represented results successfully with the correlation coefficient of 0.99. The amount of tetralin needed to liquefy unit mass of coa 1(${\beta}$) was also calculated using the developed model. According to the calculated results, $\beta$ increased from 0.4 to 1.0 as the coliquefaction temperature increased from $410^{\circ}C$ to $470^{\circ}C$. This indicated that tetralin lowered the molecular weight of oil produced, and this phenomenon was recognized by the GPC analyses. Furthermore, it was found that tetralin prohibited the liquefaction of PP when coal was not added. On the other hand, tetralin was believed to act as a hydrogen-donor solvent to coal rather than prohibit PP liquefaction during coliquefaction. Therefore, the liquefaction rate of PP increases and synergistic effects in oil yields are mainly due to the increase in PP liquefaction during coal/PP coliquefaction.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.5
• /
• pp.303-314
• /
• 2021

With the high quality/high stiffness/high strength of segment lining, segment lining is increasingly used as the final lining of the tunnel. Precast concrete lining has higher quality and strength than field concrete. Paradoxically, this contributes to greater damage to concrete in the event of a fire in a tunnel. In this study, tests were conducted to determine the fire resistance performance of segment linings according to fiber content in fire resistance methods using synthetic fibers such as PP fibers. As a result, it was confirmed that fire resistance performance required by the relevant project can be secured when using 1.5 kg/m³ of PP fiber. In addition, comparison of the results of PP fibers with PET, a similar synthetic fiber, showed better fire resistance performance than when PP fibers were used.