• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.399-404
• /
• 2013

In order to develop the blends with good long-term thermal stability and tensile elongation, the blends of polyphenylene sulfide (PPS) and 7 kinds of elastomer were tested. PPS/elastomer (90/10, 80/20, 70/30) blend samples were prepared by compression molding after twin screw extrusion or punching after sheet extrusion. Rheological, mechanical property and morphology of the blends were analyzed by capillary rheometer, UTM, impact tester, and SEM. For long-term thermal stability tests, the mechanical properties were measured again after the samples were stored in a convection oven for a week. The tensile strengths were almost same regardless of kinds of elastomer and the tensile elongation was the maximum for the PPS/m-EVA blend. As the content of elastomer increased, the elongation increased but delamination occurred at 30 wt% of elastomer content. The tensile strength increased but the elongation decreased seriously after thermal aging. Many problems related with PPS processing could be solved by adding a small amount of the elastomers partially compatibile with PPS and it would be applicable to develop various PPS grades.

• Journal of Digital Contents Society
• /
• v.16 no.2
• /
• pp.345-353
• /
• 2015

Security Management System is a system which operates in the security control center for security control. All living things across the Internet in recent years, with the rapid increase in the subscriber base has increased the need for network security dramatically depending on yirueojim through web services, thus cyber security sheriff, I have a big issue to build a security management system, each agency and perform control tasks. But the security functional requirements for security management system would not specified exactly, in developing a security management system to build and design a situation that PP's needs require a lot of trouble. In this paper, we develop a Managed Security System Protection Profile for the security functional requirements specification of the security management system.

• Journal of Environmental Science International
• /
• v.21 no.12
• /
• pp.1495-1501
• /
• 2012

In this study, an experiment was conducted on influent water with low concentrations of organic matter, such as river water or secondary treatment water of a sewage treatment plant, according to HRT changes by using aerobic biofilm. In the biofilm process, as the biofilm increases in thickness, the inner membrane can be low in oxygen transfer rate and become anaerobic conditions, while the detachment of biomass from biofilm occurs. To overcome these limitations in the detachment of microorganisms in biofilm, the yarn, which was made from poly propylene(PP), was weaved and manufactured into a tube. Then, a test was carried out by injecting air so that the interior of the biofilm could create aerobic conditions. The results of the experiment showed that the removal efficiency of $TCOD_{cr}$ reached 66.1~81.2% by HRT 2hr, and 50.9 ~61.8% after HRT 1 hr. The removal efficiency of $SCOD_{cr}$ was 45.9 to 55.1% by HRT 1hr, and 26.1% in HRT 0.5hr, showing the highest removal efficiency in HRT 1hr. The SS removal efficiency was at 81.8 to 94.6%, and the effluent SS concentration was very low, indicating less than 2.2 mg/L in all HRT's. As a result, the $SCOD_{cr}$ and $NH_4{^+}$-N that were removed per specific surface area and attached to microbial biofilm showed the highest efficiency in HRT 1hr with 8.37 $gSCOD_{cr}/m^2{\cdot}d$, 2.93 $gNH_4{^+}-N/m^2{\cdot}d$. From the result of reviewing the characteristics of biofilm growth, microorganisms were found to be attached, and increased by 36 days. Later, they decreased in number through detachment, but showed a tendency to increase again 41 days later due to microbial reproduction.

• KSBB Journal
• /
• v.13 no.1
• /
• pp.96-100
• /
• 1998

Two promoters (trc and P$\rho$) were inserted in PHA operon derived from Alcaligenes eutrophus to obtain high chain molecules of polyhydroxybutyrate (PHB) in recombinant Escherichia coli. Newly designed PHA operon was used to control the gene expressions of hydroxybutyric CoA and PHA polymerization, separately. Plasmids containing new synthetic operon was transformed into E. coli DH5$\alpha$ and analyzed for PHB production. Without induction of the PHA biosynthetic operon, PHA synthase which has low activity might supply low concentration of initiator during the polymerization reaction, resulting very high molecular weight of polymer. An increase of PHB average molecular weight was observed with decreased IPTG (isopropyl $\beta$ -Dithiogalactosidase) concentration. When no IPTG was added to the culture of E. coli DH5$\alpha$ /$\rho$ SJS1 which contained two promoters in PHA operon, high chain polymer having an average molecular weight of $2.5{\times}10^7$ was achieved. Analysis of the enzyme activities of PHA biosynthetic enzymes suggests that PHA synthase, the enzyme responsible for polymerizing 3-hydroxybutyric CoA, controls the molecular weight of PHB produced in vivo.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.4
• /
• pp.377-385
• /
• 2012

In this study, the Impact resistance of steel fiber and organic fiber reinforced concrete and mortar was evaluated and the improvement in toughness resulting from an increase in compressive strength and mixing fiber for impact resistance on performance was examined. The types of fiber were steel fiber, PP and PVA, and these were mixed in at 0.1, 0.5 and 1.0 vol.%, respectively. Impact resistance is evaluated with an apparatus for testing impact resistance performance by high-speed projectile crash by gas-pressure. For the experimental conditions, Specimen size was $100{\times}100{\times}20$, 30mm ($width{\times}height{\times}thickness$). Projectile diameter was 7 and 10 mm and impact speed is 350m/s. After impact test, destruction grade, penetration depth, spalling thickness and crater area were evaluated. Through this evaluation, it was found that as compressive strength is increased, penetration is suppressed. In addition, as the mixing ratio of fiber is increased, the spalling thickness and crater area are suppressed. Organic fibers have lower density than the steel fiber, and population number per unit area is bigger. As a result, the improvement of impact resistance is more significant thanks to dispersion and degraded attachment performance.

• Biomolecules & Therapeutics
• /
• v.22 no.4
• /
• pp.295-300
• /
• 2014

The actin cytoskeleton plays an important role in macrophage-mediated inflammatory responses by modulating the activation of Src and subsequently inducing nuclear factor (NF)-${\kappa}B$ translocation. In spite of its critical functions, few papers have examined how the actin cytoskeleton can be regulated by the activation of toll-like receptor (TLR). Therefore, in this study, we further characterized the biological value of the actin cytoskeleton in the functional activation of macrophages using an actin cytoskeleton disruptor, cytochalasin B (Cyto B), and explored the actin cytoskeleton's involvement in morphological changes, cellular attachment, and signaling events. Cyto B strongly suppressed the TLR4-mediated mRNA expression of inflammatory genes such as cyclooxygenase (COX)-2, tumor necrosis factor (TNF)-${\alpha}$, and inducible nitric oxide (iNOS), without altering cell viability. This compound also strongly suppressed the morphological changes induced by lipopolysaccharide (LPS), a TLR4 ligand. Cyto B also remarkably suppressed NO production under non-adherent conditions but not in an adherent environment. Cyto B did not block the co-localization between surface glycoprotein myeloid differentiation protein-2 (MD2), a LPS signaling glycoprotein, and the actin cytoskeleton under LPS conditions. Interestingly, Cyto B and PP2, a Src inhibitor, enhanced the phagocytic uptake of fluorescein isothiocyanate (FITC)-dextran. Finally, it was found that Cyto B blocked the phosphorylation of vasodilator-stimulated phosphoprotein (VASP) at 1 min and the phosphorylation of heat shock protein 27 (HSP27) at 5 min. Therefore, our data suggest that the actin cytoskeleton may be one of the key components involved in the control of TLR4-mediated inflammatory responses in macrophages.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1991.10a
• /
• pp.261-267
• /
• 1991

다품종소량생산의 특징을 갖고 있는 금형공업에서 컴퓨터통합생산시스템(Computer Integrated Manufacturing System;CIMS)의 실현을 위한 중요한 분야의 하나는 부품설계도면으로부터 최종제품을 생산하는데 필요한 공정계획의 자동화, 즉 컴퓨터를 이용하여 공정계획을 자동적으로 생성하는 자동공정계획시스템(Computer Aided Process Planning;CAPP) 기술의 개발이다. 국내외적으로 CAPP분야의 연구는 컴퓨터 지원에 의한 자동화 기술의 급속한 발전과 더불어 지난 20여년 동안에 기계가공품에 관한 CAPP은 약 150여가지가 개발되었으나, 이는 컴퓨터 지원에 의한 설계의 자동화(Computer Aided Design;CAD)나 컴퓨터 지원에 의한 제조의 자동화(Computer Aided Manufacturing;CAM)분야에 비해 상대적으로 저조한 형편이다. 특히 금형을 대상으로 한 CAPP시스템의 개발은 아직 초기단계에 있기 때문에, 본 연구에서는 사출금형을 대상으로 하여 실용성이 있는 공정설계시스템을 개발함을 목적으로 한다. 일반적으로 공정계획은 "소재로부터 제품을 경제적, 효율적으로 생산하는데 필요한 제조공정의 체계적인 결정"이라고 정의할 수 있다. 공정계획은 제품의 종류와 수량, 재료와 부품의 종류, 보유 생산설비와 제조기술의 수준에 따라 다르나, 공정설계(Process Design)와 작업설계(Operation Design)로 구분할 수 있다. 본 연구에서는 공정계획을 광의의 공정설계로 정의하고, 공정설계와 공정계획을 동의어로 통용토록 한다. 기존의 CAPP시스템의 개발에 관한 기본적인 접근방법은 변성형방법(Variant method), 창성형방법(Generative method) 및 자동화방법(Automatic method)이 있다. 이들 CAPP시스템을 개발할 때 사용하는 기법은 크게 5가지- (1) GT(group Technology) 접근기법, (2) Bottom-up 접근기법, (3) Top-down 접근기법, (4) AI와 전문가시스템(Expert System) 접근기법, (5) 컴퓨터 프로그래밍 언어 - 로 분류할 수 있다. 본 연구에서는 전문가시스템 기법을 도입해서 사출금형 공정계획전문가의 지식과 경험을 획득하여 지식베이스를 구축하고, 전문가시스템 셀(shell)중 CLIPS를 이용하여 자동공정계획시스템인 Mold CAPP을 개발하였다.PP을 개발하였다.

• Korean Journal of Adult Nursing
• /
• v.19 no.5
• /
• pp.27-36
• /
• 2007

Purpose: The purpose of this study was to investigate the knowledge and learning needs on coronary artery disease in diabetic patients by glycemic control. Methods: The subjects consisted of 188 patients at the hospital who had diabetes mellitus. Data was obtained using a knowledge and learning needs questionnaire from January to April 2006. Results: Treatment method, the levels of fasting blood glucose(FBG), and 2-hour postprandial blood glucose(PP2hr) showed meaningful differences between normo-glycemic group(HbA1c < 7%) and hyper-glycemic group($HbA1c{\geq}7%$). The levels of knowledge on coronary artery disease by glycemic control tend to show higher in normo-glycemic group. Etiology and prevention of coronary artery disease were significantly higher in normo-glycemic group than in hyper-glycemic group. The levels of learning needs on coronary artery disease by glycemic control tend to show higher in normo-glycemic group. The learning needs on items of diet control were higher in normo-glycemic group than in hyper-glycemic group. Conclusion: On the base of these results, we should focus on the coronary artery disease education for hyper-glycemic group. Also individual coronary artery disease educational program should be developed for the patients with different level of knowledge and learning needs.

• Journal of Broadcast Engineering
• /
• v.21 no.5
• /
• pp.689-703
• /
• 2016

A dispute over price for retransmitting terrestrial channels between Terrestrial Television Systems and Cable TV System Operator(SO)s has been underway up to now since 2007 and expected to last unless there is a measure of extraordinary countermeasures. Thus, in this paper, we present a scheme for calculating the reasonable price on retransmitting terrestrial channels. Re-transmission price calculation scheme is presented in two ways. One is to calculate the price for the extent to which Terrestrial broadcasters and Cable broadcasters contribute, and the other is to calculate the price for terrestrial channels retransmitted by applying the method of Cable TV PP program fee basis. In addition, on profit-sharing scheme and criteria for program fee we present two ways of subscription, which are flat sum system and fixed rate system.

• Korean Journal of Animal Reproduction
• /
• v.22 no.1
• /
• pp.61-66
• /
• 1998

In vitro contractile response of the uterus in the pregnant rat to oxytocin increases with advancing gestation. This increase coincides with an increase in uterine oxytocin receptor number. However, in vitro the change in uterine contractile response of the pregnant uterus to oxytocin with advancing gestation is not clear. The purpose of the present study was to find out that the uterine response in vitro to oxytocin changes as delivery a, pp.oaches. Secondly, to determine if the incubation of uterine tissue in vitro altered the uterine oxytocin receptor number and affinity and thus explain the ambiguity between the in vitro and in vitro results. The studies were performed on rats at days 15, 20 and 21 or pregnancy. In vitro the uterine contractile response to oxytocin was sgreater (P<0.05) at day 21 compared to days 15 and 20 (Emax : 724.8　88.9, 130.0　81.5 and 133.4　53.4, respectively). This correlated with a significant increase (P<0.05) in uterine oxytocin receptor number at day 21 (days 21, 15 and 20 : 540　89, 53　24, 89　35 fmoles/mg protein, respectively). However, the kids at days 15, 20 and 21 did not differ (P>0.05). Finally no difference (P>0.05) in oxytocin receptor number or affinity was detected between incubated and non-incubated tissue. The results of these studies suggest that either pre-oxytocin or post-oxytocin receptor factors are important in determining the uterine myometrial responsiveness to oxytocin.